| [1] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [2] |
Ding Xuan, Gan Yurong, Zhang Chunju, Wang Liqiang, Yang Mingqiu, Li Hui.
Effect of intermediate annealing on microstructure and properties of 6016 aluminum alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 174-179.
|
| [3] |
Wang Zhao, Liu Jingbao, Du Mingshan, Sun Xu, Yang Lina, Li Mengxing, Yang Mingwei.
Effect of cold rolling reduction ratio on microstructure and properties of 1180 MPa grade complex phase steel
[J]. Heat Treatment of Metals, 2021, 46(6): 79-81.
|
| [4] |
Chen Zhuo, Wang Chengsi, Jin Bin, Liu Jingbao, Hao Lei, Kuang Shuang, Wang Jinrong.
Multiple regulation on mechanical properties of 980 MPa cold-rolled multi-phase steel
[J]. Heat Treatment of Metals, 2021, 46(4): 157-160.
|
| [5] |
Yang Chen, Liu Yongning, Sun Junjie, Wang Hao, Zhao Ruishu.
Rapid spheroidizing annealing process of 60Si2Mn cold drawn pearlite steel wire
[J]. Heat Treatment of Metals, 2021, 46(3): 24-27.
|
| [6] |
Li Zhiming, Li Chunming, Qin Fenghua, Hu Yinping.
Heating process analysis and system design of continuous annealing furnace for cold-rolled stainless steel
[J]. Heat Treatment of Metals, 2021, 46(3): 191-195.
|
| [7] |
Zhou Denghu, Hou Qingyu, Han Weixue, Jiang Yan, Huang Zhenyi.
Austenitization kinetic characteristics and microstructure evolution of as-cast GCr15 steel during continuous heating
[J]. Heat Treatment of Metals, 2021, 46(11): 17-23.
|
| [8] |
Yang Peiyuan, Huo Qinghui, Chen Zhuo, Zhou Wei, Wang Hongbin.
Effect of dew point on surface oxidation behavior of DP590 dual phase steel
[J]. Heat Treatment of Metals, 2021, 46(11): 97-102.
|
| [9] |
Wang Keqiang, Liu Rendong, Guo Jinyu, Fu Wei, Huang Qiuju, Sun Rongsheng.
Development of cold-rolled 800 MPa grade high strength low alloy steel for automobile
[J]. Heat Treatment of Metals, 2021, 46(1): 120-124.
|
| [10] |
Peng Xu, Bu Hengyong, Li Mengnie.
Prediction of austenitization kinetics of 5CrNiMoV steel
[J]. Heat Treatment of Metals, 2020, 45(9): 227-232.
|
| [11] |
Yang Yuanyuan, Dong Lili, Liang Shiyin.
Continuous annealing process of cold rolled high strength low alloy HC420LA
[J]. Heat Treatment of Metals, 2020, 45(8): 166-169.
|
| [12] |
Chen Zhuo, Jin Bin, Wang Chengsi, Liu Jingbao, Kuang Shuang, Liu Liping, Wang Zhao, Li Mengxing, Yang Mingwei, Wang Jinrong.
Optimization of heat treatment process of 980 MPa cold-rolling dual phase steel
[J]. Heat Treatment of Metals, 2020, 45(7): 86-89.
|
| [13] |
Zhao Haiqiang, Chen Hongye.
Formation mechanism and preventive measures of pitting defects on surface of cold rolled continuous annealing strip steel
[J]. Heat Treatment of Metals, 2020, 45(6): 236-238.
|
| [14] |
Liu Jingbao, Zhang Hongbo, Geng Zhiyu, Wei Huanjun.
Microstructure and properties of continuous annealed DP980 high strength steel
[J]. HTM, 2020, 45(2): 42-45.
|
| [15] |
Ren Zhiheng, Ren Huiping, Jin Zili, Li Wei.
Effect of continuous annealing on microstructure and properties of 440 MPa grade high strength IF steel containing lanthanum
[J]. HTM, 2020, 45(2): 76-80.
|
