[1]庄景云, 杜金辉, 邓 群, 等. 变形高温合金GH4169[M]. 北京: 冶金工业出版社, 2006. [2]中国航空材料手册编委会. 中国航空材料手册: 第二卷变形高温合金铸造高温合金[M]. 北京: 中国标准出版社, 2002. [3]孙艳容, 王 杰, 杨 锦, 等. 热处理制度对IN718变形合金组织和性能的影响[J]. 金属热处理, 2018, 43(12): 152-159. Sun Yanrong, Wang Jie, Yang Jin, et al. Effect of heat treatment on microstructure and mechanical properties of IN718 deformed alloy[J]. Heat Treatment of Metals, 2018, 43(12): 152-159. [4]Whitmore L, Ahmadi M R, Stockinger M, et al. Microstructural investigation of thermally aged nickel-based superalloy 718Plus[J]. Materials Science and Engineering A, 2014, 594: 253-259. [5]李小波, 罗德福, 韩瑞鹏, 等. 渗氮温度对Inconel 718合金磨损和腐蚀性能的影响[J]. 金属热处理, 2017, 42(2): 170-175. Li Xiaobo, Luo Defu, Han Ruipeng, et al. Effect of nitriding temperature on the wear and corrosion behavior of the Inconel 718 alloy[J]. Heat Treatment of Metals, 2017, 42(2): 170-175. [6]孙跃军, 康俊国, 宫声凯. Al、Ti、Ta对镍基单晶高温合金组织和性能的影响[J]. 特种铸造及有色合金, 2008(9): 660-662. Sun Yuejun, Tang Junguo, Gong Shengkai. Effects of Al, Ti and Ta on microstructure and properties of Ni-based single crystal superally[J]. Special Casting and Nonferrous Alloys, 2008(9): 660-662. [7]刘丽荣, 金 涛, 陈海军, 等. Ti/Al比对镍基单晶高温合金组织和持久性能的影响[J]. 稀有金属材料与工程, 2009, 38(4): 612-616. Liu Lirong, Jin Tao, Chen Haijun, et al. Effect of Ti/Al ratio on the microstructure and stress rupture property in a Ni-base single crystal superalloy[J]. Rare Metal Materials and Engineering, 2009, 38(4): 612-616. [8]Chi C, Yu H, Dong J, et al. Strengthening effect of Cu-rich phase precipitation in 18Cr9Ni3CuNbN austenitic heat-resisting steel[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(2): 141-147. [9]李兵兵, 陈海涛, 郎宇平, 等. 含铜超级奥氏体不锈钢的固溶行为[J]. 金属热处理, 2020, 45(11): 68-72. Li Bingbing, Chen Haitao, Lang Yuping, et al. Solution behavior of copper-containing super anstenitic stainless steel[J]. Heat Treatment of Metals, 2020, 45(11): 68-72. [10]Sampath D, Akid R, Morana R. Estimation of crack initiation stress and local fracture toughness of Ni-alloys 945X (UNS N09946) and 718 (UNS N07718) under hydrogen environment via fracture surface topography analysis[J]. Engineering Fracture Mechanics, 2018, 191: 324-343. [11]Demetriou V, Robson J D, Preuss M, et al. Effect of hydrogen on the mechanical properties of alloy 945X (UNS N09945) and influence of microstructural features[J]. Materials Science and Engineering A, 2017, 684: 423-434. [12]Manikandan S G K, Sivakumar D, Prasad R K, et al. Laves phase in alloy 718 fusion zone-microscopic and calorimetric studies[J]. Materials Characterization, 2015, 100: 192-206. [13]Anderson M, Thielin A L, Bridier F, et al. δ Phase precipitation in Inconel 718 and associated mechanical properties[J]. Materials Science and Engineering A, 2017, 679: 48-55. [14]Chen M S, Guan Q W, Hong B, et al. Precipitation and dissolution behaviors of δ phase inside a deformed nickel-based superalloy during annealing treatment[J]. Applied Physics A, 2019, 125: 447-461. [15]李玉清, 刘锦岩. 高温合金晶界间隙相[M]. 北京: 冶金工业出版社, 1990. |