| [1] |
Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun.
Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings
[J]. Heat Treatment of Metals, 2022, 47(4): 263-267.
|
| [2] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [3] |
Lu Rui, Ke Wenmin, Kuang Qiao, Rao Liangbin, Ding Qi, Lu Jinxiang.
Heat treatment distortion control of aero-engine output shaft made of 16Ni3CrMoE steel
[J]. Heat Treatment of Metals, 2022, 47(2): 168-172.
|
| [4] |
Shi Keqing, Guo Fu, An Longsen, Chen Yun, Du Ziyang, Wu Meng, Xu Qinpei.
Heat treatment process of 42CrMo4 steel wind power main shaft
[J]. Heat Treatment of Metals, 2021, 46(8): 201-204.
|
| [5] |
Jiao Li, Shang Haikun, He Jianfeng, Zhao Yingjun, Zhang Weimin, Li Weimin, Zhou Lanmei.
Fracture failure analysis of 42CrMo steel high strength bolts for diesel engine
[J]. Heat Treatment of Metals, 2021, 46(6): 245-249.
|
| [6] |
Mi Pei, Sun Yongpeng, Zhang Yong.
Causes and improvement methods of induction quenching cracks in mining toothed rail
[J]. Heat Treatment of Metals, 2021, 46(6): 250-252.
|
| [7] |
Zhang Jiawen, Fu Tianliang, Wu Hao, Wang Zhaodong.
Cause analysis on quenching cracking of 40CrNiMo7 steel forged shaft
[J]. Heat Treatment of Metals, 2021, 46(2): 213-217.
|
| [8] |
Cheng Yuan, Hu Fangzhong, Yang Shaopeng, Wang Kaizhong, Jin Guozhong, Chen Shijie, Wang Lianglin.
Cracking failure analysis of 40Cr steel forgings for automobile front axle
[J]. Heat Treatment of Metals, 2021, 46(12): 294-297.
|
| [9] |
Qiao Da, Bian Xiangde, Fu Jinglun, Ding Linchao, Wang Tong, Lu Wenlin.
Fluid-thermal-solid coupling simulation analysis of thermohydrogen treatment furnace specially for large aviation components
[J]. Heat Treatment of Metals, 2021, 46(1): 214-219.
|
| [10] |
Zhang Leitao, Zhang Hongxing, Liu Dexin, Zhang Weiqiang, Wang Xuesong, Dai Jiaoyan, Xu Jinfu.
Research progress on causes and control of cracks in laser clad composite coatings
[J]. Heat Treatment of Metals, 2020, 45(8): 233-239.
|
| [11] |
Yuan Jingzhi, Shi Yuezhi, Xu Wenhua, Chen Lubin, Lü Yupeng.
Structure-defect analysis of crack failure in 42CrMo wind power spindle
[J]. Heat Treatment of Metals, 2020, 45(7): 206-209.
|
| [12] |
Yang Hongquan, Xu Xiangjiu, Zhou Jingcao.
Analysis on quenching cracks of SA-387Gr.91 steel spherical head
[J]. Heat Treatment of Metals, 2020, 45(7): 219-223.
|
| [13] |
Chen Kaimin, Wen Chao, Liang Huilei.
Crack analysis of bearing chock and prevention measures
[J]. Heat Treatment of Metals, 2020, 45(4): 221-223.
|
| [14] |
Dong Dengchao, Zhang Ke, Wu Yuanyuan, Hong Huimin.
Cracking analysis of wearable steel ball during ball falling test
[J]. HTM, 2017, 42(4): 200-203.
|
| [15] |
Wang Changjian.
Failure analysis of quenching cracks of 45 steel taper sleeve
[J]. HTM, 2017, 42(4): 204-207.
|
