| [1] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [2] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [3] |
Chen Gang, Luo Xiaobing, Chai Feng, Yang Caifu, Zhang Zhengyan, Yang Li.
Influence of rolling heating temperature on microstructure and impact property of a high strength low alloy steel
[J]. Heat Treatment of Metals, 2022, 47(4): 116-121.
|
| [4] |
Li Li, Zeng Yan, Wu Xiaochun.
Heat treatment process optimization for 4Cr5Mo2VCo steel
[J]. Heat Treatment of Metals, 2022, 47(4): 133-140.
|
| [5] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [6] |
Liu Naiyu, Cao Lei, Zheng Shaomei.
Mechanical properties of CrCN coatings at different deposition temperatures
[J]. Heat Treatment of Metals, 2022, 47(4): 240-244.
|
| [7] |
Shi Haifang, Li Qiang.
Effect of carbon content on microstructure and properties of Al0.5Co0.5NiCrFe high-entropy alloy coating
[J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
|
| [8] |
Luo Diqiang, Yu Yinhong, Zhang Zhenming, Feng Xiaoming, Liu Min, Lai Chaobin.
Effect of yttrium-based rare earth on inclusions and cryogenic temperature impact property of high strength shipbuilding steel
[J]. Heat Treatment of Metals, 2022, 47(3): 142-146.
|
| [9] |
Wu Yingfei, Sun Zhonghua, Wang Yufei, Wang Chengming, Zhang Yunfei, Peng Huifen.
Effect of homogenizing on microstructure and properties of Invar alloy ingot
[J]. Heat Treatment of Metals, 2022, 47(2): 130-136.
|
| [10] |
Ding Tao, Zhang Yunhua, Li Junjie, Liu Jin, Liu Yan.
Research status and prospect of laser cladding technology on stainless steel surface
[J]. Heat Treatment of Metals, 2022, 47(2): 205-212.
|
| [11] |
Sun Dingbang, Wang Yongsheng, Gao Jie, He Zhiyong, Wu Yanxia, Zhou Bing, Ma Yong, Yu Shengwang.
Effect of plasma surface metallizing Nb on diffusion welding performance of γ-TiAl alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 213-218.
|
| [12] |
Liu Liping.
Microstructure and reflectivity of Cr/AlCr(Si)N coating for sensors
[J]. Heat Treatment of Metals, 2022, 47(2): 224-228.
|
| [13] |
Gao Yongwang, Kong Xiangling, Li Pengming, Liu Yue.
Effect of discharge temperature during annealing at 750 ℃ on microstructure and properties of QT450-10 nodular cast iron
[J]. Heat Treatment of Metals, 2022, 47(1): 261-265.
|
| [14] |
Chen Mingxuan, Ma Qiang, Meng Junsheng, Li Chengshuo, Shi Xiaoping.
Research progress of high-entropy alloy coating
[J]. Heat Treatment of Metals, 2021, 46(9): 7-14.
|
| [15] |
Yan Tinglin, Gao Xiaoli, Wang Jiyuan.
Research progress of electrodeposited Ni-Fe alloy coating
[J]. Heat Treatment of Metals, 2021, 46(9): 15-20.
|
