| [1] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Finite element analysis of novel martensitic heat-resistant steel G115 heavy castings
[J]. Heat Treatment of Metals, 2022, 47(2): 229-235.
|
| [2] |
Pan Zhongde, Zhang Pengcheng, Wu Huibin, Hu Qilong.
Effect of normalizing rolling and subsequent normalizing process on microstructure and properties of S460NL high-strength low-temperature structural steel
[J]. Heat Treatment of Metals, 2021, 46(9): 142-145.
|
| [3] |
Zhao Peilin, Liu Chao, Wu Huiliang, Zheng Li.
Effect of normalizing temperature on microstructure and low temperature toughness of 355 MPa heavy section steel for marine engineering
[J]. Heat Treatment of Metals, 2021, 46(6): 102-106.
|
| [4] |
Li Zhaoguo, Wang Ke, Ji Xianbin, Xu Bin, Wei Haixia.
Effect of tempering temperature on microstructure and properties of 00Cr13Ni5Mo super martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(5): 95-98.
|
| [5] |
Luo Ping, Li Xianjun, Zhang Wenliang, Wang Jin, Wu Xiaolin, Shang Yong, Shi Yuezhang.
Development of walking beam production line for isothermal normalizing of gear shaft blanks
[J]. Heat Treatment of Metals, 2021, 46(4): 243-246.
|
| [6] |
Yin Heping, Yin Minjie.
Optimization of heat treatment process of SCM420 steel planetary gear for industrial robot
[J]. Heat Treatment of Metals, 2021, 46(3): 104-108.
|
| [7] |
Yuan Rui, Pan Zhongde, Wu Huibin.
Effect of normalizing process on microstructure and properties of 420 MPa grade steel plate for offshore wind power
[J]. Heat Treatment of Metals, 2021, 46(10): 112-116.
|
| [8] |
Niu Wenming, Zhang Guiyang, Zuo Yongping, Wang Tao.
Discussion on a new isothermal normalizing process of 18CrNiMo7-6 carburizing steel
[J]. Heat Treatment of Metals, 2021, 46(1): 84-87.
|
| [9] |
Cong Jianchen, Yu Xiaodong, Ma Mingzhu, Wu Yongchen, Zhang Huadong.
Failure cause analysis of crankshaft blank in cold straightening process
[J]. Heat Treatment of Metals, 2020, 45(7): 224-227.
|
| [10] |
Liu Yifei, Lu Hui, Sun Shaoheng, Zhao Aimin.
Effect of recrystallization annealing temperature on corrosion resistance of copper-bearing ferritic antibacterial stainless steel
[J]. Heat Treatment of Metals, 2020, 45(5): 51-55.
|
| [11] |
Wang Shaohua, Sun Yueying, Ye Xi, Xie Niansuo, Jing Ran.
Microstructure and properties of 1060 Al-based multi-layered composite reinforced with Fe-based amorphous alloy
[J]. Heat Treatment of Metals, 2020, 45(4): 75-78.
|
| [12] |
Han Shaoqiang, Zhao Jiqing, Wan Rundong, Yang Gang.
Effect of microstructure on long-term aging stability of 2.25Cr-1Mo steel
[J]. HTM, 2020, 45(2): 11-18.
|
| [13] |
Wang Huizhen, Zhai Yuewen, Zhou Leyu.
Isothermal normalizing of TL-4521 steel for gear by residual heat after forging
[J]. Heat Treatment of Metals, 2020, 45(12): 92-96.
|
| [14] |
Bai Ruoxin, Liu Zhenbao, Cao Jianchun, Yang Zhe.
Effect of normalizing temperature on microstructure and properties of USS122G ultra-high strength stainless steel
[J]. Heat Treatment of Metals, 2020, 45(11): 73-77.
|
| [15] |
Wang Huizhen, Zhai Yuewen, Zhou Leyu.
Isothermal normalizing process of 18CrNiMo7-6 gear steel directly after warm forging
[J]. Heat Treatment of Metals, 2020, 45(11): 78-82.
|
