| [1] |
Shi Keqing, Guo Fu, An Longsen, Chen Yun, Du Ziyang, Wu Meng, Xu Qinpei.
Heat treatment process of 42CrMo4 steel wind power main shaft
[J]. Heat Treatment of Metals, 2021, 46(8): 201-204.
|
| [2] |
Zhao Xin'e.
Cracking analysis of 8418 steel barrel used for aluminum-melting
[J]. Heat Treatment of Metals, 2021, 46(6): 236-239.
|
| [3] |
Yan Youzeng, Zhang Hao, Cao Qi, Meng Gaoqiang, Xia Guofeng, Xu Shuang.
Causes analysis of quenching cracking of inner hole of first class planet carrier
[J]. Heat Treatment of Metals, 2021, 46(4): 236-238.
|
| [4] |
Zhou Yongqiang.
Causean analysis on longitudinal cracking of 35CrMo steel cylinder pin
[J]. Heat Treatment of Metals, 2021, 46(4): 239-242.
|
| [5] |
Li Chao, Wang Teng, Sun Rongqiang, Yang Ping, Zhang Baiyong.
Analysis and improvement of point defects on surface of hot dipaluminum-silicon plated steel sheet
[J]. Heat Treatment of Metals, 2021, 46(3): 213-217.
|
| [6] |
Zhang Jiawen, Fu Tianliang, Wu Hao, Wang Zhaodong.
Cause analysis on quenching cracking of 40CrNiMo7 steel forged shaft
[J]. Heat Treatment of Metals, 2021, 46(2): 213-217.
|
| [7] |
He Liangliang, Wang Yuandong, Wang Mengmeng, Hou Shengwen, Wang Yan.
Failure analysis of gear fracture cracking during bench test
[J]. Heat Treatment of Metals, 2021, 46(1): 235-238.
|
| [8] |
Liu Jingfu, Zhou Xiangchun, Qu Yingdong.
Research progress of stress corrosion cracking (SCC) of Al-Zn-Mg alloy
[J]. Heat Treatment of Metals, 2020, 45(9): 21-28.
|
| [9] |
Yuan Jingzhi, Shi Yuezhi, Xu Wenhua, Chen Lubin, Lü Yupeng.
Structure-defect analysis of crack failure in 42CrMo wind power spindle
[J]. Heat Treatment of Metals, 2020, 45(7): 206-209.
|
| [10] |
Chen Kaimin, Wen Chao, Liang Huilei.
Crack analysis of bearing chock and prevention measures
[J]. Heat Treatment of Metals, 2020, 45(4): 221-223.
|
| [11] |
Wang Ning, Ding Beidou, Cui Meng , Feng Zhaoping.
Cracking cause analysis of Cr12MoV steel cutting tool
[J]. Heat Treatment of Metals, 2020, 45(10): 246-248.
|
| [12] |
Zhou Renyuan, Zhu Lihui, Li Shixian, Zhai Guoli, Song Ming.
Reheat cracking susceptibility of modified T23 steel
[J]. HTM, 2020, 45(1): 20-25.
|
| [13] |
Chen Xiyuan, Guan Wei.
Analysis and countermeasures of common problems on using PAG polymer quenchant
[J]. HTM, 2020, 45(1): 48-52.
|
| [14] |
Liu Yanmei, Zhao Meilan, Feng Hui, Bai Yaru, Li Yan, Wang Tiegang.
Failure analysis on cracking of die-forged connecting rod of 7A09 alloy
[J]. HTM, 2020, 45(1): 234-238.
|
| [15] |
Yu Chunming, Zhang Jiming.
Failure analysis and improvement of bending cracking of low alloy Q345B steel treated by ultra-fast cooling process
[J]. HTM, 2020, 45(1): 239-244.
|
