| [1] |
Fang Xiurong, Liu Liu, Xu Huihui, Gao Yang.
Effect of pre-heat treatment before carburizing on distortion of gear shaft made of 17CrNiMo6 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 113-118.
|
| [2] |
Lu Rui, Ke Wenmin, Kuang Qiao, Rao Liangbin, Ding Qi, Lu Jinxiang.
Heat treatment distortion control of aero-engine output shaft made of 16Ni3CrMoE steel
[J]. Heat Treatment of Metals, 2022, 47(2): 168-172.
|
| [3] |
Yan Chunlian, Ju Xinhua, Yao Wugang, Jia Huiping, Wen Juan.
Determination of decarburization depth of steels by EPMA mapping analysis method
[J]. Heat Treatment of Metals, 2021, 46(5): 242-247.
|
| [4] |
Huang Xin, Zhou Jiguang, Fang Zhixiao, Wu Wei, Wen Yonghong.
Fracture cause analysis of 30CrMnSiA steel bolt for motor fixing
[J]. Heat Treatment of Metals, 2021, 46(5): 253-258.
|
| [5] |
Zhu Ke, Li Qiang, Zeng Jianmin, Zhao Siyong, Huang Zhaomin, Hu Yongmei.
Decarburization behavior of ZGMn13Cr2 steel during water toughening treatment
[J]. Heat Treatment of Metals, 2021, 46(4): 205-209.
|
| [6] |
Chen Bo, Wei Huanjun, Geng Zhiyu, Hua Yongxing, Zhang Jiguo, Xue Liqiang, Bi Yanlei.
Analysis on factors affecting decarburization of hot forming steel
[J]. Heat Treatment of Metals, 2021, 46(2): 161-167.
|
| [7] |
Qiao Da, Bian Xiangde, Fu Jinglun, Ding Linchao, Wang Tong, Lu Wenlin.
Fluid-thermal-solid coupling simulation analysis of thermohydrogen treatment furnace specially for large aviation components
[J]. Heat Treatment of Metals, 2021, 46(1): 214-219.
|
| [8] |
Zhang Leitao, Zhang Hongxing, Liu Dexin, Zhang Weiqiang, Wang Xuesong, Dai Jiaoyan, Xu Jinfu.
Research progress on causes and control of cracks in laser clad composite coatings
[J]. Heat Treatment of Metals, 2020, 45(8): 233-239.
|
| [9] |
Du Peixuan1,2, Liang Yilong1,2, Lei Lei1,2, Jiang Yun1,2,Yang Ming1,2.
Failure analysis of HXD3B primary spring used in locomotive
[J]. HTM, 2016, 41(8): 189-192.
|
| [10] |
Kong Dequn1,2, Liu Qingsuo1, Ren Zheng2, Liu Zhihao3.
Oxidation analysis of carburized and hardened 18CrNiMo7-6 gear shaft
[J]. HTM, 2016, 41(7): 182-186.
|
| [11] |
Jiang Rusong1, Liao Yonghong2.
Quenching crack analysis and counter measures of 40CrMnMo steel single pump body
[J]. HTM, 2016, 41(12): 187-191.
|
| [12] |
Song Jinying, Qi Xiangyu, Chen Liansheng, Tian Yaqiang, Zhang Jianyang.
Cause analysis of fractured40Mn steel chain and optimizing counter measures
[J]. HTM, 2015, 40(9): 209-214.
|
| [13] |
Li Fangpo1, 2, Wang Yong1.
Effect of surface decarburization on S135 drill pipe’s service property
[J]. HTM, 2015, 40(7): 164-167.
|
| [14] |
Zhang Liang，Luo Jinheng，Li Jinfeng，Dong Baosheng.
Failure analysis of a leak flange
[J]. HTM, 2015, 40(4): 201-204.
|
| [15] |
Zhang Xinming1, Feng Jijun1, Lu Liulin1, Wu Yang2, Guo Wenfang1, Liu Sheng1, Zhao Jiaqi1.
Leaf spring fracture analysis of skylight spring clip for automobile
[J]. HTM, 2015, 40(2): 204-208.
|
