| [1] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Simulation of heating process for martensitic heat resistant steel G115 heavy pipe blanks
[J]. Heat Treatment of Metals, 2022, 47(4): 208-212.
|
| [2] |
Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun.
Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings
[J]. Heat Treatment of Metals, 2022, 47(4): 263-267.
|
| [3] |
Cai Xianjie, Wu Boya, Zuo Pengpeng, Li Junwan, Guo Wei.
Thermal fatigue failure behavior of die-casting insert
[J]. Heat Treatment of Metals, 2022, 47(2): 250-256.
|
| [4] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [5] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [6] |
Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili.
Finite element simulation of quenching process of large aluminum alloy forgings
[J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
|
| [7] |
Li Dongsheng, Zhao Enxu, Wang Wei, Tan Li, Zhang Junpeng, Tian Zhenyu.
High temperature constitutive model and dynamic recrystallization model of IN690 alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 8-14.
|
| [8] |
Li Junheng, Wu Yunxin, Gong Hai.
Effect of bulging on quenching residual stress of 2219 aluminum alloy ring
[J]. Heat Treatment of Metals, 2021, 46(7): 114-119.
|
| [9] |
Cui Lujun, Hao Chaojie, Guo Shirui, Zheng Bo, Cao Yanlong, Zeng Wenhan.
Theoretical analysis and experimental research on laser cladding trajectory for slender shaft
[J]. Heat Treatment of Metals, 2021, 46(7): 201-206.
|
| [10] |
Yi Huaqing, Liu Ke, Su Zhen, Yang Bing, Shu Bing, Luo Zixiang.
Construction and numerical simulation of BH compound carburizing control system
[J]. Heat Treatment of Metals, 2021, 46(7): 212-217.
|
| [11] |
Guo Shirui, Zhang Shihao, Che Jiangning, Cui Lujun, Zheng Bo.
Numerical simulation of surface laser quenching and microstructure and properties of 420B stainless steel dental chisel
[J]. Heat Treatment of Metals, 2021, 46(4): 147-151.
|
| [12] |
Wang Linchun, Wu Yongqiang, Wang Kaikun, Li Heng.
Numerical simulation of heat treatment for 3Cr2NiMo steel module bulk after forging
[J]. Heat Treatment of Metals, 2021, 46(3): 184-190.
|
| [13] |
Xue Xuan, Shen Gang, Yang Xingyun, Gu Jianfeng, Wang Jing, Zhang Weimin.
Development and application of mesomechanical modeling and simulation software for polycrystalline materials
[J]. Heat Treatment of Metals, 2021, 46(2): 204-208.
|
| [14] |
Wang Tong, Lu Wenlin, Li Qing, Du Chunhui, Chen Xuyang, Xue Danruo.
Numerical simulation and analysis of vacuum heating temperature field of hydrogen treatment furnace
[J]. Heat Treatment of Metals, 2021, 46(2): 209-212.
|
| [15] |
Zhang Zhanzhan, Ning Jiaqing, Zuo Lingli, Liao Haiyang.
Effect of process parameters on interfacial microstructure of WC particle reinforced surface composite and steel substrate
[J]. Heat Treatment of Metals, 2021, 46(11): 131-136.
|
