| [1] |
Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui.
Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel
[J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
|
| [2] |
Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong.
Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel
[J]. Heat Treatment of Metals, 2022, 47(4): 122-127.
|
| [3] |
Zhang Ning, Gao Xing, Wang Zhilin, Jiang Bo, Liu Yazheng.
Analysis of abnormal microstructure and properties of 18CrNiMo7-6 steel gear
[J]. Heat Treatment of Metals, 2022, 47(4): 268-273.
|
| [4] |
Pang Qinghai, Lang Qingbin, He Chunjing, Wang Jiuhua, Yuan Yasha.
Phase transformation and mechanical properties of 5Cr2NiMoVSi die steel
[J]. Heat Treatment of Metals, 2022, 47(3): 186-190.
|
| [5] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [6] |
Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu.
Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni
[J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
|
| [7] |
Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin.
Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel
[J]. Heat Treatment of Metals, 2021, 46(9): 133-137.
|
| [8] |
Liu Jingbao, Tian Xiugang, Zhang Jie, Wei Huanjun, Yang Lina, Wang Zhao, Li Mengxing.
Microstructure and properties of a low-cost 800 MPa galvanized ultra-high strength dual-phase steel
[J]. Heat Treatment of Metals, 2021, 46(8): 73-76.
|
| [9] |
Zhao Yanglei, Wang Lingshui, Qiu Shengwen, Dong Shengchao, Chen Liyang.
Change of microstructure and properties of 60Si2Mn spring steel during annealing
[J]. Heat Treatment of Metals, 2021, 46(8): 180-183.
|
| [10] |
Zhang Mei, Sun Guosheng, Qin Dongyang, Du Linxiu.
Behavior of martensite reverse transformation and austenite recrystallization of cold-rolled 304 stainless steel
[J]. Heat Treatment of Metals, 2021, 46(7): 51-55.
|
| [11] |
Wei Xinhong, Li Zhimin, Zhang Xu, He Wenchao, Wang Yongheng, Guo Han, Li Shaohong.
Research progress of BL/M and AR/M multiphase controlling methods in martensitic steel and their influence on performance
[J]. Heat Treatment of Metals, 2021, 46(7): 72-78.
|
| [12] |
Huo Xiwei.
Effect of Cr on dynamic CCT curves and properties of 20MnSiV gantry steel
[J]. Heat Treatment of Metals, 2021, 46(7): 89-93.
|
| [13] |
Shi Wei, E Xin, Wang Yanlong , Liu Limei, Yong Hongtuanhua, Zhang Ping.
Effect of low-temperature stress relief annealing on corrosion resistance of 316L stainless steel cold stamping corrugated plate for plate heat exchanger
[J]. Heat Treatment of Metals, 2021, 46(7): 140-143.
|
| [14] |
Li Mengge, Cheng Juqiang, Yin Sibo.
Effect of heat treatment and cooling process on microstructure and properties of bainitic steel tie-rods
[J]. Heat Treatment of Metals, 2021, 46(7): 178-181.
|
| [15] |
Li Canming.
Effect of quenching on microstructure and properties of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(6): 69-73.
|
