Effect of heat treatment process on microstructure and properties of KD sucker rod steel

doi:10.13251/j.issn.0254-6051.2021.01.005

Abstract

Abstract: Mechanical properties and microstructure of KD grade experimental steel used for sucker rod,after three different heat treatment processes,were studied by means of mechanical properties test,OM,SEM and TEM.The results show that the comprehensive mechanical properties of the material are the best when tempering temperature starts from room temperature.The impact property of the material obtained is worst when tempering temperature starts from 500 ℃,which is due to the uneven distribution of M+A islands in granular bainite with different shapes,and the majority is large blocks with sharp corners,which results in stress concentration.The second phase precipitates make the material have higher strength.

Key words: heat treatment, mechanical properties, microstructure, M+A islands

CLC Number:

TG142.41

Sun Xiaoran, Zheng Wenyue. Effect of heat treatment process on microstructure and properties of KD sucker rod steel[J]. Heat Treatment of Metals, 2021, 46(1): 28-31.

References

[1] 罗怀晓,张剑,齐丽娜.20CrMo 钢石油钻杆受力分析与热处理工艺研究[J].热加工工艺,2017,46(20):211-213.
Luo Huaixiao,Zhang Jian,Qi Lina.Study on heat treatment process and force analysis for oil drill pipes of 20CrMo[J].Hot Working Technology,2017,46(20):211-213.
[2] 肖雯雯,徐艳艳,李芳,等.某HL级35CrMo抽油杆断裂原因分析[J].腐蚀与防护,2019,40(8):614-618.
Xiao Wenwen,Xu Yanyan,Li Fang,et al.Analysis of fracture reasons for an HL grade 35CrMo sucker rod[J].Corrosion and Protection,2019,40(8):614-618.
[3] 笪光杰,杨忠民,李立新,等.Si-Mn-Mo 系低碳贝氏体钢的连续冷却转变曲线及组织特征[J].金属热处理,2019,44(2):16-24.
Da Guangjie,Yang Zhongmin,Li Lixin,et al.Continuous cooling transformation curves and microstructure of Si-Mn-Mo low carbon bainitic steel[J].Hot Working Technology,2019,44(2):16-24.
[4] 徐美玲,程巨强,刘志学.35SiMnMo截齿钢正火回火热处理工艺的研究[J].热加工工艺,2012,41(10):193-196.
Xu Meiling,Cheng Juqiang,Liu zhixue.Research on normalizing tempering heat treatment for 35SiMnMo pick steel[J].Hot Working Technology,2012,41(10):193-196.
[5] 关玉佐,王晓华.贝氏体抽油杆钢性能的研究[J].钢铁,2003,38(6):54-58.
Guan Yuzuo Wang Xiaohua.Study of performance of bainitice steel for oil-sucker rods[J].Iron And Steel,2003,38(6):54-58.
[6] 王权,武鹏祥,孙婷婷.回火工艺对超低碳微合金钢组织和性能的影响[J].金属热处理,2017,42(4):91-94.
Wang Quan,Wu Pengxiang,Sun Tingting.Effects of quenching and tempering on microstructure and mechanical properties of low-carbon microalloyed steel[J].Heat Treatment of Metals,2017,42(4):91-94.
[7] 苏磊,刘海红.热处理工艺对 35CrMo钢组织及性能的影响[J].金属热处理,2016,41(6):73-78.
Su Lei,Liu Haihong.Influence of heat treatment on microstructure and mechanical properties of 35CrMo steel[J].Heat Treatment of Metals,2016,41(6):73-78.
[8] 侯敬超,计云萍,靳晓燕,等.20MnCrNi2Mo 钢贝氏体回火转变[J].金属热处理,2015,40(6):31-33.
Hou Jingchao,Ji Yunping,Jin Xiaoyan,et al.Bainite tempering transformation of 20MnCrNi2Mo steel[J].Heat Treatment of Metals,2015,40(6):31-33.
[9] 于庆波.M/A 岛对粒状贝氏体钢冲击韧性的影响[J].热加工工艺,2012,41(24):41-42.
Yu Qingbo.Influence of M/A island on impact toughness of granular bainite steel[J].Hot Working Technology,2012,41(24):41-42.
[10] 赫建成,金天报,赵二军.工程机械用 42CrMo 钢环件热处理后的组织与性能[J].金属热处理,2018,43(12):205-210.
He Jiancheng,Jin Tianbao,Zhao Erjun.Microstructure and properties of 42CrMo steel ring for construction machinery after heat treatment[J].Heat Treatment of Metals,2018,43(12):205-210.

[1]	Wang Yudai, Liu Yang, Zhu Yanyan, Tian Xiangjun, Cheng Xu, Ran Xianzhe, Qian Tingting. Effect of heat treatment on microstructure homogeneity and tensile properties of hybrid fabricated AerMet100 ultra-high strength steel [J]. Heat Treatment of Metals, 2022, 47(4): 1-9.
[2]	Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin. Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy [J]. Heat Treatment of Metals, 2022, 47(4): 10-16.
[3]	Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu. Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel [J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
[4]	Qi Xiaoliang, Li Yan, Ding Wei, Zhao Zengwu. Effect of original microstructure of medium manganese TRIP steel containing Al on microstructure and mechanical properties after intercritical annealing [J]. Heat Treatment of Metals, 2022, 47(4): 24-29.
[5]	Chen Baoan, Zhang Jingyuan, Zhu Zhixiang, Han Yu, Pan Xuedong, Zhang Lei, Chen Suhong. Effect of chemical composition on microstructure and properties of high strength Al-Mg-Si alloy [J]. Heat Treatment of Metals, 2022, 47(4): 30-38.
[6]	Chen Dongjun, Li Guangyang, Liu Gang. Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy [J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
[7]	Chen Liansheng, Zhang Luyou, Tian Yaqiang, Yang Zixuan, Li Hongbin, Pan Hongbo, Wei Yingli. CCT curves and microstructure and properties of low-carbon high strength marine steel [J]. Heat Treatment of Metals, 2022, 47(4): 63-68.
[8]	Jia Changyuan, Huo Yuanming, He Tao, Huo Cunlong, Liu Keran. High temperature tensile deformation behavior and microstructure evolution law of 40CrNiMo steel [J]. Heat Treatment of Metals, 2022, 47(4): 69-74.
[9]	Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui. Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel [J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
[10]	Liu Liyan, Bi Wenzhen, Wei Xicheng. Effect of Mn element on microstructure evolution of galvanized coating of hot stamping steel [J]. Heat Treatment of Metals, 2022, 47(4): 93-99.
[11]	Luo Zaibin, Fan Zize, Peng Zhen. Research progress of light-weight high-entropy alloys [J]. Heat Treatment of Metals, 2022, 47(4): 100-107.
[12]	Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong. Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel [J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
[13]	Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng. Effect of magnetic field pre-annealing on microstructure and texture of CGO steel [J]. Heat Treatment of Metals, 2022, 47(4): 128-132.
[14]	Li Li, Zeng Yan, Wu Xiaochun. Heat treatment process optimization for 4Cr5Mo2VCo steel [J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
[15]	Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang. Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing [J]. Heat Treatment of Metals, 2022, 47(4): 141-145.