Effect of double aging on mechanical properties of ZL205A alloy

doi:10.13251/j.issn.0254-6051.2024.02.022

Abstract

Abstract: Double aging treatment was carried out for ZL205A alloy test piece, and the influence of double aging on the microstructure and mechanical properties was explored. The results show that the double aging can improve the microstructure and the comprehensive mechanical properties of the test piece, especially the elongation. After multi-stage solution heat treatment of 500 ℃×30 min+535 ℃×60 min+540 ℃×720 min and aging of 150 ℃×540 min+210 ℃×300 min, the ZL205A alloy exhibits the highest tensile strength of 428.5 MPa, the highest hardness of 126 HBW, and the highest elongation of 9.3%. This heat treatment process can stabilize the microstructure of castings for different batches, obtain good comprehensive mechanical properties.

Key words: ZL205A alloy, double aging, mechanical properties

CLC Number:

TG113.25

Yang Jingping, Zhou Wenfeng, Wen Fulin, Liu Jianhui. Effect of double aging on mechanical properties of ZL205A alloy[J]. Heat Treatment of Metals, 2024, 49(2): 149-152.

References

[1]杜艳芝. 热处理工艺对变质铸造Al-Cu合金组织与力学性能的影响[D]. 长春: 吉林大学, 2009.
[2]黄星, 潘清林, 李波, 等. 双级时效对含Sc的Al-Zn-Mg-Zr合金组织与性能的影响[J]. 中南大学学报(自然科学版), 2015, 46(11): 4034-4043.
Huang Xing, Pan Qinglin, Li Bo, et al. Effect of two-stage aging on microstructure and properties of Al-Zn-Mg-Zr alloy containing Sc[J]. Journal of Central South University Science and Technology, 2015, 46(11): 4034-4043.
[3]梁文杰, 潘清林, 何运斌. 双级时效对含Sc的Al-Cu-Li-Zr合金组织与性能的影响[J]. 中南大学学报(自然科学版), 2011, 42(8): 2260-2265.
Liang Wenjie, Pan Qinglin, He Yunbin. Effect of double-stage aging treatment on microstructure and mechanical properties of Al-Cu-Li-Zr alloy containing Sc[J]. Journal of Central South University Science and Technology, 2011, 42(8): 2260-2265.
[4]李晓含, 贺嘉宁, 苏睿明, 等. 双级时效对7075合金应力腐蚀性能影响[J]. 有色金属科学与工程, 2022, 13(3): 69-75.
Li Xiaohan, He Jianing, Su Ruiming, et al. Effect on stress corrosion cracking of alloy 7075 with two-step aging[J]. Nonferrous Metals Science and Engineering, 2022, 13(3): 69-75.
[5]赵凤, 鲁法云, 郭富安. 7050铝合金双级时效制度的研究[J]. 金属热处理, 2015, 40(11): 149-153.
Zhao Feng, Lu Fayun, Guo Fuan. Two-step aging process of 7050 aluminum alloy[J]. Heat Treatment of Metals, 2015, 40(11): 149-153.
[6]冉凡青, 鄢勇, 刘俊涛, 等. 7075铝合金T73双级过时效工艺研究[J]. 世界有色金属, 2016(20): 120, 122.
Ran Fanqing, Yan Yong, Liu Juntao, et al. Study on T73 two-stage overaging treatment for 7075 aluminium alloy[J]. World Nonferrous Metals, 2016(20): 120, 122.
[7]代自莹, 谢方亮, 马龙飞, 等. 双级时效对6005A铝合金组织及性能的影响[J]. 铝加工, 2022(4): 15-18.
Dai Ziying, Xie Fangliang, Ma Longfei, et al. Effect of two-stage aging on microstructure and properties of 6005A aluminum alloy[J]. Aluminium Fabrication, 2022(4): 15-18.
[8]张海珍. ZL205A高强度铝铜合金铸造性能及工艺技术研究[D]. 太原: 中北大学, 2010.
[9]龚海军. 高强度铝铜合金稀土变质工艺及其组织性能研究[D]. 焦作: 河南理工大学, 2007.
[10]王炳. 双级固溶与时效处理ZL205A合金的组织及性能研究[D]. 兰州: 兰州理工大学, 2020.
[11]王一, 刘晓霏, 宋晓玲. 大型ZL205A合金铸件热处理对组织性能的影响[J]. 航天制造技术, 2010(2): 22-25.
Wang Yi, Liu Xiaofei, Song Xiaoling. Study on microstructure and properties of large ZL205A alloy casting heat treatment[J]. Aerospace Manufacturing Technology, 2010(2): 22-25.
[12]Ringer S P, Hono K. Microstructural evolution and age hardening in aluminium alloys: Atom probe field-ion microscopy and transmission electron microscopy studies[J]. Materials Characterization, 2000, 44(1/2): 101-131.

[1]	Li Rongbin, Zong Zaikang, Zhang Zhixi, Zhang Rulin. Effect of Si addition on microstructure and properties of as-cast CoCrFeMnNi high entropy alloy [J]. Heat Treatment of Metals, 2024, 49(2): 45-52.
[2]	Yang Jie, Wang Decheng, Li Xianjun, Wu Xiaolin, Hou Junqing, Yang Tao, Zhang Sai. Influence of Q&P process on mechanical properties and microstructure of 38MnB5Nb ultra high strength steel [J]. Heat Treatment of Metals, 2024, 49(2): 77-83.
[3]	Cui Yi, Cao Wenquan, Wang Yan, Cui Jihong, Ma Chao, Tian Zhongjie, Zhang Yunfei. Influence of solution temperature and cooling method on microstructure and properties of 00Cr40Ni55Al3Ti alloy [J]. Heat Treatment of Metals, 2024, 49(2): 142-148.
[4]	Liu Yang, Qi Haiquan, Qin Xiangzhi, Han Xiangnan, Li Tianran. Solution and aging behavior of Al-9.2Zn-2.4Mg-1.5Cu aluminum alloy extrusion sheet in hydrothermal environment [J]. Heat Treatment of Metals, 2024, 49(2): 166-171.
[5]	Jin Dongliang, Wang Gaofeng, Ma Xiqiang, Yu Weitao, Di Zhengxian, Wei Shizhong. Mechanical properties of quenched low alloy medium-carbon steel [J]. Heat Treatment of Metals, 2024, 49(2): 172-178.
[6]	Cai Xiaoye, Cheng Zonghui, Dong Dingping, Bai Bin, Xie Suijie. Effect of heat treatment on microstructure and mechanical properties of Ti-6Al-4V titanium alloy formed by laser powder bed fusion [J]. Heat Treatment of Metals, 2024, 49(2): 183-189.
[7]	Hu Shengshuang, Chen Suming, Yan Jiawei, Yue Shan, Gao Xiaoying, Ouyang Delai. Effect of aging temperature on microstructure and mechanical properties of TB18 titanium alloy [J]. Heat Treatment of Metals, 2024, 49(2): 190-194.
[8]	Zhang Zhi, Luo Dengchao, Li Xusheng, Li Qian, Liang Jiawei, Su Songlin, Ren Weining, Wang Sha. Effect of heat treatment temperature on microstructure and properties of TA15 titanium alloy pipe [J]. Heat Treatment of Metals, 2024, 49(2): 195-198.
[9]	He Xiaoyong, Xing Shuqing, Lang Ruiqing, Liu Yongzhen, Chen Zhongyi, Ma Yonglin. Effect of pulsed magnetic field on microstructure and properties of TC18 titanium alloy during aging [J]. Heat Treatment of Metals, 2024, 49(2): 203-207.
[10]	Dong Xinxin, Wu Jing, Li Menghuan, Tian Yaqiang, Tang Qin. Effect of tempering time on microstructure and mechanical properties of Cr-Ni-Cu high strength steel for ships [J]. Heat Treatment of Metals, 2024, 49(2): 208-214.
[11]	Li Jiahui, Wang Fuxue, Fang Xiaoying, Wang Hongtao. Influence of cooling method on microstructure and mechanical properties of 45CrNiMoVA high-strength steel [J]. Heat Treatment of Metals, 2024, 49(2): 215-219.
[12]	Wei Wei, Luo Xiong, Fan Junming, Chen Liubin, Wu Mingxia. Effect of heat treatment on microstructure and mechanical properties of high-pressure gas cylinder head [J]. Heat Treatment of Metals, 2024, 49(2): 220-223.
[13]	Wang Fuxue, Li Jiahui, Wang Qiang, Wang Hongtao. Effect of surface mechanical rolling treatment on microstructure and mechanical properties of annealed TWIP steel [J]. Heat Treatment of Metals, 2024, 49(2): 274-280.
[14]	Song Tijie, Wang Changyu, Wang Jue, Yu Yanyan, Lu Zengwei, Jin Dongyan. Effect of thermal exposure on microstructure and mechanical properties of Ti55 alloy [J]. Heat Treatment of Metals, 2024, 49(1): 15-21.
[15]	Zhu Jiawu, Ouyang Sheng. Effect of annealing on microstructure, mechanical properties and magnetic properties of FeCoNi_2-xMnGa_x high-entropy alloys [J]. Heat Treatment of Metals, 2024, 49(1): 22-31.