| [1] |
Shao Chunjuan, Zhen Fan, Qu Jinbo, Luo Guangjie.
Influence of hot deformation parameters on bonding strength of 316L/Q370qE clad plate
[J]. Heat Treatment of Metals, 2021, 46(5): 132-137.
|
| [2] |
Li Jian, Feng Zaixin, Zuo Sen, Yao Yukang, Guo Xiaosen.
Optimum heat treatment process of Cu-Ni-Sn alloy by orthogonal test
[J]. Heat Treatment of Metals, 2021, 46(3): 61-66.
|
| [3] |
Cong Xiangzhou, Peng Xingna, Peng Xiankuan, Wang Tao, Chen Zhengzong, Jiang Haifeng, Li Chuanyong, Zhang Shuying.
Heat treatment for G115 large diameter pipe fittings
[J]. Heat Treatment of Metals, 2021, 46(3): 90-95.
|
| [4] |
Yan Xianguo, Li Fan, Chen Zhi, Yao Yongchao.
Multi-objective optimization model of deep cryogenic process for conical pick
[J]. Heat Treatment of Metals, 2021, 46(2): 95-99.
|
| [5] |
Lu Chunguang, Mei Guojun, Lin Shengxiu, Qian Cairang, Li Yang, Lu Xiaoxue.
Optimization of heat treatment process of 3379BA1 steam turbine blade steel
[J]. Heat Treatment of Metals, 2021, 46(11): 199-201.
|
| [6] |
Liu Ruixia, Guo Feng, Han Haipeng.
Effect of chromium transition layer on interface bonding strength between chromium nitride film and magnesium alloy substrate
[J]. Heat Treatment of Metals, 2021, 46(1): 143-148.
|
| [7] |
Cui Jing, Guo Yuzhu, Pang Ming, Yang Guangfeng.
Defect analysis and mechanical properties of supersonic plasma sprayed ZrO2 coating
[J]. Heat Treatment of Metals, 2020, 45(8): 216-221.
|
| [8] |
Chen Shengchuan, Cai Guoshuai, Zhu Baohui, Ma Le, Wang Lu.
Effects of diffusion annealing and hot rolling temperature on Ti-Cu interfacial bonding strength
[J]. HTM, 2020, 45(1): 126-129.
|
| [9] |
Kong Yonghua,Li Sibei,Zhou Jianglong,Zhu Shigeng.
Effect of austempering process parameters on microstructure and wear resistance of GCr15 steel spinning rings
[J]. HTM, 2016, 41(7): 95-99.
|
| [10] |
Guo Yan, Li Taijiang, Li wei, Wang Caixia .
Microstructure and properties of TiCrAlSiCN coating
[J]. HTM, 2016, 41(11): 16-20.
|
| [11] |
Niu Yonghui1，Yang Jun1，Zhu Langtao2，Yang Jianfeng3，Bai Yu3.
Microstructure and abrasive resistance of ZrO2-MoSi2 coatings deposited by supersonic plasma spraying
[J]. HTM, 2015, 40(8): 83-87.
|
| [12] |
Feng Jun1, 2, Shen Liru1, Jin Fanya1, Dan Min1, Chen Meiyan1, Tong Honghui1, Lai Xinchun3.
Effects of vacuum heat treatment on phase structure and properties of sputtered aluminum coating on 316L stainless steel
[J]. HTM, 2015, 40(8): 138-141.
|
| [13] |
Li Nannan1, Li Guolu1, Wang Haidou2, Kang Jiajie3.
Research progress in contact fatigue failure of supersonic plasma spraying coating
[J]. HTM, 2015, 40(4): 174-180.
|
| [14] |
Zhang Xiaojun，Li Long，Zhou Dejing.
Annealing process of Al-steel clad strips bonded by cold rolling
[J]. HTM, 2015, 40(10): 72-75.
|
| [15] |
Xie Fei, Wang Dan, Wu Ming, Zhang Kangnan, Yang Xu, Sun Dongxu.
Effect of environment factors on corrosion electrochemical behavior of X80 steel welded joint
[J]. HTM, 2015, 40(10): 200-204.
|
