Simulation and calculation of heat treatment parameters and thermophysical properties of 16CrSiNi steel using JMatPro software

doi:10.13251/j.issn.0254-6051.2024.07.007

Abstract

Abstract: Thermodynamic equilibrium phase composition, Jominy hardenability, phase transition, thermophysical properties and mechanical properties after quenching and tempering of the 16CrSiNi steel were simulated by using JMatPro software, and the thermodynamic equilibrium phase compositions, hardenability curves, TTA curves, TTT curves, CCT curves, quenching microstructure, mechanical properties after quenching and tempering, thermophysical properties under different temperatures as density, thermal conductivity, Young's modules, specific heat, Poisson's ratio and enthalpy were obtained.

Key words: 16CrSiNi steel, JMatPro, equilibrium phase, mechanical properties, hardenability, thermophysical properties

CLC Number:

TG161
TB31

Ma Luyi, Du Qingyin, Li Shijian, Yang Lixin, Liu Gang, Wang Xinyu. Simulation and calculation of heat treatment parameters and thermophysical properties of 16CrSiNi steel using JMatPro software[J]. Heat Treatment of Metals, 2024, 49(7): 42-46.

[1]	Yan Wenchao, Gao Bo, Xiao Lirong, Zhou Hao. Microstructure and mechanical properties of ultrafine grained heterostructured dual-phase steel prepared by warm rolling and intercritical annealing [J]. Heat Treatment of Metals, 2024, 49(7): 54-62.
[2]	Ji Xuanming. Recrystallized grain growth behavior and its effect on aging behavior of cold-rolled Ti-3.5Al-5Mo-4V alloy sheet [J]. Heat Treatment of Metals, 2024, 49(7): 63-69.
[3]	Liu Huashen, Sun Youping, He Jiangmei, Luo Guojian, Pei Mengyu. Effect of Al content and homogenization on microstructure and damping properties of Mg-Al binary alloys [J]. Heat Treatment of Metals, 2024, 49(7): 70-77.
[4]	Li Zhongbo, Wu Zhifang, Wu Run. Research progress of low alloy martensitic wear-resistant steel [J]. Heat Treatment of Metals, 2024, 49(7): 132-138.
[5]	Jiang Junjie, Wang Yongbiao, Xiao Zhiling, Fan Jianglei, Zhang Zhengwen. Effect of annealing temperature on microstructure and mechanical properties of selective laser melted TA15 titanium alloy [J]. Heat Treatment of Metals, 2024, 49(7): 241-248.
[6]	Lu Mingxia, Zhang Lei, Wang Xinshe. Effect of normalizing temperature on microstructure and mechanical properties of 36MnVS4 and 46MnVS5 steels for fracture splitting connecting rod [J]. Heat Treatment of Metals, 2024, 49(7): 249-253.
[7]	Meng Pinpin, Zhang Xiaobo. Effect of annealing treatment on microstructure and mechanical properties of pure copper [J]. Heat Treatment of Metals, 2024, 49(7): 267-273.
[8]	Xu Shuangqian, Dai Zhiyong, Wang Ziyu. Effect of heat treatment process on microstructure and mechanical properties of Al-6.5Zn-2.3Mg-2.5Cu-0.1Zr-0.2Sc alloy [J]. Heat Treatment of Metals, 2024, 49(7): 274-280.
[9]	Chen Jie, Gao Tianyu, Wang Shuang, Wang Yong, Wang Liangliang. Heat treatment process of 600 MPa hydroelectric steel based on orthogonal analysis method [J]. Heat Treatment of Metals, 2024, 49(7): 307-312.
[10]	Zhao Xiqing, Wang Fujie, Zhang Bingjun. Effect of tempering on microstructure and properties of direct quenched A387Gr11CL2 steel plate [J]. Heat Treatment of Metals, 2024, 49(7): 322-325.
[11]	Zhang Xinyu, Sui Xin, Luo Xudong, Cheng Suling, Zhang Yi, Chen Jinsheng, Zhang Wei. Heat treatment process of 6014 aluminum alloy cold rolled sheets for automobile [J]. Heat Treatment of Metals, 2024, 49(7): 331-335.
[12]	Wu Si, Li Feifan, Wang Xuemin, Shang Xueliang, Xu Xiangyu. Effect of annealing temperature on microstructure and mechanical properties of low-density steel for bogie frame [J]. Heat Treatment of Metals, 2024, 49(6): 8-16.
[13]	Liu Yiran, Li Lei. Effect of annealing process on tensile deformation behavior of the SLM AlSi10Mg alloy [J]. Heat Treatment of Metals, 2024, 49(6): 23-28.
[14]	An Qingsheng, Wan Decheng, Ma Shaokang, Li Jie, Zhang Qianxi. Effect of reverse phase transformation annealing on microstructure evolution and mechanical properties of medium manganese steel [J]. Heat Treatment of Metals, 2024, 49(6): 36-42.
[15]	Zhang Miao, Wan Decheng, Zhang Bo, Feng Yunli. Microstructure and properties of Fe-0.13C-2.0Mn-0.6Al multiphase steels annealed at different temperatures [J]. Heat Treatment of Metals, 2024, 49(6): 43-48.

Simulation and calculation of heat treatment parameters and thermophysical properties of 16CrSiNi steel using JMatPro software

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments