Cracking analysis of girth weld

[1]

Zhao Xin, Chen Zhengzong, Zhao Haiping. Simulation of heating process for martensitic heat resistant steel G115 heavy pipe blanks [J]. Heat Treatment of Metals, 2022, 47(4): 208-212.

[2]

Yang Jie, Wang Xi, Zhou Jie, Wu Jianxiang, Qu Zhiyuan, Dai Heping, Peng Haijun. Formation mechanism of quenching cracks in branch-shaped structure of steering knuckle forgings [J]. Heat Treatment of Metals, 2022, 47(4): 263-267.

[3]

Dong Rui, Chen Lin, Cen Yaodong, Bao Xirong. Microstructure and fatigue crack growth of a bainitic steel under different heat treatments [J]. Heat Treatment of Metals, 2022, 47(2): 153-158.

[4]

Zhao Xin, Chen Zhengzong, Zhao Haiping. Finite element analysis of novel martensitic heat-resistant steel G115 heavy castings [J]. Heat Treatment of Metals, 2022, 47(2): 229-235.

[5]

Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui. Post weld heat treatment process to eliminate welding distortion of large structural parts [J]. Heat Treatment of Metals, 2022, 47(2): 236-242.

[6]

[7]

Wang Chunhua,Wang Feng , Wang Fengliang, Fang Hongjie, Yang Lijuan. Effect of multi-stage solid solution treatment on microstructure and properties of 7136-0.35La aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 124-128.

[8]

Zhou Jianbo, Zhang Jing, Zhang Leitao, Li Haitao, Fan Shuaiqi, Xu Jinfu. Effect of laser process parameters on crack rate and microstructure of Ni60/WC clad coating [J]. Heat Treatment of Metals, 2021, 46(9): 252-257.

[9]

Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili. Finite element simulation of quenching process of large aluminum alloy forgings [J]. Heat Treatment of Metals, 2021, 46(9): 279-283.

[10]

Chen Zhenhao, Xu Jun, Wang Jing, Gu Jianfeng. Development of a dedicated finite element solver for heat treatment [J]. Heat Treatment of Metals, 2021, 46(8): 77-84.

[11]

Shi Keqing, Guo Fu, An Longsen, Chen Yun, Du Ziyang, Wu Meng, Xu Qinpei. Heat treatment process of 42CrMo4 steel wind power main shaft [J]. Heat Treatment of Metals, 2021, 46(8): 201-204.

[12]

Nie Xiaolong, Gao Jiaqiang, Meng Kairen, Wang Junyi, Liu Xinkuan. Fracture failure analysis of 60Si2Mn spring steel [J]. Heat Treatment of Metals, 2021, 46(8): 246-249.

[13]

Xu Hongxiang, Wang Hongwei, Zhang Heng, Wang Jun, Zhao Shaofu. Crack analysis of case-hardened 20Cr2Ni4 steel gear after assembly [J]. Heat Treatment of Metals, 2021, 46(8): 250-253.

[14]

Yang Qingxu, Wang Xue, Ma Junpeng, Yang Chao. Crack analysis of T23/12Cr1MoV dissimilar steel welded joints during PWHT in the water-wall of USC boiler [J]. Heat Treatment of Metals, 2021, 46(7): 218-222.

[15]

Song Quan, Dan Ting, Li Xiaoguang, Gao Mingsen, Cao Huihui. Fracture cause analysis of W6Mo5Cr4V2Al high speed steel twist drill [J]. Heat Treatment of Metals, 2021, 46(7): 229-232.

PDF