[1] |
Chen Baoan, Zhang Jingyuan, Zhu Zhixiang, Han Yu, Pan Xuedong, Zhang Lei, Chen Suhong.
Effect of chemical composition on microstructure and properties of high strength Al-Mg-Si alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 30-38.
|
[2] |
Su Yong, Wang Shuai, Wang Jixing, Yu Xingfu, Liu Hongxiu, Liu Jinling.
Effect of compound chemical heat treatment on microstructure and hardness of G13Cr4Mo4Ni4V steel
[J]. Heat Treatment of Metals, 2022, 47(4): 226-230.
|
[3] |
Min Xudong, Huang Yuanchun, Xiao Zhengbing, Liu Yu, Ren Xianwei, Zou Ti.
Effect of pre-treatment on microstructure and intergranular corrosion behavior of Al-Mg-Si alloy for automobile
[J]. Heat Treatment of Metals, 2022, 47(2): 78-85.
|
[4] |
Li Liangjun, Zhang Jiamin, Chi Hongxiao, Zhou Jian.
Effect of Co microalloying on microstructure and properties of M2 high speed steel
[J]. Heat Treatment of Metals, 2022, 47(1): 73-78.
|
[5] |
Ping Zhaofu, Zhou Yi, Zheng Baochao, Tu Xiaohui, Li Wei.
Effect of heat treatment on microstructure and hardness of ZCPC-BTMCr20 high chromium cast iron
[J]. Heat Treatment of Metals, 2021, 46(9): 95-103.
|
[6] |
Yu Hongjun, Song Chuansongxin, Cheng Fuchao, Gao Zhizhe, Chen Xiaoyan, Wang Yongjin, Zhang Yingchao.
Microstructure and properties of a hypoeutectic high-Cr cast iron under different heat treatment conditions
[J]. Heat Treatment of Metals, 2021, 46(8): 56-60.
|
[7] |
Xu Chen, Chen Guangxing, Zhang Yongwei, Tan Fei, Xu Xiaochang.
Microstructure and mechanical properties of 1.25Cr-0.5Mo steel after heat treatment
[J]. Heat Treatment of Metals, 2021, 46(6): 200-204.
|
[8] |
Ma Changwen, Ma Longteng, Wang Yanfeng, Yang Yongda, Han Chengliang.
Effect of final cooling temperature on microstructure and mechanical properties of low yield ratio composite precipitation strengthening steel
[J]. Heat Treatment of Metals, 2021, 46(4): 131-137.
|
[9] |
Huang Huanchao, Liu Meijuan, Sun Ming, Jiang peng.
Microstructure and properties of V-Ti-Ni alloy for hydrogen separation treated by electroplastic rolling
[J]. Heat Treatment of Metals, 2021, 46(3): 153-158.
|
[10] |
Chen Qingyin, Sheng Yehong, Li Rui, Hou Jiapeng, Wang Qiang, Zhang Zhefeng.
Evolution law and mechanisms of electrical conductivity of Al-Mg-Si alloy wire
[J]. Heat Treatment of Metals, 2021, 46(3): 175-179.
|
[11] |
Du Xinglin, Ju Quan, Ma Huiping, Du Jinhui.
Precipitation behavior of M23C6 type carbides in GH3230 alloy
[J]. Heat Treatment of Metals, 2021, 46(2): 50-54.
|
[12] |
Sun Liguo, Zhou Jian, Ma Dangshen, Chi Hongxiao.
Effect of solution pretreatment after forging on annealed microstructure and impact property of H13 steel
[J]. Heat Treatment of Metals, 2021, 46(2): 130-135.
|
[13] |
Liu Wei, Liu Wei, Zou Wenjie, Wu Yuanzhi, Deng Bin, Liu Anmin, Ye Tuo.
Hot compression mechanical behavior and microstructure of Al-Mg-Si alloy with different heat treatment
[J]. Heat Treatment of Metals, 2021, 46(2): 168-172.
|
[14] |
Gao Shi, Pan Xuefu.
Effect of Nb on microstructure and properties of medium-low carbon super-bainitic steel
[J]. Heat Treatment of Metals, 2021, 46(12): 124-129.
|
[15] |
Zhang Xu, He Wenchao, Wei Xinhong, Li Jun, Guo Han, Li Shaohong.
Effect of cryogenic treatment on microstructure and thermal fatigue properties of H13 steel
[J]. Heat Treatment of Metals, 2021, 46(10): 81-85.
|