| [1] |
Lu Yuhua, Wang Haizhou, Fu Rui, Li Fulin, Li Dongling, Huang Danqi, Cai Wenyi.
Behavior of γ′ precipitates under high temperature creep of GH4096 superalloy with different solution treatment cooling rates
[J]. Heat Treatment of Metals, 2021, 46(9): 173-179.
|
| [2] |
Wang Ni, Liu Xinbao, Zhu Lin, Li Bo, Quan Chen.
Analysis of transient creep behavior of P91 steel
[J]. Heat Treatment of Metals, 2021, 46(8): 20-25.
|
| [3] |
Song Yu, Guo Yan, Li Penggang, Yang Wentao.
Life assessment of 12Cr1MoV steel for high temperature superheater after long-term service
[J]. Heat Treatment of Metals, 2021, 46(7): 223-228.
|
| [4] |
Quan Chen, Liu Xinbao, Zhu Lin, Li Bo, Wang Ni.
Microstructure evolution behavior of high chromium heat-resistant steel during creep
[J]. Heat Treatment of Metals, 2021, 46(6): 135-145.
|
| [5] |
Yang Jinping, Song Guobin, Dong Yongjun, Cui Chong, Duan Wenfeng, Shi Quanqiang, Shan Yiyin.
Microstructure and properties of a gas turbine blade after long-term service
[J]. Heat Treatment of Metals, 2021, 46(6): 213-220.
|
| [6] |
Yang Hao, Si Yu, Cao Pengjun, Li Kejian.
Research status of failure mechanisms of heat-resistant steel in thermal power units
[J]. Heat Treatment of Metals, 2021, 46(5): 14-24.
|
| [7] |
Zheng Jianjun, Fan Ziming, Liu Xiao, Qiao Xin, Gao Yunpeng.
Failure analysis of fastening bolts of one steam turbine valve cover
[J]. Heat Treatment of Metals, 2021, 46(10): 262-266.
|
| [8] |
Wu Zhiguang, Gong Xueting, Li Xin, Zhao Jiqing, Han Shaoqiang, Gong Zhihua.
Effect of normalizing cooling rate on creep rupture property of 2.25Cr1Mo steel
[J]. Heat Treatment of Metals, 2020, 45(6): 55-59.
|
| [9] |
Chen Xinhao, Liu Xinyi, Li Yongxiang, Wang Wangbing, Zhang Zhichao, Wang Xu.
Microstructure and creep properties of Mg-3Al-1Si-xSr alloy
[J]. Heat Treatment of Metals, 2020, 45(6): 129-135.
|
| [10] |
Fan Deliang, Wang Zhiwu, Ju Guangyu.
Microstructure and properties of P91 steel pipeline in abnormal low hardness parts
[J]. HTM, 2020, 45(3): 1-6.
|
| [11] |
Guo Miao, Ding Xinming, Ning Yanting, Sun Wei.
Room temperature creep characteristics of a high strength steel with extremely high yield ratio
[J]. HTM, 2020, 45(3): 25-29.
|
| [12] |
Chen Zhengzong, Liu Zhengdong, Dong Chen, Bao Hansheng, Zhang Peng, Han Kui, Gao Pei.
Stress rupture properties and microstructure characteristic of C-HRA-3 heat-resistant alloy at 850 ℃
[J]. HTM, 2020, 45(1): 135-138.
|
| [13] |
Zheng Shanhong, Guo Qiaoneng, Liu Zhiyong, Wang Mingxing.
Effect of two-stage creep-aging on mechanical properties and corrosion resistance of 7050 aluminum alloy containing Sc
[J]. HTM, 2020, 45(1): 193-198.
|
| [14] |
Ye Haoyu1, Zhou Yu2, Rao Sixian1.
Effect of creep cavity size on stress field of nickel-based alloy
[J]. HTM, 2016, 41(8): 175-178.
|
| [15] |
Han Ningning，Gu Jianfeng.
Creep behavior of Inconel 600 alloy used for nuclear power
[J]. HTM, 2016, 41(6): 1-4.
|
