Effect of solution treatment on austenite grain growth of low expansion GH2909 superalloy

doi:10.13251/j.issn.0254-6051.2022.09.015

Abstract

Abstract: In order to analyze the effect of solution treatment temperature and time on austenite grain growth in GH2909 superalloy and obtain the grain growth law, the GH2909 superalloy was solution treated at different temperatures (1000-1080 ℃) for different time (1-4 h). The average grain size of austenite in GH2909 alloy after different solution treatment processes was measured, and the austenite grain growth model during solution treatment was established. The results show that the austenite grain size of GH2909 alloy increases gradually with the increase of solution treatment temperature and time, and the Laves phase in the structure gradually redissolves. When the solution treatment temperature is lower than 1020 ℃, the GH2909 alloy has good ability to resist austenite grain coarsening, which can effectively guide the grain size control in the forging process of GH2909 alloy.

Key words: low expansion GH2909 superalloy, austenite, grain growth, solution treatment

CLC Number:

TG156.1

Chen Qi, Zhou Yang, Fu Jianhui. Effect of solution treatment on austenite grain growth of low expansion GH2909 superalloy[J]. Heat Treatment of Metals, 2022, 47(9): 87-91.

References

[1]赵新宇, 张绍雄. 热处理对GH909合金组织和性能的影响[J]. 材料工程, 2002, 30(S1): 42-45, 57.
Zhao Xinyu, Zhang Shaoxiong. Effects of heat treatments on microstructure and mechanical properties of superalloy GH909[J]. Journal of Materials Engineering, 2002, 30(S1): 42-45, 57.
[2]高玉奎, 赵宇新, 殷源发. 低膨胀高温合金GH909再结晶研究[J]. 金属热处理, 2005, 30(1): 77-79.
Gao Yukui, Zhao Yuxin, Yin Yuanfa. Study of recrystallization of low expansion superalloy GH909[J]. Heat Treatment of Metals, 2005, 30(1): 77-79.
[3]陈琼, 田世籓, 张绍维. 低膨胀高温合金GH907和GH909的铸态组织及其均匀化处理[J]. 航空材料学报, 1993(1): 13-21.
Chen Qiong, Tian Shifan, Zhang Shaowei. The cast-phases and homogenization treatments of the low-expansion superalloy GH907 and GH909[J]. Journal of Aeronautical Materials, 1993(1): 13-21.
[4]顾亚桃, 杨明华, 陈强, 等. 20Cr2Ni4A钢奥氏体晶粒长大规律与高温渗碳工艺[J]. 金属热处理, 2019, 44(2): 198-203.
Gu Yatao, Yang Minghua, Chen Qiang, et al. Austenitic grain growth law and high temperature carburizing process of 20Cr2Ni4Al steel[J]. Heat Treatment of Metals, 2019, 44(2): 198-203.
[5]刘豪, 张立文, 李飞, 等. 38CrMoAl钢的奥氏体晶粒长大行为[J]. 金属热处理, 2020, 45(8): 38-42.
Liu Hao, Zhang Liwen, Li Fei, et al. Austenitic grain growth behavior of 38CrMoAl steel[J]. Heat Treatment of Metals, 2020, 45(8): 38-42.
[6]党淑娥, 宿展宁, 刘志龙, 等. 30Cr2Ni4MoV钢铸态加热过程中奥氏体晶粒的长大行为[J]. 材料研究学报, 2014, 28(9): 675-681.
Dang Shue, Su Zhanning, Liu Zhilong, et al. Austenite grain growth behavior during heating process of as-cast 30Cr2Ni4MoV steel[J]. Chinese Journal of Materials Research, 2014, 28(9): 675-681.
[7]李伟, 陈文琳, 吴跃, 等. 42CrMo钢加热时奥氏体晶粒长大演化规律[J]. 材料热处理学报, 2015, 36(1): 104-108.
Li Wei, Chen Wenlin, Wu Yue, et al. Austenite grain growth behavior of 42CrMo steel during heating[J]. Transactions of Materials and Heat Treatment, 2015, 36(1): 104-108.
[8]王葛, 王东冉, 刘利刚, 等. Cr8钢奥氏体晶粒长大规律[J]. 材料热处理学报, 2014, 35(2): 94-99.
Wang Ge, Wang Dongran, Liu Ligang, et al. Austenite grain growth behavior of Cr8 steel[J]. Transactions of Materials and Heat Treatment, 2014, 35(2): 94-99.
[9]胡海江, 徐光, 张玉龙, 等. 先进贝氏体钢奥氏体晶粒长大行为的动态观察[J]. 材料热处理学报, 2014, 35(1): 83-87.
Hu Haijiang, Xu Guang, Zhang Yulong, et al. Dynamic observation of austenite grain growth behavior of an advanced bainite steel[J]. Transactions of Materials and Heat Treatment, 2014, 35(1): 83-87.
[10]李建凯, 厉勇, 王春旭, 等. A315钢奥氏体晶粒长大的数学模型[J]. 金属热处理, 2016, 41(4): 183-189.
Li Jiankai, Li Yong, Wang Chunxu, et al. Mathematical model of austenite grain growth for A315 steel[J]. Heat Treatment of Metals, 2016, 41(4): 183-189.
[11]孔永华, 胡华斌, 李东方, 等. 热连轧GH4169合金晶粒的长大规律[J]. 钢铁研究学报, 2011, 23(9): 29-32.
Kong Yonghua, Hu Huabin, Li Dongfang, et al. Grain growth of hot continuous rolling GH4169 superalloy[J]. Journal of Iron and Steel Research, 2011, 23(9): 29-32.

[1]	Wang Zhiwen, Yang Rongdong, Huang Yuanchun, Li Hui. Effect of aging treatment on microstructure and mechanical properties of extruded 2195 Al-Li alloy [J]. Heat Treatment of Metals, 2022, 47(9): 6-11.
[2]	Su Zhangzhu, Wu Run, Li Zhao, Wu Teng, Qin Jinzhu. Effect of partitioning time on microstructure and properties of low carbon hot rolled F-Q&P steel [J]. Heat Treatment of Metals, 2022, 47(9): 27-30.
[3]	Cheng Qiao, Wang Jun, Xu Liang, Tian Jianming, Chen Zhongyi, Ma Yonglin. Effect of pulsed magnetic field on microstructure and mechanical properties of 7A04 aluminum alloy under solution treatment [J]. Heat Treatment of Metals, 2022, 47(9): 60-64.
[4]	Ji Dejing, Yang Weiyu, Bai Yaqiong. Optimization of quenching process of high strength and toughness Q690D steel for construction machines [J]. Heat Treatment of Metals, 2022, 47(9): 108-112.
[5]	Zhang Yucheng, Jia Haomei. Effect of solution treatment on microstructure and properties of Incoloy825 alloy pipe [J]. Heat Treatment of Metals, 2022, 47(9): 134-139.
[6]	Tian Wei, Pan Wei, Zhong Qingyuan. Control of δ-ferrite content and austenite grain size in 0Cr16Ni5Mo martensite stainless steel [J]. Heat Treatment of Metals, 2022, 47(9): 194-201.
[7]	Yan Zhikun, Chen Haitao, Lang Yuping, Qu Huapeng, Feng Hanqiu, Liu Rongpei. Effect of Nb on microstructure and intergranular corrosion sensitivity of 00Cr21Ni6Mn9N stainless steel [J]. Heat Treatment of Metals, 2022, 47(9): 240-244.
[8]	Zhou Lina, Liu Ming, Gao Xiang, Wang Wenxue, Tong Rui. Effect of austenitizing process on microstructure of Cr14Mo4V high temperature bearing steel [J]. Heat Treatment of Metals, 2022, 47(8): 7-15.
[9]	Guo Wenyi, Jiao Haitao, Xie Xinxiang, Zhao Longzhi, Zhao Mingjuan, Hu Yong. Grain growth behavior and magnetic property evolution of non-oriented electrical steel during annealing [J]. Heat Treatment of Metals, 2022, 47(8): 123-128.
[10]	Li Huidong, Zhang Qinyi, Liu Wei, Sun Wei, Wu Dong. Effect of deep cryogenic treatment on microstructure and corrosion resistance of 440C martensitic stainless steel [J]. Heat Treatment of Metals, 2022, 47(8): 152-157.
[11]	Liu Lin, Xu Haiwei, Li Hongbin, Han Yun, Tian Yaqiang, Zheng Xiaoping, Chen Liansheng. Effect of intercritical continuous annealing temperature on microstructure and properties of Q&P980 steel [J]. Heat Treatment of Metals, 2022, 47(8): 177-181.
[12]	Wang Shaohua, Zhong Liwei, Ma Zhifeng. Effect of high-temperature short-time solution treatment on microstructure and properties of ultra-high strength Al-Zn-Mg-Cu alloy forging [J]. Heat Treatment of Metals, 2022, 47(7): 20-26.
[13]	Wang Sichao, Xu Haiwei, Xu Yong, Han Yun, Zheng Xiaoping, Li Hongbin, Tian Yaqiang, Chen Liansheng. Effect of cooling methods after ART annealing on work hardening behavior of 0.1C-7.2Mn steel [J]. Heat Treatment of Metals, 2022, 47(7): 58-62.
[14]	Wang Hua, Wang Zeyu, Song Jiaming, Qu Zonghong, Lai Yunjin, Liang Shujin. Effect of solution treatment on microstructure and properties of powder metallurgy GH4099 alloy [J]. Heat Treatment of Metals, 2022, 47(7): 86-91.
[15]	Fu Xibin, Meng Shaobo, Liu Wensheng, Zhang Ke, Li Zhaodong, Cao Yanguang, Zhang Xiaofeng, Yong Qilong. Effect of solution treatment on microstructure and mechanical properties of Fe-30Mn-10Al-1C low density steel [J]. Heat Treatment of Metals, 2022, 47(7): 114-119.