| [1] |
Qi Xiaoliang, Li Yan, Ding Wei, Zhao Zengwu.
Effect of original microstructure of medium manganese TRIP steel containing Al on microstructure and mechanical properties after intercritical annealing
[J]. Heat Treatment of Metals, 2022, 47(4): 24-29.
|
| [2] |
Lian Yibo, Yang Chunlei, Wang Guodong, Song Wei.
Effect of solution treatment on microstructure of GH4080A superalloy
[J]. Heat Treatment of Metals, 2022, 47(4): 46-52.
|
| [3] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [4] |
Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng.
Effect of magnetic field pre-annealing on microstructure and texture of CGO steel
[J]. Heat Treatment of Metals, 2022, 47(4): 128-132.
|
| [5] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [6] |
Yang Jie, Ren Huiping, Liu Zongchang.
Kinetics of austenite grain growth of 15Cr12CuSiMoMn steel
[J]. Heat Treatment of Metals, 2022, 47(2): 53-58.
|
| [7] |
Liu Tao, Wu Hongyan, Gao Xiuhua, Qin Dongyang, Du Linxiu.
Effect of intercritical tempering temperature on microstructure and mechanical properties of Fe-4Mn-1.2Cr-0.3Cu-0.6Ni medium manganese steel
[J]. Heat Treatment of Metals, 2022, 47(2): 91-98.
|
| [8] |
Chen Jianwen, Yuan Wufeng, Jiang Yizhou, Zhang Chen, Yi Huaqing, Gao Yiqiang.
Effect of forging heating temperature on austenite grain growth and mechanical properties of 20Cr2Ni4A steel
[J]. Heat Treatment of Metals, 2022, 47(2): 112-118.
|
| [9] |
Dai Yongjuan, Wu Xiangxiang, Li Jiakun, Guo Dong, Wang Bo.
Effect of annealing temperature on microstructure and properties of Fe-24.38Mn-0.44C TWIP steel
[J]. Heat Treatment of Metals, 2022, 47(2): 146-152.
|
| [10] |
Dong Rui, Chen Lin, Cen Yaodong, Bao Xirong.
Microstructure and fatigue crack growth of a bainitic steel under different heat treatments
[J]. Heat Treatment of Metals, 2022, 47(2): 153-158.
|
| [11] |
Hou Yaqing, Zhang Yu, Yu Mingguang, Wang Jingjing, Yang Li, Su Hang.
Thermodynamic calculation of retained austenite content in Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(1): 25-31.
|
| [12] |
Gao Yaping, Shi Zhongran, Jia Juan, Luo Xiaobing, Song Xinli.
Effect of heat treatment process on microstructure and abrasive wear properties of dredging engineering ship steel
[J]. Heat Treatment of Metals, 2022, 47(1): 32-37.
|
| [13] |
Qiu Xuyangfan, Yang Zhuoyue, Ding Yali.
Solid solution treatment for improving cryogenic temperature toughness of Cr-Ni-Mo-Ti maraging stainless steel
[J]. Heat Treatment of Metals, 2022, 47(1): 44-48.
|
| [14] |
Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren.
Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 130-134.
|
| [15] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
