Interpretation of GB/T 38819—2020 Technical requirements and assessment of green heat treatment

doi:10.13251/j.issn.0254-6051.2023.04.049

Abstract

Abstract: In view of the characteristics of heat treatment enterprises, the requirements of the standard for heat treatment enterprises in basic requirements, heat treatment plant, heat treatment equipment, heat treatment process materials, heat treatment process, management system, environmental emissions and other aspects specified in the GB/T 38819-2020 were interpreted carefully, and the evaluation method of green heat treatment was explained.

Key words: green heat treatment, technical requirements, evaluation, standard

CLC Number:

TG155

Dong Xiaohong, Xu Yueming, Chang Yumin, Li Qiao, Wang Guangsheng. Interpretation of GB/T 38819—2020 Technical requirements and assessment of green heat treatment[J]. Heat Treatment of Metals, 2023, 48(4): 307-315.

References

[1]全国热处理标准化技术委员会. 绿色热处理技术要求及评价: GB/T 38819—2020[S]. 北京. 中国国家标准化管理委员会, 2020.
[2]中国热处理行业协会. 中国热处理行业“十四五”发展规划规划纲要[J]. 热处理技术与装备, 2020, 45(5): 66-76.
Chinaheat treatment industry association. outline of the 14th five-year plan for the development of China's heat treatment industry[J]. Heat Treatment Technology and Equipment, 2020, 45(5): 66-76.
[3]中国热处理与表层改性技术路线图项目组. 中国热处理与表层改性技术路线图[M]. 中国工程院. 2013.
[4]张建国, 丛培武. 真空渗碳技术国内外概况及发展[J]. 金属热处理, 2003, 28(10): 52-55.
Zhang Jianguo, Cong Peiwu. Development of vacuum carburizing technology at home and abroad[J]. Heat Treatment of Metals, 2003, 28(10): 52-55.
[5]张善庆, 张连进. 低压真空渗碳技术及低压真空渗碳多用炉[J]. 航空制造技术, 2000(6): 52-55.
Zhang Shanqing, Zhang Lianjin. Low pressure vacuum carburizing technology and low-pressure vacuum carburizing furnace[J]. Aviation Manufacturing Technology, 2000(6): 52-55.
[6]王志坚, 徐成海, 李福忠, 等. 真空高压气淬技术和设备的进展[J]. 真空, 2002(6): 14-20.
Wang Zhijan, Xu Chenghai, Li Fuzhong, et al. Development in technique and equipment of high-pressure gas quenching vacuum furnaces[J]. Vacuum, 2002(6): 14-20.
[7]董小虹, 王桂茂, 陈志强, 等. 国产底装料立式多用炉试验研究[J]. 金属热处理, 2003, 32(8): 101-104.
Dong Xiaohong, Wang Guimao, Chen Zhiqiang, et al. Experimentation research of bell-type furnace made in China[J]. Heat Treatment of Metals, 2003, 32(8): 101-104.
[8]董小虹, 王桂茂, 陈志强, 等. 精密可控气氛渗氮技术及其设备[J]. 金属热处理, 2011, 36(7): 115-120.
Dong Xiaohong, Wang Guimao, Chen Zhiqiang, et al. Accurate controlled atmosphere nitriding technology and equipment[J]. Heat Treatment of Metals, 2011, 36(7): 115-120.
[9]张克俭. 淬火冷却过程控制中的新认识与新技术[J]. 金属热处理, 2010, 35(10): 103-112.
Zhang Kejian. New cognitions and techniques about control of quenching cooling process[J]. Heat Treatment of Metals, 2010, 35(10): 103-112.
[10]孙炳超, 朱文明. 真空清洗技术的研发[J]. 金属热处理, 2002, 27(2): 36-38.
Sun Bingchao, Zhu Wenming. R&D of vacuum washing technologies[J]. Heat Treatment of Metals, 2002, 27(2): 36-38.
[11]全国工业电热设备标准化技术委员会. 清洁节能热处理装备技术要求及评价体系: GB/T 36561—2018[S]. 北京. 中国国家标准化管理委员会, 2018.

[1]	Zhang Yucheng, Jia Haomei. Simple discussion on standards about post-weld heat treatment of 347H pressure pipe for hydrogen production unit [J]. Heat Treatment of Metals, 2023, 48(1): 270-276.
[2]	Xu Yueming, Li Qiao, Gao Zhi, Luo Xinmin. Structure of green and low-carbon heat treatment standard system [J]. Heat Treatment of Metals, 2022, 47(1): 1-6.
[3]	Zhuang Quan, Wang Yutian, Dong Zhipeng. Comparative analysis of evaluation standards of carbide network in high carbon chromium bearing steel [J]. Heat Treatment of Metals, 2021, 46(6): 27-30.
[4]	Lai Xianhong, Zeng Hui, Yang Huachun, Zhang Wei. Reasonableness discussion on hardness upper limit of normalized and tempered T22 steel tubes specified in ASME SA-213M [J]. Heat Treatment of Metals, 2021, 46(3): 239-242.
[5]	Hu Zhijie, Feng Junning, Ma Zhongxian, Xie Chen. Current status of heat treatment standards for titanium and titanium alloys [J]. Heat Treatment of Metals, 2021, 46(3): 243-246.
[6]	Cui Guibin, Ju Xinhua, Meng Yang, Yin Lixin. EBSD scanning area parameter optimization based on quantification of retained austenite in steel [J]. Heat Treatment of Metals, 2021, 46(1): 225-229.
[7]	Bi Geping, Chen Jinzhe, Tan Wenhua, Li Qiao. Comparative analysis of standards for determining average grain size [J]. Heat Treatment of Metals, 2020, 45(4): 212-220.
[8]	Luo Ping, Shi Yiqing, Li Xianjun, Zhang Wenliang, Zhou Tong, Sun Meng. Development of non-standard immersion quenching equipment for aluminum parts [J]. Heat Treatment of Metals, 2020, 45(4): 236-241.
[9]	Jia Wenqing, Liu Siwei, Yuan Shuai, Xu Yingjun, Jia Kaili, Chen Mingya, Lai Yunting. Aging behavior of 60Si2MnA spring steel shims for steam turbine in nuclear power plant [J]. Heat Treatment of Metals, 2020, 45(10): 236-240.
[10]	Xu Yueming1, Li Qiao1, Luo Xinmin2. Development priorities of heat treatment technology in our country [J]. HTM, 2017, 42(4): 1-5.
[11]	Hu Xiaoli1, Li Qiao1, ZuoXunwei2, ChenNailu2. Status of quenching technology and the standard research [J]. HTM, 2017, 42(2): 101-107.
[12]	Xu Fei1, Yang Zhenming2, Li Shenghua1, Shao Huichang1,2 . Technical modification of resistance furnace conforming to the AMS 2750E for special alloy heat treatment [J]. HTM, 2016, 41(9): 188-194.
[13]	Bao Wenqiang, Luo Defu，Zhang Lei. Mechanical properties of N80 steel oil tube after QPQ treatment [J]. HTM, 2016, 41(5): 57-61.
[14]	Xu Yueming1, Li Qiao1, Luo Xinmin2, Shao Zhoujun1. Technology progress in teat treatment [J]. HTM, 2015, 40(9): 1-15.
[15]	Zhang Suying1, Zhou Zhimin1,Wu Xiaosu1,Guan Qifeng2. Trace rolling strengthening technology of steep-pitch nonstandard thread [J]. HTM, 2015, 40(4): 135-138.