Effect of cryogenic treatment on wear property of YG10 cemented carbide

doi:10.13251/j.issn.0254-6051.2021.01.003

Abstract

Abstract: With YG10 cemented carbide as the research object and cryogenic treatment technology as the methods,the specimens were treated at different cryogenic temperature,cryogenic holding time and alternating times by orthogonal test,and the treated specimens were subjected to wear test,hardness test and microstructure analysis test.The results show that the microhardness is increased by 33.6%,the wear resistance is increased by 72.8% after the optimal cryogenic treatment,and the cryogenic temperature is the biggest factor affecting the wear resistance of YG10 cemented carbide.The reasons for this phenomenon are as follows:in terms of microstructure,the dispersive distribution of η phase and the density change of Co phase enhance the wear resistance of cemented carbide.

Key words: cemented carbide, cryogenic treatment, wear resistance, microhardness, worn topography

CLC Number:

TG156.9

Yan Xianguo, Yao Yongchao, Chen Zhi, Guo Hong, Li Fan, Hou Qiang. Effect of cryogenic treatment on wear property of YG10 cemented carbide[J]. Heat Treatment of Metals, 2021, 46(1): 11-18.

References

[1] 赵丽娟,田震,郭辰光.矿用截齿失效形式及对策[J].金属热处理,2015,40(6):194-198.
Zhao Lijuan,Tian Zhen,Guo Chenguang.Failure modes and countermeasures of a mining pick[J].Heat Treatment of Metals,2015,40(6):194-198.
[2] Liu S,Ji H,Liu X.Effect of pick working angle on the cutting performance of a cutting head[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering,2017,39(10):4147-4159.
[3] Zhou W,Wang H,Wang D,et al.The effect of geometries and cutting parameters of conical pick on the characteristics of dust generation:Experimental investigation and theoretical exploration[J].Fuel Processing Technology,2020,198(2):106-243.
[4] 郭孝敏.面向再制造截齿的有限元分析及疲劳寿命预测[D].太原:中北大学,2019.
Guo Xiaomin.Finite element analysis and fatigue life prediction for remanufactured cutting teeth[D].Taiyuan:North University of China,2019.
[5] 汪旭超.采煤机截齿齿体耐磨性能研究[D].武汉:武汉科技大学,2011.
Wang Xuchao.The abrasive resistance study about the cutting picker of coal cutter[D].Wuhan:Wuhan University of Science and Technology,2011.
[6] Adem Ćićek,Turgay KIvak,Ilyas Uygur,et al.Performance of cryogenically treated M35 HSS drills in drilling of austenitic stainless steels[J].The International Journal of Advanced Manufacturing Technology,2012,60(4):65-73.
[7] Li B,Zhang S,Zhang T,et al.Effect of deep cryogenic treatment on microstructure,mechanical properties and machining performances of coated carbide tool[J].Journal of the Brazilian Society of Mechanical Sciences and Engineering,2018,41(1):19-27.
[8] 尹福兰,丁国富,杨大治,等.深冷处理对涂层硬质合金刀具耐磨性的影响[J].金属热处理,2018,43(9):98-102.
Yi Fulan,Ding Guofu,Yang Dazhi,et al.Effect of cryogenic treatment on wear resistance of coated carbide tool[J].Heat Treatment of Metals,2018,43(9):98-102.
[9] 张涛.深冷处理对硬质合金刀具微观组织及切削性能的影响[D].济南:山东大学,2018.
Zhang Tao.Effect of cryogenic treatment on microstructure and cutting performance of cemented carbide tools[D].Jinan:Shandong University,2018.
[10] Varghese V,Ramesh M R,Chakradhar D.Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel[J].Journal of Manufacturing Processes,2019,37(1):242-250.
[11] Weng Z,Gu K,Wang K,et al.Effect of deep cryogenic treatment on the fracture toughness and wear resistance of WC-Co cemented carbides[J].International Journal of Refractory Metals and Hard Materials,2019,85(12):2-6.
[12] 蒋一江,闫献国,陈峙,等.磁场深冷处理对42CrMo钢耐磨性的影响[J].金属热处理,2020,45(1):91-95.
Jiang Yijiang,Yan Xianguo,Chen Zhi,et al.Effect of magnetic cryogenic treatment on wear resistance of 42CrMo steel[J].Heat Treatment of Metals,2020,45(1):91-95.
[13] 陈峙,高源,闫献国,等.深冷处理对50CrVA板簧钢耐磨性的影响[J].金属热处理,2019,44(12):116-119.
Chen Zhi,Gao Yuan,Yan Xianguo,et al.Effect of cryogenic treatment on wear resistance of 50CrVA plate spring steel[J].Heat Treatment of Metals,2019,44(12):116-119.

[1]	Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng. Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing [J]. Heat Treatment of Metals, 2022, 47(4): 245-250.
[2]	Luo Jiandong, Hu Yanhong, Lin Yuzhou. Application of low temperature nitriding process with double power supplies on 316 stainless steel [J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
[3]	Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun. Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
[4]	Shi Haifang, Li Qiang. Effect of carbon content on microstructure and properties of Al_0.5Co_0.5NiCrFe high-entropy alloy coating [J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
[5]	Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang. Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel [J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
[6]	Zhou Zhongping, Zhang Xiaojuan, Bai Lu, Yu Fangyin, Min Yong'an. Microstructure and properties of T250 steel after plasma nitriding [J]. Heat Treatment of Metals, 2022, 47(3): 210-214.
[7]	Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin. Research progress of laser modification technology for titanium alloy surface [J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
[8]	Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li. Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel [J]. Heat Treatment of Metals, 2022, 47(2): 178-182.
[9]	Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu. Effect of cryogenic treatment on surface properties of TC4 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
[10]	Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding [J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
[11]	Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng. Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface [J]. Heat Treatment of Metals, 2022, 47(1): 185-191.
[12]	Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi. Preparation technology of laser clad Fe-based coating for shield sealing runway repair [J]. Heat Treatment of Metals, 2022, 47(1): 202-211.
[13]	Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun. Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer [J]. Heat Treatment of Metals, 2022, 47(1): 276-280.
[14]	Ding Xuan, Gan Yurong, Jiang Aijuan, Li Hui, Yang Mingqiu. Influence of aging treatment on microstructure and properties of 7A55 aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 120-123.
[15]	Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li. Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(9): 223-228.