Effect of low-temperature stress relief annealing on corrosion resistance of 316L stainless steel cold stamping corrugated plate for plate heat exchanger

doi:10.13251/j.issn.0254-6051.2021.07.026

Abstract

Abstract: Effect of stress relief annealing on corrosion resistance of the 316L stainless steel cold stamping corrugated plate for plate heat exchanger was studied by means of martensite content detection, XRD phase analysis and electrochemical test.The results show that with the increase of stress relief annealing temperature, the continuous transformation from residual austenite to martensite is caused by the cooperative deformation of austenite and strain induced martensite in the 316L stainless steel cold stamping corrugated plate, resulting that the content of martensite is increased and the martensite transforms to tempered martensite, the self-corrosion potential becomes more negative and the corrosion resistance becomes worse.

Key words: 316L stainless steel, plate heat exchanger, stress relief annealing, martensite content

CLC Number:

TH49
TG115

Shi Wei, E Xin, Wang Yanlong , Liu Limei, Yong Hongtuanhua, Zhang Ping. Effect of low-temperature stress relief annealing on corrosion resistance of 316L stainless steel cold stamping corrugated plate for plate heat exchanger[J]. Heat Treatment of Metals, 2021, 46(7): 140-143.

References

[1] 刘志平, 王莉, 张伟. ASTM SMO254板式换热器腐蚀的原因[J]. 腐蚀与防护, 2016, 37(11): 932-935.
Liu Zhiping, Wang Li, Zhang Wei. Corrosion reasons of the plate heat exchanger of ASTM SMO245stainless steel[J]. Corrosion and Protection, 2016, 37(11): 932-935.
[2] 黄超, 周振, 卢奇, 等. 板式换热器板片常用材料的应用[J]. 中国金属通报, 2020(5): 297-298.
Huang Chao, Zhou Zhen, Lu Qi, et al. Application of common materials for plate heat exchanger[J]. China Metal Bulletin, 2020(5): 297-298.
[3] Yang Ke, Wang Qiuyu, Qu Yang, et al. Microstructure and corrosion resistance of arc additive manufactured 316L stainless steel[J]. Journal of Wuhan University of Technology(Materials Science), 2020, 35(5): 930-936.
[4] 刘志江. 低温多效蒸馏海水淡化设备选材分析[J]. 热力发电, 2012, 41(12): 65-67.
Liu Zhijiang. Material selection for low temperature multiple-effect distillation seawater desalination equipments[J]. Thermal Power Generation, 2012, 41(12): 65-67.
[5] 王军, 靳彤, 马一鸣, 等. 高残余应力下2507双相不锈钢应力腐蚀开裂行为[J]. 压力容器, 2020, 37(3): 50-55, 78.
Wang Jun, Jin Tong, Ma Yiming, et al. Stress corrosion cracking behavior of 2507 duplex stainless steel under high residual stress[J]. Pressure Vessel Technology, 2020, 37(3): 50-55, 78.
[6] 郭舒, 韩恩厚, 王海涛, 等. 核电站316L不锈钢弯头应力腐蚀行为的寿命预测[J]. 金属学报, 2017, 53(4): 455-464.
Guo Shu, Han Enhou, Wang Haitao, et al. Life prediction for stress corrosion behavior of 316L stainless steel elbow of nuclear power plant[J]. Acta Metallurgica Sinica, 2017, 53(4): 455-464.
[7] 盛琳. 可拆式板式换热器的腐蚀分析及防护途径[J]. 全面腐蚀控制, 2019, 33(8): 92-93.
Sheng Lin. Corrosion analysis and protection of detachable plate heat exchanger[J]. Total Corrosion Control, 2019, 33(8): 92-93.
[8] 祁玉红, 俞树荣, 李治国. 板式换热器的应力腐蚀及防护[J]. 石油化工腐蚀与防护, 2007, 24(3): 40-42.
Qi Yuhong, Yu Shurong, Li Zhiguo. Stress corrosion and protection of welded plate heat exchanger[J]. Corrosion and Protection in Petrochemical Industry, 2007, 24(3): 40-42.
[9] 孙海生, 常春梅, 姬平如. 板式换热器冷冲压波纹板片热处理工艺研究[J]. 压力容器, 2015, 32(11): 75-79.
Sun Haisheng, Chang Chunmei, Ji Pingru. Heat treatment process research on plate heat exchanger cold stamped corrugated plate[J]. Pressure Vessel Technology, 2015, 32(11): 75-79.
[10] 李循迹, 陈博, 金伟, 等. 热处理对复合板焊接接头中316L不锈钢焊缝组织及耐蚀性的影响[J]. 腐蚀与防护, 2018, 39(4): 298-301.
Li Xunji, Chen Bo, Jin Wei, et al. Influences of heat treatment on microstructure and corrosion resistance of 316L stainless steel weld in welded joint of composite plate[J]. Corrosion and Protection, 2018, 39(4): 298-301.
[11] 罗宏, 龚敏. 奥氏体不锈钢的晶间腐蚀[J]. 腐蚀科学与防护技术, 2006, 17(5): 357-360.
Luo Hong, Gong Min. On intergranular corrosion of austenitic stainless steel[J]. Corrosion Science and Protection Technology, 2006, 17(5): 357-360.
[12] 桂莹莹, 明瑞贞, 龙元宁, 等. 低温退火对冷轧奥氏体不锈钢带硬度和组织的影响[J]. 金属热处理, 2010, 35(8): 15-17.
Gui Yingying, Ming Ruizhen, Long Yuanning, et al. Effect of low-temperature annealing on hardness and microstructure of cold rolled austenitic stainless steel strip[J]. Heat Treatment of Metals, 2010, 35(8): 15-17.
[13] 许淳淳, 张新生, 胡钢. AISI304不锈钢在冷加工过程中的微观组织变化[J]. 北京化工大学学报, 2002, 29(6): 27-31.
Xu Chunchun, Zhang Xinsheng, Hu Gang. Microstructure change of AISI304 stainless steel in the course of cold working[J]. Journal of Beijing University of Chemical Technology, 2002, 29(6): 27-31.
[14] 范春华, 李雪莹, 尹衍升, 等. 回火温度对AM355不锈钢组织及腐蚀行为的影响[J]. 金属热处理, 2018, 43(5): 90-95.
Fan Chunhua, Li Xueying, Yin Yansheng, et al. Effect of tempering temperature on microstructure and corrosion behavior of AM355 stainless steel[J]. Heat Treatment of Metals, 2018, 43(5): 90-95.
[15] 炊鹏飞, 董洪峰, 景然, 等. 退火处理对表面纳米化316L不锈钢组织及耐腐蚀性能的影响[J]. 材料热处理学报, 2019, 40(12): 144-149.
Chui Pengfei, Dong Hongfeng, Jing Ran, et al. Effect of annealing treatment on microstructure and corrosion resistance of surface nanocrystallization 316L stainless steel[J]. Transactions of Materials and Heat Treatment, 2019, 40(12): 144-149.