[1] |
Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui.
Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel
[J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
|
[2] |
Yu Chonghao, Liu Jia, Deng Xiangtao, Wang Zhaodong.
Preparation and mechanical properties of 304 stainless steel with heterogeneous lamella structure
[J]. Heat Treatment of Metals, 2022, 47(2): 86-90.
|
[3] |
Nong Xin, Gao Jinzhong, Wu Junwu, Shi Chunsheng, Zhao Naiqin.
Stress relaxation mechanism of 1Cr18Ni9 steel helical compression spring
[J]. Heat Treatment of Metals, 2022, 47(1): 106-112.
|
[4] |
Bai Shaobin, Xiao Wentao, Niu Weiqiang, Liang Wei, Li Dazhao.
Influence of annealing and annealing-aging process on microstructure and mechanical properties of hot-rolled medium manganese steel
[J]. Heat Treatment of Metals, 2022, 47(1): 245-249.
|
[5] |
Wu Hao, Gan Zhanghua, Lao Wenjie, Wu Chuandong, Wang Jiamin, Ni Qian.
Research progress on hardening effect and mechanism during annealing of metals
[J]. Heat Treatment of Metals, 2021, 46(9): 1-6.
|
[6] |
Xu Yan, Liu Yinglai, Li Liang, Nie Xianghui, Feng Zhenjun, Guo Lei, Liu Zhipeng.
Aging and annealing process of X80 pipeline steel after uniform plastic deformation
[J]. Heat Treatment of Metals, 2021, 46(8): 170-173.
|
[7] |
Li Mengge, Cheng Juqiang, Yin Sibo.
Effect of heat treatment and cooling process on microstructure and properties of bainitic steel tie-rods
[J]. Heat Treatment of Metals, 2021, 46(7): 178-181.
|
[8] |
Yu Wenchao, Li Yunkun, Xue Yanjun, Sun Ting, Shi Jie.
Influence of heat treatment on impact wear resistance of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2020, 45(6): 7-11.
|
[9] |
Zeng Yao, Yang Jianhong, Wang Bi, Qian Xuehai, Chen Xiaolong, Tian Yuhang.
Comparison of microstructure and properties of low-nickel austenitic stainless steels
[J]. Heat Treatment of Metals, 2020, 45(6): 163-166.
|
[10] |
Ye Zhifei, Sun Daxiang, Zhou Peng, Kuang Hongcong, Xiao Yongtong.
Effect of severe plastic deformation on microstructure and mechanical properties of 2519A aluminum alloy
[J]. Heat Treatment of Metals, 2020, 45(5): 187-191.
|
[11] |
Cui Yan, Sun Xinjun, Peng Xiying, Wang Licheng.
Cold work hardening and heat treatment softening of multilayered Ni/Al composites
[J]. Heat Treatment of Metals, 2020, 45(12): 175-179.
|
[12] |
Cheng Yefeng, Cheng Juqiang, Feng Yiting.
Effect of tempering temperature on microstructure and properties of high strength carbide-free bainitic steel seamless pipe
[J]. Heat Treatment of Metals, 2020, 45(11): 201-204.
|
[13] |
Kang Tao, Guo Jie, Zhou Wei, Chen Jun, Kuang Chunfu, Zhao Zhengzhi.
Effect of annealing temperature on mechanical properties of cold-rolled DP980 steel
[J]. HTM, 2020, 45(1): 6-10.
|
[14] |
Qin Fangcheng, Li Yongtang, Ju Li, Qi Huiping.
Microstructure evolution and dynamic recrystallization of as-cast Q235B steel flange blank based on work hardening rate
[J]. HTM, 2017, 42(2): 39-43.
|
[15] |
Zhang Lei1, Liu Hao2, Qi Xiangyu2, Hu Jun2, Du Linxiu2.
Effect of heat treatment on microstructure and mechanical properties of high strength and toughness medium-manganese steel ultra-heavy plate
[J]. HTM, 2017, 42(2): 141-145.
|