Research progress of low alloy martensitic wear-resistant steel

doi:10.13251/j.issn.0254-6051.2024.07.020

Abstract

Abstract: Research progress of low alloy martensitic wear-resistant steel was reviewed, mainly involving composition design, heat treatment process and its on microstructure and mechanical properties, and wear resistance. Composition design mainly adopts a small number of multi-component system, heat treatment processes include reheat quenching-tempering treatment, direct quenching-tempering treatment, subtemperature quenching-tempering treatment, quenching-partitioning treatment and quenching-partitioning-tempering treatment. By controlling the structure shape and distribution, the hardness and toughness can be matched reasonably. The wear resistance is improved by adjusting chemical composition, refining grain, optimizing rolling cooling process and proper tempering.

Key words: low alloy martensitic wear-resistant steel, chemical composition, heat treatment process, microstructure, mechanical properties, wear resistance

CLC Number:

TG142.1

Li Zhongbo, Wu Zhifang, Wu Run. Research progress of low alloy martensitic wear-resistant steel[J]. Heat Treatment of Metals, 2024, 49(7): 132-138.

References

[1]陈华辉. 耐磨材料应用手册[M]. 北京: 机械工业出版社, 2012.
[2]李德发. Ti微合金化高强韧马氏体耐磨钢开发及其应用性能研究[D]. 武汉: 武汉科技大学, 2020.
Li Defa. Development of Ti microalloyed martensitic wear-resistant steel with high strength and toughness and study of its application performance[D]. Wuhan: Wuhan University of Science and Technology, 2020.
[3]邓想涛, 王昭东, 袁国, 等. HB450低合金超高强耐磨钢组织与性能[J]. 东北大学学报(自然科学版), 2010, 31(7): 942-946.
Deng Xiangtao, Wang Zhaodong, Yuan Guo, et al. Microstructure and mechanical properties of HB450 ultra-high strength low-alloy abrasion resistant steel[J]. Journal of Northeastern University(Natural Science), 2010, 31(7): 942-946.
[4]麻衡, 周平, 杜军. 热处理工艺对NM500耐磨钢组织和性能的影响[J]. 金属热处理, 2015, 40(8): 159-163.
Ma Heng, Zhou Ping, Du Jun. Effect of heat treatment on mechanical properties of NM500 steel[J]. Heat Treatment of Metals, 2015, 40(8): 159-163.
[5]董娜, 徐永新, 杨晓. 淬火温度对工程机械用低合金耐磨钢组织与力学性能的影响[J]. 热加工工艺, 2020, 49(22): 123-125.
Dong Na, Xu Yongxin, Yang Xiao. Effects of quenching temperature on microstructure and mechanical properties of low alloy wear resistant steel for construction machinery[J]. Hot Working Technology, 2020, 49(22): 123-125.
[6]王川, 李新宇, 于涛. 离线淬火工艺对NM400耐磨钢组织与性能的影响[J]. 山东冶金, 2020, 42(4): 43-45.
Wang Chuan, Li Xinyu, Yu Tao. Effect of off-line quenching process on microstructure and properties of NM400 wear-resistant steel[J]. Shandong Metallurgy, 2020, 42(4): 43-45.
[7]Fu H, Xiao Q, Fu H. Heat treatment of multi-element low alloy wear-resistant steel[J]. Materials Science and Engineering A, 2005, 396(1/2): 206-212.
[8]张国庆, 王福明, 李天生, 等. 奥氏体化对含Nb NM500低合金高强度耐磨钢晶粒和硬度的影响[J]. 热加工工艺, 2014, 43(18): 94-97.
Zhang Guoqing, Wang Fuming, Li Tiansheng, et al. Influence of austenitizing on grainsize and hardness of high strength low alloy wear-resistant steel NM500 containing Nb[J]. Hot Working Technology, 2014, 43(18): 94-97.
[9]麻衡, 周平, 刘军刚, 等. 回火温度对NM360耐磨钢组织与性能的影响[J]. 金属热处理, 2011, 36(4): 66-68.
Ma Heng, Zhou Ping, Liu Jungang, et al. Effects of tempering temperature on microstructure and properties of NM360 wear-resistant steel[J]. Heat Treatment of Metals, 2011, 36(4): 66-68.
[10]邓想涛, 王昭东, 张逖, 等. HB450低合金超高强耐磨钢回火过程中的组织性能演变[J]. 钢铁, 2011, 46(5): 60-63.
Deng Xiangtao, Wang Zhaodong, Zhang Ti, et al. Microstructure and properties evolution of HB450 ultra-high strength low-alloy abrasion resistant steel during tempering[J]. Iron and Steel, 2011, 46(5): 60-63.
[11]常翔鸣, 高占勇, 赵喜伟, 等. 热处理工艺对低合金耐磨钢组织和性能的影响[J]. 内蒙古科技大学学报, 2013, 32(2): 144-147.
Chang Xiangming, Gao Zhanyong, Zhao Xiwei, et al. Effect of heat treatment process on microstructure and properties of low alloy wear resistant steel[J]. Journal of Inner Mongolia University of Science and Technology, 2013, 32(2): 144-147.
[12]Zhen F, Wang W, Yang H, et al. Effect of heat treatment on microstructure and mechanical properties of HB400 grade high strength abrasion resistant steel[J]. Journal of Iron and Steel Research, International, 2011, 18(S1): 637-640.
[13]Cao Y, Wang Z D, Kang J, et al. Effects of tempering temperature and Mo/Ni on microstructures and properties of lath martensitic wear-resistant steels[J]. Journal of Iron and Steel Research, International, 2013, 20(4): 70-75.
[14]朱震宇. 热处理工艺对NM500低合金高强度耐磨钢组织和性能的影响[D]. 武汉: 武汉科技大学, 2022.
Zhu Zhenyu. Effect of heat treatment process on microstructure and properties of NM500 low alloy high strength wear resisting steel[D]. Wuhan: Wuhan University of Science and Technology, 2022.
[15]胡日荣, 蔡庆伍, 武会宾, 等. 热处理工艺对NM500耐磨钢组织和力学性能的影响[J]. 北京科技大学学报, 2013, 35(8): 1015-1020.
Hu Rirong, Cai Qingwu, Wu Huibin, et al. Heat treatment influence on the microstructure and mechanical properties of NM500 wear resistant steel[J]. Journal of University of Science and Technology Beijing, 2013, 35(8): 1015-1020.
[16]张新, 宋仁伯, 温二丁. 亚温淬火温度对NM500耐磨钢组织和性能的影响[C]//第十一届中国热处理活动周论文集. 2016: 186-189.
[17]Speer J, Matlock D K, Cooman B C D, et al. Carbon partitioning into austenite after martensite transformation[J]. Acta Materialia, 2003, 51(9): 2611-2622.
[18]丁丽平. Q&P热处理工艺对低合金耐磨钢组织和性能的影响研究[D]. 郑州: 郑州大学, 2013.
Ding Liping. Study of Q&P heat treatment on microstructure and properties of low alloy wear resistant steel[D]. Zhengzhou: Zhengzhou University, 2013.
[19]李建. Q&P热工艺对低合金耐磨钢组织性能的影响研究[D]. 武汉: 武汉科技大学, 2019.
Li Jian. Effect of Q&P process on microstructure and properties of low alloy wear-resistant steel[D]. Wuhan: Wuhan University of Science and Technology, 2019.
[20]王佳, 时捷, 王存字, 等. 新型马氏体耐磨钢的热处理工艺研究[J]. 矿山机械, 2009(10): 1-4.
Wang Jia, Shi Jie, Wang Cunyu, et al. Study on heat treatment process of new type martensitic wear resistant steel[J]. Mining and Processing Equipment, 2009(10): 1-4.
[21]沈聪, 孔令男, 尹臣男, 等. 基于Q-P-C-T工艺的NM300耐磨钢组织、综合性能及残余应力调控[J]. 中南大学学报(自然科学版), 2022, 53(4): 1231-1240.
Shen Cong, Kong Lingnan, Yin Chennan, et al. Controlling on microstructure, comprehensive properties and residual stress of NM300 steel based on Q-P-C-T process[J]. Journal of Central South University: Science and Technology, 2022, 53(4): 1231-1240.
[22]关志强, 黄维刚, 王松, 等. 碳含量对低合金耐磨钢组织及耐磨性的影响[J]. 金属热处理, 2012, 37(8): 72-75.
Guang Zhiqiang, Huang Weigang, Wang Song, et al. Influence of carbon content on microstructure and abrasive resistance of the low alloy wear resistant steels[J]. Heat Treatment of Metals, 2012, 37(8): 72-75.
[23]彭军, 牛亮, 郭永, 等. V、Ti对NM400钢耐磨性能的影响[J]. 金属热处理, 2016, 41(2): 19-23.
Peng Jun, Niu Liang, Guo Yong, et al. Effect of V and Ti on wear resistance of NM400 steel[J]. Heat Treatment of Metals, 2016, 41(2): 19-23.
[24]Ojala N, Valtonen K, Heino V, et al. Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels[J]. Wear, 2014, 317(1): 225-232.
[25]苗隽, 刘志璞, 王群骄, 等. 钒微合金化对低合金耐磨钢组织与性能的影响[J]. 金属世界, 2020(6): 21-24, 30.
Miao Jun, Liu Zhipu, Wang Qunjiao, et al. Effect of vanadium micro-alloying on microstructure and property of low alloy wear resistant steels[J]. Metal Word, 2020(6): 21-24, 30.
[26]彭宏伟. 稀土元素对低合金耐磨钢组织和性能的影响[D]. 长沙: 中南大学, 2011.
Peng Hongwei. Effect of rare earth elements on microstructure and properties of low alloy wear-resistant steel[D]. Changsha: Central South University, 2011.
[27]王世军, 闫强军, 靳建锋. 稀土对NM450钢耐磨损性能与耐腐蚀性能的影响[J]. 冶金与材料, 2022, 42(1): 71-72.
Wang Shijun, Yan Qiangjun, Jin Jianfeng. Effect of rare earth on abrasion resistance and corrosion resistance of NM450 steel[J]. Metallurgy and Materials, 2022, 42(1): 71-72.
[28]Deng X, Wang Z, Han Y, et al. Microstructure and abrasive wear behavior of medium carbon low alloy martensitic abrasion resistant steel[J]. Journal of Iron and Steel Research, International, 2014, 21(1): 98-103.
[29]张雨佳, 王昭东, 邓想涛, 等. 低合金耐磨钢板NM600组织及其磨损性能研究[J]. 轧钢, 2016, 33(2): 5-9.
Zhang Yujia, Wang Zhaodong, Deng Xiangtao, et al. Microstructure and wear resistance behavior of low alloy abrasionresistant steel plate NM600[J]. Steel Rolling, 2016, 33(2): 5-9.
[30]马文高. 淬火温度对铬钼马氏体耐磨钢组织和力学性能的影响[J]. 上海金属, 2021, 43(4): 38-43.
Ma Wengao. Effect of austenitizing temperature on microstructure and mechanical properties of chrome-molybdenum martensite wear-resistant steel[J]. Shanghai Metals, 2021, 43(4): 38-43.
[31]程志彦, 郑留伟. 深冷处理对NM500耐磨钢性能与磨损行为的影响[J]. 中国冶金, 2020, 30(12): 65-71.
Cheng Zhiyan, Zheng Liuwei. Effect of cryogenic treatment on mechanical properties and wear behavior of NM500 wear resistantsteel[J]. China Metallurgy, 2020, 30(12): 65-71.
[32]杨继兰, 蒋元凯, 顾剑锋, 等. 奥氏体化温度对中碳淬火-配分钢干滑动摩擦磨损性能的影响[J]. 金属学报, 2018, 54(1): 21-30.
Yang Jilan, Jiang Yuankai, Gu Jianfeng, et al. Effect of austenitization temperature on the dry sliding wear properties of amedium carbon quenching and partitioning steel[J]. Acta Metallurgica Sinica, 2018, 54(1): 21-30.
[33]Wang Chunyu, Li Xiaodong, Chang Ying, et al. Comparison of three-body impact abrasive wear behaviors for quenching-partitioning-tempering and quenching-tempering 20Si2Ni3 steels[J]. Wear, 2016, 362-363: 121-128.
[34]朱康峰, 周一帆, 尤学文, 等. 三种热处理工艺对低合金耐磨钢组织和磨损性能的影响[J]. 材料热处理学报, 2021, 42(10): 108-115.
Zhu Kangfeng, Zhou Yifan, You Xuewen, et al. Effect of three kinds of heat treatment processes on microstructure and wear resistance of low alloy wear resistant steel[J]. Transactions of Materials and Heat Treatment, 2021, 42(10): 108-115.
[35]马冲, 李自刚, 宋凤鸣, 等. BW450马氏体耐磨钢在含高浓度石英砂的3. 5wt%NaCl浆体中的腐蚀磨损[J]. 热加工工艺, 2014, 43(22): 83-86.
Ma Chong, Li Zigang, Song Fengming, et al. Erosion-corrosion behavior of Shanghai Baosteel martensite wear resistance steel BW450 in 3. 5wt% NaCl slurry with high concentration quartz sands[J]. Hot Working Technology, 2014, 43(22): 83-86.
[36]斯松华, 胡德锐, 钟尧舜, 等. 贝氏体和马氏体耐磨钢的高温磨损性能对比研究[J]. 材料保护, 2018, 51(5): 61-63.
Si Songhua, Hu Derui, Zhong Yaoshun, et al. Comparative study on high temperature wear resistance of bainite and martensite wear resistant steels[J]. Materials Protection, 2018, 51(5): 61-63.