Heat treatment process improvement of pneumatic clutch wheel hub

doi:10.13251/j.issn.0254-6051.2020.12.025

Abstract

Abstract: Taken GCr15SiMn steel pneumatic clutch wheel hub as a object, the original quenching and tempering process was optimized in order to reduce the heat treatment distortion. The results show that the distortion of the hub is significantly reduced by adding stress relief annealing and cryogenic treatment processes, which meets the technical requirements of dimension, and the surface hardness distribution of the hub is more uniform.

Key words: pneumatic clutch wheel hub, heat treatment, process optimization, distortion, hardness

CLC Number:

TG156

Sun Guojin, Hou Miaoyu, Gao Jiawu, Ren Tai'an, Gao Daoxu. Heat treatment process improvement of pneumatic clutch wheel hub[J]. Heat Treatment of Metals, 2020, 45(12): 128-131.

References

[1] 范光明. 浅析矿山球磨机的安装与调试方法[J]. 世界有色金属, 2018(3): 46-48.
Fan Guangming.Analysis on the installation and debugging method of mine ball mill[J]. World Nonferrous Metals, 2018(3): 46-48.
[2] 李敏. 矿山球磨机的安装与调试方法[J]. 世界有色金属, 2020(4): 50-51.
Li Min.The installation and debugging method of the ball mill in the mine[J]. World Nonferrous Metals, 2020(4): 50-51.
[3] 杜寄勇, 张锐婷, 阎凌峰. 球磨机钢结构基础可行性分析[J]. 现代制造技术与装备, 2019(10): 155-156.
Du Jiyong, Zhang Ruiting, Yan Lingfeng.Feasibility analysis of steel structure foundation of ball mill[J]. Modern Manufacturing Technology and Equipment, 2019(10): 155-156.
[4] 熊伟, 杨阳, 梅松, 等. 轮毂轴承内法兰盘淬火工艺优化[J]. 金属热处理, 2019, 44(8): 226-229.
Xiong Wei, Yang Yang, Mei Song, et al.Optimization of quenching process of inner flange plate of hub bearing[J]. Heat Treatment of Metals, 2019, 44(8): 226-229.
[5] Zhang Z, Ma X J, Liu C G, et al.Dual-steering mode based on direct yaw moment control for multi-wheel hub motor driven vehicles: Theoretical design and experimental assessment[J]. Defence Technology, 2020, DOI: 10. 1016/j. dt. 2020. 05. 004.
[6] Xu P F, Duan S Y, Wang F.Reverse modeling and topological optimization for lightweight design of automobile wheel hubs with hollow ribs[J]. International Journal of Computational Methods, 2020, 17(9): 1950064.
[7] 白帮伟, 武汉琦, 吴群虎, 等. 轮毂热处理变形行为探究[J]. 铸造, 2016, 65(10): 990-994.
Bai Bangwei, Wu Hangqi, Wu Qunhu, et al.The deformation behavior of the heat treated wheels[J]. Foundry, 2016, 65(10): 990-994.
[8] 李钊, 吴润, 徐乐, 等. 30CrMoTi钢的组织遗传及晶粒细化[J]. 金属热处理, 2018, 43(2): 116-121.
Li Zhao, Wu Run, Xu Le, et al.Structure heredity and grain refinement of 30CrMoTi steel[J]. Heat Treatment of Metals, 2018, 43(2): 116-121.
[9] Huang S J, Ali A N.Effects of heat treatment on the microstructure and microplastic deformation behavior of SiC particles reinforced AZ61 magnesium metal matrix composite[J]. Materials Sicence and Engineering A, 2018, 711(10): 670-682.
[10] Rao K M P, Prabhu K N. Assessment of cooling performance of neem oil for distortion control in heat treatment of steel[J]. Journal of Materials Engineering and Performance, 2020(29): 6033-6043.
[11] 余斌, 李晓源, 时捷, 等. 高温回火对GCr15SiMn轴承钢组织和力学性能的影响[J]. 金属热处理, 2015, 40(2): 176-179.
Yu Bin, Li Xiaoyuan, Shi Jie, et al.Effect of high temperature tempering on microstructure and mechanical properties of GCr15SiMn bearing steel[J]. Heat Treatment of Metals, 2015, 40(2): 176-179.
[12] 黄超, 张丹, 王威, 等. 加热温度和保温时间对轴承钢GCr15SiMn碳化物的影响[J]. 材料热处理学报, 2015, 36(4): 156-161.
Huang Chao, Zhang Dan, Wang Wei, et al.Effect of heating temperature and holding time on carbide of GCr15SiMn bearing steel[J]. Transactions of Materials and Heat Treatment, 2015, 36(4): 156-161.
[13] 米振莉, 张小垒, 李志超, 等. 热处理工艺对高碳铬轴承钢组织和性能的影响[J]. 材料热处理学报, 2015, 36(7): 123-128.
Mi Zhengli, Zhang Xiaolei, Li Zhichao, et al.Effect of heat treatment process on microstructure and properties of a high carbon chromium bearing steel[J]. Transactions of Materials and Heat Treatment, 2015, 36(7): 123-128.
[14] 隋庆茹, 刘晓彦, 韩智慧. GCr15SiMn轴承钢热处理的计算机控制系统设计[J]. 工具技术, 2016, 50(2): 46-49.
Sui Qingru, Liu Xiaoyan, Han Zhihui.Design of computer control system of GCr15SiMn bearing steel heat treatment process[J]. Tool Engineering, 2016, 50(2): 46-49.
[15] 苏丽婷, 张福成, 郑春雷, 等. 热处理工艺和充氢对GCr15SiMoAl轴承钢压缩性能的影响[J]. 材料热处理学报, 2017, 38(2): 111-117.
Su Liting, Zhang Fucheng, Zheng Chunlei, et al.Effect of heat treatment process and hydrogen charging on compression properties of GCr15SiMoAl bearing steel[J]. Transactions of Materials and Heat Treatment, 2017, 38(2): 111-117.
[16] 张硕, 徐梓真, 张冰, 等. 高能电脉冲-超声滚压耦合技术对淬火态GCr15钢表面强化研究[J]. 材料导报, 2017, 31(1): 82-86.
Zhang Shuo, Xu Zizheng, Zhang Bing, et al.Surface properties of quenched GCr15 steel enhanced by electropulsing ultrasonic surface rolling process[J]. Materials Review, 2017, 31(1): 82-86.
[17] 雷日扬. 热处理工艺对机床滚珠丝杠用GCr15SiMn轴承钢性能的影响[J]. 铸造技术, 2015, 36(8): 2003-2006.
Lei Riyang.Effect of heat treatment process on properties of GCr15SiMn bearing steel[J]. Foundry Technology, 2015, 36(8): 2003-2006.
[18] 郑晓猛, 杜三明, 张永振, 等. 磨削加工对GCr15SiMn轴承钢表面组织性能的影响[J]. 材料热处理学报, 2020, 41(1): 86-93.
Zheng Xiaomeng, Du Sanming, Zhang Yongzhen, et al.Effect of grinding on surface microstructure and properties of GCr15SiMn bearing steel[J]. Transactions of Materials and Heat Treatment, 2020, 41(1): 86-93.
[19] 杨亮, 李世健, 成国光, 等. 电渣重熔GCr15SiMn轴承钢轧材夹杂物特征研究[J]. 上海金属, 2014, 36(4): 14-18.
Yang Liang, Li Shijian, Cheng Guoguang, et al.Study on inclusions in the rolled metal of bearing steel GCr15SiMn through ESR process[J]. Shanghai Metals, 2014, 36(4): 14-18.