| [1] |
Chen Dongjun, Li Guangyang, Liu Gang.
Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
|
| [2] |
Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang.
Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
|
| [3] |
Gao Jie, He Chengxu, Song Wenle, Yang Fuyao, Liu Yang.
Effects of longitudinal magnetic annealing and tensile stress on magnetic characteristics and iron loss of 1K101 amorphous alloy ribbon
[J]. Heat Treatment of Metals, 2022, 47(3): 39-43.
|
| [4] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [5] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [6] |
Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian.
Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature
[J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
|
| [7] |
Li Mingxiang, Yang Ping, He Wei, Zhang Meng, Wang Wenbo.
Failure analysis of hydrogen induced delayed fracture of 50CrVA steel spring
[J]. Heat Treatment of Metals, 2022, 47(3): 257-260.
|
| [8] |
Yang Yuchuan, Li Wei, Xiong Yong.
Analysis of fracture cause of 1Cr17Ni2 steel small shaft of control box
[J]. Heat Treatment of Metals, 2022, 47(3): 261-265.
|
| [9] |
Li Yongshun, Xuan Weidong, Duan Fangmiao, Zhao Yujuan, Li Junjie, Wang Baojun, Ren Xingfu, Ren Zhongming.
Effect of stress on recrystallization of single crystal superalloy
[J]. Heat Treatment of Metals, 2022, 47(2): 48-52.
|
| [10] |
Lu Rui, Ke Wenmin, Kuang Qiao, Rao Liangbin, Ding Qi, Lu Jinxiang.
Heat treatment distortion control of aero-engine output shaft made of 16Ni3CrMoE steel
[J]. Heat Treatment of Metals, 2022, 47(2): 168-172.
|
| [11] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [12] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [13] |
Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia.
Failure analysis of 20 steel equal-diameter tee
[J]. Heat Treatment of Metals, 2022, 47(2): 262-266.
|
| [14] |
Nong Xin, Gao Jinzhong, Wu Junwu, Shi Chunsheng, Zhao Naiqin.
Stress relaxation mechanism of 1Cr18Ni9 steel helical compression spring
[J]. Heat Treatment of Metals, 2022, 47(1): 106-112.
|
| [15] |
Zhao Xiaojun, Liang Xiao, Cai Zhenyang, Xiao Lairong.
Effect of aluminizing and oxidation treatment on microstructure and mechanical properties of CLAM steel
[J]. Heat Treatment of Metals, 2022, 47(1): 192-196.
|
