| [1] |
Li Tianfu, Qu Shen, Dong Chen, Zhang Zhefeng.
Failure analysis on spindle bearing of numerical control machine tool
[J]. Heat Treatment of Metals, 2022, 47(4): 258-262.
|
| [2] |
Nie Xiaolong, Gao Jiaqiang, Meng Kairen, Wang Junyi, Liu Xinkuan.
Fracture failure analysis of 60Si2Mn spring steel
[J]. Heat Treatment of Metals, 2021, 46(8): 246-249.
|
| [3] |
Zhao Xin'e.
Cracking analysis of 8418 steel barrel used for aluminum-melting
[J]. Heat Treatment of Metals, 2021, 46(6): 236-239.
|
| [4] |
Gao Zhiyu, He Wei, Jing Xiukun, Fan Xianjin, Wang Yingxin, Bai Jiang, Wang Daliang.
Failure analysis and heat treatment process optimization of Cr12MoV steel blanking die
[J]. Heat Treatment of Metals, 2021, 46(3): 206-212.
|
| [5] |
Li Jiahua, Li Ping, Sun Song, Xie Hui, Zeng Yin.
Fracture failure analysis of stainless steel tie rod joint
[J]. Heat Treatment of Metals, 2021, 46(3): 218-222.
|
| [6] |
Yu Haihua, Yan Haiyan, Zhang Jingtong, Wang Yukui, Huang Zhiyong, Wu Jianxin, Wei Zhenwei.
Failure analysis of 30CrMnSiA steel countersunk bolt
[J]. Heat Treatment of Metals, 2021, 46(3): 223-228.
|
| [7] |
Cheng Yuan, Hu Fangzhong, Hu Naiyue, Wang Kaizhong, Wang Lianglin, Jin Guozhong, Hao Zhenyu.
Failure analysis of driving bevel gear of heavy truck rear axle
[J]. Heat Treatment of Metals, 2021, 46(2): 218-222.
|
| [8] |
Meng Xinpei, Jin Linkui, Lin Quan, Huang Yihao, Fang Manting, Li Xiaohui, He Ping.
Failure analysis of pitting on working surface of die-casting mold made of 8407 steel
[J]. Heat Treatment of Metals, 2021, 46(12): 289-293.
|
| [9] |
Kang Zhenwei, Zhou Genshu, Liu Lijun, Zhang Xiaoke, Wang Mengjie.
Failure analysis of compressor impeller blade made of 17-4PH stainless steel
[J]. Heat Treatment of Metals, 2021, 46(11): 254-257.
|
| [10] |
He Liangliang, Wang Yuandong, Wang Mengmeng, Hou Shengwen, Wang Yan.
Failure analysis of gear fracture cracking during bench test
[J]. Heat Treatment of Metals, 2021, 46(1): 235-238.
|
| [11] |
Jiang Qingbin, Zhang Zuozhi, Zhu Zhengwei, Zhou Yunjie.
Failure analysis and improvement measures of quenched and tempered crack on42CrMoA steel pin shaft
[J]. Heat Treatment of Metals, 2020, 45(9): 244-247.
|
| [12] |
Cong Jianchen, Yu Xiaodong, Ma Mingzhu, Wu Yongchen, Zhang Huadong.
Failure cause analysis of crankshaft blank in cold straightening process
[J]. Heat Treatment of Metals, 2020, 45(7): 224-227.
|
| [13] |
Li Jun, Huang Jian, Jia Tao.
Effect of initial microstructure on austenite transformation and grain growth behavior of 20CrMnTi steel during pseudo-carburizing process
[J]. Heat Treatment of Metals, 2020, 45(6): 157-162.
|
| [14] |
Pan Shumin, Wang Xiaohai, Liu Guoqiang, Xiang Hongyan, Yu Dawei, Yu Qingfeng.
Fracture failure analysis on shaft of torque gauge in heavy duty vehicles
[J]. Heat Treatment of Metals, 2020, 45(5): 257-261.
|
| [15] |
Qiao Jingqian, Feng Wei.
Isothermal phase transformation behavior analysis and kinetic model establishment for 20CrMnTi steel
[J]. Heat Treatment of Metals, 2020, 45(11): 115-120.
|
