Influence of quenching temperature on microstructure and hardness of Fe-Cr-B-C alloy coating

doi:10.13251/j.issn.0254-6051.2022.10.038

Abstract

Abstract: Effect of quenching temperature (850, 950 and 1050 ℃) on microstructure of Fe-Cr-B-C alloy coating prepared by plasma overlaying was studied by means of OM, SEM and XRD, and the hardness was tested by using microhardness tester. The results indicate that the as-plasma overlaid Fe-Cr-B-C alloy coating comprises dendritic matrix and interdendritic boron carbide distributed in the form of continuous network. After quenching at 1050 ℃, the boron carbide in the Fe-Cr-B-C alloy coating dissolves and spheroidizes, the hardness is up to 64.3 HRC, and the comprehensive properties is the best.

Key words: Fe-Cr-B-C alloy coating, quenching, microstructure, boron carbide

CLC Number:

TG156.3

Wu Xianji, Song Yuanyuan, Yang Zhirong, Yan Desheng, Jiang Haichang, Hu Xiaofeng. Influence of quenching temperature on microstructure and hardness of Fe-Cr-B-C alloy coating[J]. Heat Treatment of Metals, 2022, 47(10): 224-227.

References

[1]牟楠, 卢静, 周海铭, 等. 共晶Fe-Cr-B-C合金的快冷组织与性能[J]. 铸造, 2017, 66(10): 1053-1056.
Mu Nan, Lu Jing, Zhou Haiming, et al. Microstructure and properties of eutectic Fe-Cr-B-C alloy prepared by rapid cooling[J]. Foundry, 2017, 66(10): 1053-1056.
[2]Chen Xiang, Li Yanxiang. Effect of heat treatment on microstructure and mechanical properties of high boron white cast iron[J]. Materials Science and Engineering A, 2010, 528: 770-775.
[3]王永田, 魏啸天, 赵炜璠, 等, 高硼含量的铁基非晶复合涂层的制备与性能研究[J]. 材料导报, 2021, 35(S1): 425-428.
Wang Yongtian, Wei Xiaotian, Zhao Yifan, et al. Study on preparation and property of the Fe-based amorphous composite coating with high boron content[J]. Materials Reports, 2021, 35(S1): 425-428.
[4]张坚, 黄道思, 赵龙志, 等. 稀土Ce对激光熔覆高硼贝氏体涂层性能的影响[J]. 金属热处理, 2021, 46(1): 133-137.
Zhang Jian, Huang Daosi, Zhao Longzhi, et al. Effect of rare earth Ce on properties of high boron bainite coating prepared by laser cladding[J]. Heat Treatment of Metals, 2021, 46(1): 133-137.
[5]郝石坚. 高铬耐磨铸铁[M]. 北京: 煤炭工业出版社, 1993: 203-204.
[6]王智慧, 万国力, 贺定勇, 等. Fe-Cr-B-C堆焊合金的组织与耐磨性[J]. 材料工程, 2014(9): 57-62.
Wang Zhihui, Wan Guoli, He Dingyong, et al. Microstructures and wear resistance of Fe-Cr-B-C hardfacing alloys[J]. Journal of Materials Engineering, 2014(9): 57-62.
[7]Riki Hendra Purba, Kazumichi Shimizu, Kenta Kusumoto, et al. Effect of born addition on three-body abrasive wear characteristics of high chromium based multi-component white cast iron[J]. Materials Chemistry and Physics, 2022, 275: 125232.
[8]Bedolla-Jacuinde A, Guerra F V, Guerrero-Pastran A J, et al. Microstructural effect and wear performance of high chromium white cast iron modified with high boron contents[J]. Wear, 2021, 476: 203675.

[1]	Gao Xing, Zhang Ning, Ding Yan, Jiang Bo. Effect of heat treatment time on microstructure and mechanical properties of TC4 titanium alloy fabricated by selective laser melting [J]. Heat Treatment of Metals, 2022, 47(9): 12-17.
[2]	Xia Pengzhao, Xu Ying, Cai Yanqing, Zhao Sitan, Lou Bingjie. Effect of microwave sintering process on microstructure and properties of Ti-Mg composites [J]. Heat Treatment of Metals, 2022, 47(9): 18-26.
[3]	Lin Lingfeng, Yuan Gecheng, Yang Lian, Ding Canpei. Effect of average pass reduction on microstructure of asynchronous rolled-solution treated 6016 aluminum alloy sheet [J]. Heat Treatment of Metals, 2022, 47(9): 36-40.
[4]	Wang Lu, Wang Feng, Zhang Mingwei, Liu Rui, Fu Zhengyuan, Liu Jingshun. Effect of annealing process on microstructure and corrosion resistance of Ti-4Al-2V alloy [J]. Heat Treatment of Metals, 2022, 47(9): 41-46.
[5]	Pan Ran, Liu Baosheng, Zeng Yuansong, Qu Haitao, Wang Dong, Mu Yanhong. Effect of cryogenic treatment on microstructure and mechanical properties of 15%SiC_p/2009 aluminum matrix composite [J]. Heat Treatment of Metals, 2022, 47(9): 65-70.
[6]	Zhang Haoze, Wang Junsheng, Gong Penghui, Zhan Haiyi, Wang Kai. Effect of heat treatment on microstructure and mechanical properties of TC4 alloy plate directly rolled by EB ingot [J]. Heat Treatment of Metals, 2022, 47(9): 71-78.
[7]	Zhong Liwei, Feng Zhaohui, Gao Wenli, Chen Junzhou, Lu Zheng. Effects of multi-axial forging and T852 heat treatment on microstructure and mechanical properties of Al-Cu-Li alloy [J]. Heat Treatment of Metals, 2022, 47(9): 79-86.
[8]	Ji Dejing, Yang Weiyu, Bai Yaqiong. Optimization of quenching process of high strength and toughness Q690D steel for construction machines [J]. Heat Treatment of Metals, 2022, 47(9): 108-112.
[9]	Wen Fangming, Hao Xiaobo, Cao Heng, Zhang Qiang, Li Bobo, Liu Yinqi. Effect of heat treatment process on microstructure and mechanical properties of N06600 alloy hot rolled plate [J]. Heat Treatment of Metals, 2022, 47(9): 113-118.
[10]	Ai Bingquan, Kuang Shuang, Tian Xiugang, Yang Feng, Wang Yuhui, Lu Zhiqiang, Wang Zhao, Hao Lei. Effect of soaking temperature on microstructure and properties of 980 MPa grade high strength steel with different chemical composition [J]. Heat Treatment of Metals, 2022, 47(9): 119-124.
[11]	Wang Shikai, Wang Rui, Kang Yan, Yu Zhiqiang, Yan Zhijie. Effect of quenching temperature on microstructure and properties of Cr5MoVNi steel [J]. Heat Treatment of Metals, 2022, 47(9): 125-129.
[12]	Xiong Weiliang, Liang Wen, Wu Teng, Liang Liang, Wu Haohong. Effect of controlled cooling process on microstructure and mechanical properties of hot-rolled dual phase steel [J]. Heat Treatment of Metals, 2022, 47(9): 130-133.
[13]	Fan Zhao, Cheng Zonghui, Zhang Zhiqiang. Effect of laser heat input on microstructure and mechanical properties of 1Cr17Ni2 stainless steel repaired by laser additive [J]. Heat Treatment of Metals, 2022, 47(9): 140-145.
[14]	Wang Ruimin, Liu Man, Zhou Jianhua, Zhang Qi, Su Xue, Xu Guang. Continuous cooling transformation curve of R350HT rail steel [J]. Heat Treatment of Metals, 2022, 47(9): 153-157.
[15]	Li Jing, Liu Chen, Yang Yuehui, Yuan Shaoqiang, Ai Chenguang. Continuous cooling transformation behavior of high-strength Q690D heavy steel plate [J]. Heat Treatment of Metals, 2022, 47(9): 171-174.