| [1] |
Dai Jianke, Han Shun, Li Yong, Liu Xianmin, Wang Chunxu, Pang Xuedong, Li Jianxin.
Microstructure and properties of C69 gear steel for aviation after high temperature carburizing
[J]. Heat Treatment of Metals, 2022, 47(4): 219-225.
|
| [2] |
Zhang Ning, Gao Xing, Wang Zhilin, Jiang Bo, Liu Yazheng.
Analysis of abnormal microstructure and properties of 18CrNiMo7-6 steel gear
[J]. Heat Treatment of Metals, 2022, 47(4): 268-273.
|
| [3] |
Lu Jinsheng, Zhang Heng, Xu Hongxiang, Guo Shirui.
Ion nitriding technology of inner gear ring of 6.5 MW nuclear power pump
[J]. Heat Treatment of Metals, 2022, 47(3): 97-101.
|
| [4] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [5] |
Zhao Yiqi, Nie Xiaolong, Zhao Sixin, Gao Jiaqiang, Liu Xinkuan.
Predicting model of gear steel hardenability based on extreme learning machine
[J]. Heat Treatment of Metals, 2022, 47(3): 227-233.
|
| [6] |
Hu Fangzhong, Yang Shaopeng, Jin Guozhong, Hu Naiyue, Wang Kaizhong, Yang Zhiqiang, Chen Shijie.
Effect of quenching temperature on microstructure evolution and mechanical properties of Nb microalloyed gear steel 18CrNiMo7-6
[J]. Heat Treatment of Metals, 2022, 47(2): 105-111.
|
| [7] |
Zang Yan, Wang Jianjun.
Simulation of end quenching process and prediction of hardenability of Cr-Ni-Mo gear steel
[J]. Heat Treatment of Metals, 2022, 47(2): 257-261.
|
| [8] |
Dai Yanzhang, Han Shun, Li Yong, Zhou Min, Wang Chunxu.
Effect of tempering temperature on microstructure and properties of a new generation transmission gear steel C61
[J]. Heat Treatment of Metals, 2022, 47(1): 49-55.
|
| [9] |
Xu Hongxiang, Wang Hongwei, Zhang Heng, Wang Jun, Zhao Shaofu.
Crack analysis of case-hardened 20Cr2Ni4 steel gear after assembly
[J]. Heat Treatment of Metals, 2021, 46(8): 250-253.
|
| [10] |
Zhao Shaofu, Xu Hongxiang, Wang Hongwei, Guo Jingqiang, Li Ziyan, Chen Yan.
Experimental study on improving carburizing and quenching hardness of gear made of 20Cr2Ni4A steel
[J]. Heat Treatment of Metals, 2021, 46(7): 120-125.
|
| [11] |
Liang Xiaodong, Ju Zhe, Liu Ji, Wang Chenchong, Wang Xu.
Effect of quenching temperature on microstructure and mechanical properties of gear steel C64
[J]. Heat Treatment of Metals, 2021, 46(4): 88-94.
|
| [12] |
Yan Youzeng, Zhang Hao, Cao Qi, Meng Gaoqiang, Xia Guofeng, Xu Shuang.
Causes analysis of quenching cracking of inner hole of first class planet carrier
[J]. Heat Treatment of Metals, 2021, 46(4): 236-238.
|
| [13] |
Luo Ping, Li Xianjun, Zhang Wenliang, Wang Jin, Wu Xiaolin, Shang Yong, Shi Yuezhang.
Development of walking beam production line for isothermal normalizing of gear shaft blanks
[J]. Heat Treatment of Metals, 2021, 46(4): 243-246.
|
| [14] |
Yin Heping, Yin Minjie.
Optimization of heat treatment process of SCM420 steel planetary gear for industrial robot
[J]. Heat Treatment of Metals, 2021, 46(3): 104-108.
|
| [15] |
Cheng Yuan, Hu Fangzhong, Hu Naiyue, Wang Kaizhong, Wang Lianglin, Jin Guozhong, Hao Zhenyu.
Failure analysis of driving bevel gear of heavy truck rear axle
[J]. Heat Treatment of Metals, 2021, 46(2): 218-222.
|
