| [1] |
Yang Yuchuan, Li Wei, Xiong Yong.
Analysis of fracture cause of 1Cr17Ni2 steel small shaft of control box
[J]. Heat Treatment of Metals, 2022, 47(3): 261-265.
|
| [2] |
Zhang Hongliang, Feng Guanghong, Wang Baoshan.
Strengthening mechanism of Nb(C, N) precipitation and controlled cooling process optimization of Nb-containing steel bars under direct rolling condition
[J]. Heat Treatment of Metals, 2021, 46(8): 133-138.
|
| [3] |
Peng Ningqi, He Hang, Luo Deng, Fan Ming, Li Zhongping.
Production process of high strength and toughness weather-resistant bridge steel Q500qENH
[J]. Heat Treatment of Metals, 2021, 46(8): 139-143.
|
| [4] |
He Li.
Vacuum heat treatment of 0Cr17Ni4Cu4Nb stainless steel base
[J]. Heat Treatment of Metals, 2021, 46(8): 189-191.
|
| [5] |
Wei Xinhong, Li Zhimin, Zhang Xu, He Wenchao, Wang Yongheng, Guo Han, Li Shaohong.
Research progress of BL/M and AR/M multiphase controlling methods in martensitic steel and their influence on performance
[J]. Heat Treatment of Metals, 2021, 46(7): 72-78.
|
| [6] |
Zhang Xing, Song Zhigang, Hou Mingshan, Li Hongwei, Dong Jiliang, Gao Xiaoyao.
TMCP process of HSLA steel produced by FTSR technology
[J]. Heat Treatment of Metals, 2021, 46(5): 160-165.
|
| [7] |
Wang Sicheng, Zhou Dan, Chai Xiyang, Tong Shi, Yang Yang, Wang Tianqi.
Effect of controlled rolling and controlled cooling process on microstructure and properties of 440 MPa grade hull steel
[J]. Heat Treatment of Metals, 2021, 46(4): 138-142.
|
| [8] |
Hu Linzhuang, Guo Hao, Lei Jianzhong, Liu Yang, Du Sanming, Zhang Yongzhen.
Influence of controlled forging and cooling process on microstructure evolution of GCr15 bearing steel
[J]. Heat Treatment of Metals, 2020, 45(9): 134-138.
|
| [9] |
Chen Xuyang, Cong Peiwu, Fan Lei, Wang Tong.
Calculation and verification of vacuum low pressure carburizing process based on saturation adjustment method
[J]. Heat Treatment of Metals, 2020, 45(9): 233-236.
|
| [10] |
He Longxiang, Yin Chengkun, Xu Yueming, Cong Peiwu, Liu Junxiang.
Design and application of high precision temperature control system for vacuum low-pressure carburizing furnace
[J]. Heat Treatment of Metals, 2020, 45(8): 249-253.
|
| [11] |
Zheng Lili, Peng Jun, An Shengli, Zhang Fang, Peng Jihua, Li Junping, Jiao Haidong.
Research status and development prospect of steels for shovel teeth at home and abroad
[J]. Heat Treatment of Metals, 2020, 45(5): 229-235.
|
| [12] |
Liu Jianfeng, Dong Fujun, Ge Qilu, Qiu Shengtao.
Effect of rolling process on microstructure and properties of 14Cr1MoR steel plate
[J]. Heat Treatment of Metals, 2020, 45(4): 115-119.
|
| [13] |
Luo Ping, Shi Yiqing, Li Xianjun, Zhang Wenliang, Zhou Tong, Sun Meng.
Development of non-standard immersion quenching equipment for aluminum parts
[J]. Heat Treatment of Metals, 2020, 45(4): 236-241.
|
| [14] |
Li Weilong, Yang Xiaojun, Zeng Fanzheng.
Development of SCM435 cold heading bainitic steel wire rod
[J]. HTM, 2020, 45(3): 217-219.
|
| [15] |
Song Kangjie, Zhao Xunfeng, Feng Zhiguo, Liu Jing.
High-frequency vacuum electromagnetic induction pulse carburizing and its application
[J]. HTM, 2020, 45(3): 242-246.
|
