Fault mode and fault tree analysis of WZC double chamber vacuum furnace system

doi:10.13251/j.issn.0254-6051.2021.10.045

Abstract

Abstract: Fault mode and fault tree analysis of the WZC double chamber vacuum oil quenching gas cooling furnace system were carried out in the ways of subsystems and subcomponents. The failure modes and fault tree models of the furnace liner, vacuum system, mechanism and electronic control system were established respectively, the corresponding basic events were summarized, and the minimum cut set of each fault tree was obtained by using Fusel method.

Key words: WZC double chamber vacuum furnace system, fault mode, fault tree analysis

CLC Number:

TG156.3

Li Yong, Zhou Xinyu. Fault mode and fault tree analysis of WZC double chamber vacuum furnace system[J]. Heat Treatment of Metals, 2021, 46(10): 248-251.

References

[1]王滨盐. 热处理技术的现状与发展方向[J]. 国外机车车辆工艺, 2015(5): 1-7.
Wang Binyan. Current situation and development direction of heat treatment technology[J]. Foreign Rolling Stock Technology, 2015(5): 1-7.
[2]李红卫, 杨东升, 孙一兰, 等. 智能故障诊断技术研究综述与展望[J]. 计算机工程与设计, 2013, 34(2): 632-637.
Li Hongwei, Yang Dongsheng, Sun Yilan, et al. Review and prospect of intelligent fault diagnosis technology[J]. Computer Engineering and Design, 2013, 34(2): 632-637.
[3]刘观良, 赵万能, 仝麦智. 基于人工智能的网络故障诊断研究综述[J]. 电脑编程技巧与维护, 2013(10): 101-102.
Liu Guanliang, Zhao Wanneng, Tong Maizhi. Review of network fault diagnosis based on artificial intelligence[J]. Computer Programming Skills and Maintenance, 2013(10): 101-102.
[4]董玉华, 高惠临, 周敬恩, 等. 长输管线失效状况模糊故障树分析方法[J]. 石油学报, 2002, 23(4): 85-89.
Dong Yuhua, Gao Huilin, Zhou Jing'en, et al. Fuzzy fault tree analysis method for long distance pipeline failure[J]. Acta Petrologica Sinica, 2002, 23(4): 85-89.
[5]陈朝阳, 张代胜, 任佩红, 等. 基于故障树分析法的汽车故障诊断专家系统[J]. 农业机械学报, 2003, 34(5): 130-133.
Chen Chaoyang, Zhang Daisheng, Ren Peihong, et al. Automobile fault diagnosis expert system based on fault tree analysis[J]. Acta Agricultrual Machinery, 2003, 34(5): 130-133.
[6]Sullivan K J, Dugan J B, Coppit D. The Galileo fault tree analysis tools[C]//Fault-Tolerant Computing, 1999. Digest of Papers. Twenty-Ninth Annual International Symposium on IEEE, 1999: 232-235.
[7]文光明. 大型真空淬火炉结构特点与故障分析[J]. 装备维修技术, 2010(1): 26-29.
Wen Guangming. Structural characteristics and fault analysis of large vacuum quenching furnace[J]. Equipment Maintenance Technology, 2010(1): 26-29.
[8]阎承沛. 真空热处理工艺与设备设计[M]. 北京: 机械工业出版社, 1998.
[9]胡剑锋, 尹中秋, 毛喆, 等. 真空淬火常见故障[J]. 热处理技术与设备, 2020, 41(3): 64-67.
Hu Jianfeng, Yin Zhongqiu, Mao Zhe, et al. Common faults of vacuum quenching[J]. Heat Treatment Technology and Equipment, 2020, 41(3): 64-67.
[10]吴建设. 真空炉真空系统的故障分析[J]. 材料工程, 1997(4): 25-27.
Wu Jianshe. Fault analysis of vacuum system of vacuum furnace[J]. Materials Engineering, 1997(4): 25-27.

[1]	Chen Qiang, Chen Linfang, Yang Minghua. High temperature carburizing process of 18CrNiMo7-6 steel in controlled atmosphere [J]. Heat Treatment of Metals, 2022, 47(4): 231-239.
[2]	Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei. Effect of quenching temperature on microstructure and properties of a low cobalt secondary hardening steel [J]. Heat Treatment of Metals, 2022, 47(3): 92-96.
[3]	Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo. Effects of Si content and quenching temperature on microstructure and properties of Q&P steel [J]. Heat Treatment of Metals, 2022, 47(3): 130-135.
[4]	Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu. Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni [J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
[5]	Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun. Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer [J]. Heat Treatment of Metals, 2022, 47(1): 276-280.
[6]	Jiao Yongxiang, Deng Dewei, Sun Qi, Li Tianshu, Yang Shuhua, Zhang Yong, Ma Yushan. Influence of process parameter on laser quenching effect of 42CrMo steel [J]. Heat Treatment of Metals, 2021, 46(11): 90-96.
[7]	Xia Xiaoyu, Xiao Jinya, Wei Hanwei, Wang Shen. Microstructure transformation of door impact beam on induction hardening [J]. Heat Treatment of Metals, 2021, 46(10): 212-217.
[8]	Chen Xuyang, Lu Wenlin, Du Chunhui, Wang Tong. Numerical simulation of temperature field of parts with large aspect ratio during high pressure gas quenching process [J]. Heat Treatment of Metals, 2021, 46(10): 242-247.
[9]	Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin. Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel [J]. Heat Treatment of Metals, 2021, 46(9): 133-137.
[10]	Xu Qihao,Yang Lilin, Xia Ming, Qin Chen, Geng Zhenyue, Jiang Yajun, Zhao Liping. Failure analysis of 38CrMoAlA steel driveshaft [J]. Heat Treatment of Metals, 2021, 46(9): 268-272.
[11]	Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian. Numerical simulation and experimental verification of induction hardening of wind power inner gear ring [J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
[12]	He Li. Vacuum heat treatment of 0Cr17Ni4Cu4Nb stainless steel base [J]. Heat Treatment of Metals, 2021, 46(8): 189-191.
[13]	Wang Cheng, Guo Hongli, Sun Jian, Li Defa. Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel [J]. Heat Treatment of Metals, 2021, 46(6): 111-115.
[14]	Wang Lei, Ma Lu, Yang Bo, Zhang Kai, Song Yang, Wang Ye. Cause analysis of abnormal microstructure of nodular cast iron parts after high frequency induction quenching [J]. Heat Treatment of Metals, 2021, 46(6): 231-235.
[15]	Tan Xiaomeng, Tian Feng, Qiao Xin, Guo Xin'ai. Cracking failure analysis on a high speed shaft of belt conveyor reducer [J]. Heat Treatment of Metals, 2021, 46(6): 253-255.