| [1] |
Liu Zhiqiao, Feng Qingxiao, Li Hualong, Li Tengfei.
Effect of annealing process on microstructure and mechanical properties of low carbon bainitic steel
[J]. Heat Treatment of Metals, 2022, 47(3): 53-56.
|
| [2] |
Tian Yaqiang, Cai Zhixin, Xu Haiwei, Zhang Hongjun, Han Yun, Di Guobiao, Chen Liansheng.
Thermodynamics of C and Mn element partitioning during austenite reverted transformation in medium manganese steel
[J]. Heat Treatment of Metals, 2022, 47(3): 159-164.
|
| [3] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [4] |
Li Xiao, Cheng Xiaonong, Xu Guifang, Yang Chengkang, Chen Leli.
Effect of annealing process on microstructure and mechanical properties of 3003 aluminum alloy plate
[J]. Heat Treatment of Metals, 2021, 46(9): 90-94.
|
| [5] |
Zhou Zeyu, Xiao Xiang, Zheng Zhikai, Chen Baoan, Xu Jing, Xia Feifei.
Effect of annealing process on microstructure and properties of Al-Zr-Er high conductivity aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 108-115.
|
| [6] |
Zhang Nan, Li Yan, Ding Wei.
Microstructure and mechanical properties of 0.2C-5Mn-0.5Si-2.5Al medium manganese steel after intercritical annealing
[J]. Heat Treatment of Metals, 2021, 46(7): 37-42.
|
| [7] |
Liu Tianzeng, Wang Ke, Cheng Anzhong, Li Hongliang.
Effect of stabilization treatment on second phase and properties of347H stainless steel
[J]. Heat Treatment of Metals, 2021, 46(7): 149-154.
|
| [8] |
Li Ge, Guo Yanjun, Wang Lu, Zhu Haibao, Tian Linan.
Cracking failure analysis of 20Cr1Mo1VNbTiB steel steam turbine valve bolts in a power plant
[J]. Heat Treatment of Metals, 2021, 46(5): 248-252.
|
| [9] |
Sang Heng, Jing Hemin, Song Guangsheng, Chen Zheng.
Microstructure and corrosion properties of solution treated AZ91-xCu alloys
[J]. Heat Treatment of Metals, 2021, 46(3): 125-129.
|
| [10] |
Shi Xiaoxia, Li Xiao, Ren Huiping, Jin Yan, Jia Pengxia.
Effects of quenching and tempering on microstructure and properties of 10Cr5MoVRE steel and second phase precipitation behavior
[J]. Heat Treatment of Metals, 2021, 46(2): 125-129.
|
| [11] |
Zhao Kai, Yang Zhongmin, Li Jiarui, Chen Ying, Cao Yanguang, Li Zhaodong.
Effect of heat treatment process on precipitates and shape memory properties of Fe-15Mn-4.5Si-10Cr-5Ni shape memory alloy
[J]. Heat Treatment of Metals, 2021, 46(12): 7-12.
|
| [12] |
Peng Siyuan, Deng Xiangtao, Liang Liang, Fu Tianliang, Liu Ning, Wang Zhaodong.
Effect of quenching temperature on microstructure and properties of novel NM450 corrosion-wear resistant steel
[J]. Heat Treatment of Metals, 2021, 46(12): 223-228.
|
| [13] |
Xu Pingsan, Guo Yue, Dai Fangqin, Zeng Xican, Hu Shoutian, Liu Min.
Effect of parameter in secondary heating stage of high temperature annealing process on formation of bottom layer on HiB steel
[J]. Heat Treatment of Metals, 2021, 46(10): 173-177.
|
| [14] |
Li Huiyuan, Dai Jietao, Xian Lingbiao, Ren Jianping, Li Liejun.
Effect of annealing process on microstructure and properties of dual phase steel DP590GA
[J]. Heat Treatment of Metals, 2021, 46(1): 50-54.
|
| [15] |
Li Jitao, Zhao Wenzhong, Tian Changliang.
Influence of post-weld annealing process on fatigue life of cross joint
[J]. Heat Treatment of Metals, 2020, 45(9): 86-90.
|
