| [1] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [2] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
| [3] |
Li Tianfu, Qu Shen, Dong Chen, Zhang Zhefeng.
Failure analysis on spindle bearing of numerical control machine tool
[J]. Heat Treatment of Metals, 2022, 47(4): 258-262.
|
| [4] |
Chen Liansheng, Fang Ning, Cao Zhongqian, Yang Zixuan, Li Hongbin, Pan Hongbo, Tian Yaqiang.
Effect of intercritical warm-rolling reduction ratio on microstructure and properties of medium manganese steel treated by quenching and partitioning
[J]. Heat Treatment of Metals, 2022, 47(3): 28-33.
|
| [5] |
Wang Guodi, Jing Ran, Zhang Manxue, Feng Tian, Yu Guoqing, Xie Niansuo.
Effects of cold rolling deformation and recrystallization on microstructure and properties of TC4 alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 48-52.
|
| [6] |
Mei Jinna, Jiang Fengyang, Wei Na, Liu Langlang, Si Fang, Liu Songtao, Wang Junbo, Liu Jiangnan.
Effect of rolling deformation on microstructure and mechanical properties of high-entropy alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 67-71.
|
| [7] |
Yu Xinlei, Zheng Xiaoping, Cao Tong, Tian Yaqiang, Chen Liansheng.
Effect of isothermal temperature on semi-solid microstructure of 7075 aluminum alloy prepared by rolling SIMA method
[J]. Heat Treatment of Metals, 2022, 47(2): 164-167.
|
| [8] |
Li Liangjun, Zhang Jiamin, Chi Hongxiao, Zhou Jian.
Effect of Co microalloying on microstructure and properties of M2 high speed steel
[J]. Heat Treatment of Metals, 2022, 47(1): 73-78.
|
| [9] |
Jiang Yingge, Huang Jiwu, Jiang Fuqing, Xu Chenglong.
Effect of cold rolling mode and annealing temperature on microstructure and texture evolution of Al-4Cu-0.73Mg alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 58-64.
|
| [10] |
Huang Juan, Huang Yuanchun, Shen Zhenyu, Li Xiangyue, Zeng Yu, Yang Gengchen.
Effect of finish rolling temperature and annealing temperature on microstructure and properties of 5052 aluminum alloy sheet
[J]. Heat Treatment of Metals, 2021, 46(9): 79-84.
|
| [11] |
Meng Yuerui, Zhao Xianping, Zhou Bowen.
Cause analysis of r value decreasing of low carbon aluminum-killed steel sheet developed based on ferrite rolling process
[J]. Heat Treatment of Metals, 2021, 46(9): 211-215.
|
| [12] |
Zhang Hongliang, Feng Guanghong, Wang Baoshan.
Strengthening mechanism of Nb(C, N) precipitation and controlled cooling process optimization of Nb-containing steel bars under direct rolling condition
[J]. Heat Treatment of Metals, 2021, 46(8): 133-138.
|
| [13] |
Yang Xiaowei, Chen Huande, Zhou Yun, Zhang Yu.
Effect of rolling process on microstructure and properties of V-Nb micro-alloyed HRB600E steel rebar
[J]. Heat Treatment of Metals, 2021, 46(8): 150-155.
|
| [14] |
Zhang Huiyun, Meng Xianming, Zheng Liuwei, Liang Wei.
Effect of sensitization on hydrogen embrittlement sensitivity of 304 austenitic stainless steel in different states
[J]. Heat Treatment of Metals, 2021, 46(8): 164-169.
|
| [15] |
Fan Qingsong, Tian Hang, Xie Meng, Zhou Jun, Yang Zhongbo, Zhao Wenjin.
Grain microstructure evolution in Zr-Sn-Nb-Fe zirconium alloy plates during rolling and heat treatment
[J]. Heat Treatment of Metals, 2021, 46(7): 47-50.
|
