| [1] |
Wang Tao, Zhao Kang.
Influence of oil groove mechanism of mesh belt furnace on taper distortion of deep groove ball bearings
[J]. Heat Treatment of Metals, 2021, 46(6): 24-26.
|
| [2] |
Yu Guoqing, Jing Ran, Wang Guodi, Zhang Manxue, Feng Tian, Xie Niansuo.
Effect of MAO voltage on friction and wear properties of TC4 alloy oxide film
[J]. Heat Treatment of Metals, 2021, 46(11): 126-130.
|
| [3] |
Chen Zixin, Zhou Houming, Zhu Yuxu, Zhang Zhehao, He Fangjia, Xu Caixing, Liu Gang.
Microstructure and properties of laser clad Ni-Al composite coatings on Cr12MoV steel
[J]. Heat Treatment of Metals, 2021, 46(11): 226-231.
|
| [4] |
Wang Qinjuan, Lin Shaoyang, Chen Zhongshi, Liu Dong.
Influence of nitriding time in QPQ technology on microstructure and friction properties of alloy cast iron
[J]. Heat Treatment of Metals, 2021, 46(10): 226-231.
|
| [5] |
Xia Sihai, Wu Meiping, Ma Yiqing, Cui Chen.
Effect of TiC content on microstructure and properties of laser clad layer on TC4 alloy
[J]. Heat Treatment of Metals, 2020, 45(6): 212-215.
|
| [6] |
Song Jinsong, Jia Zhining, Zhang Tianxu, Xu Xiaodong, Xie Ying, Yan Dianran.
Effect of Ti on microstructure and properties of plasma sprayed Fe-Al2O3-FeAl2O4 composite coating
[J]. Heat Treatment of Metals, 2020, 45(4): 199-203.
|
| [7] |
Tian Wu, Dai Jiaoyan, Bao Mingdong, Zhang Lijun, Chang Yongqiang, Wang Shimin, Yu Shengwang.
Evolution of silicon-manganese phase at high temperature and its effect on wear resistance of brasses containing silicon and manganese
[J]. HTM, 2020, 45(3): 15-19.
|
| [8] |
Zhu Shuang, Liu Yun, Xie Liming, Hao Shiming.
Effect of T6 heat treatment on friction and wear properties of SiCp/Al composites
[J]. HTM, 2020, 45(3): 114-118.
|
| [9] |
Yang Zhen, Fan Xiangfang, Qiu Changjun, Li Yong, Liu Ning.
Effect of laser power on quenched microstructure and friction and wear properties of 40CrNiMoA steel
[J]. HTM, 2020, 45(3): 128-132.
|
| [10] |
Wang Yongkun, Qin Hong, Yang Jing, Miao Xueqiang, Liu Hui'e, Chen Chao.
Applicant of hydrogenated diamond like coating on plunger for marine diesel engine
[J]. Heat Treatment of Metals, 2020, 45(11): 226-231.
|
| [11] |
Liu Yangguang, Xu Xiaojing, Song Zhenhua, Wang Yang, Zhu Liangliang, Zhu Jinsong.
Effect of La2O3 additive and salt bath temperature on oxygen-boronized microstructure and properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2020, 45(10): 180-186.
|
| [12] |
Zhou Dandan1,Sun Ronglu1,2.
Effect of laser scanning speed on microstructure and properties of nickel-based h-BN composite coating
[J]. HTM, 2017, 42(4): 167-171.
|
| [13] |
TANG You liang1 *, CAI Wei ping2, ZHANG Jing1.
Laser cladding preparation and characterization of Ni based composite coating
[J]. HTM, 2017, 42(4): 180-184.
|
| [14] |
Song Min1, Cheng Hao2, Chai Pinpin2, Zhu Shuaishuai2.
Friction and wear performance of laser surface textured titanium nitride film
[J]. HTM, 2017, 42(4): 185-190.
|
| [15] |
Kong Weihuan1,2, Hou Huijun2, Lu Dehong1,Wei Chunbei2, Zhang Lingling2.
Microstructure and properties of long-term exterior antibacterial stainless steel silvered with different cycle
[J]. HTM, 2017, 42(2): 146-151.
|
