| [1] |
Lian Yibo, Yang Chunlei, Wang Guodong, Song Wei.
Effect of solution treatment on microstructure of GH4080A superalloy
[J]. Heat Treatment of Metals, 2022, 47(4): 46-52.
|
| [2] |
Wang Guodi, Jing Ran, Zhang Manxue, Feng Tian, Yu Guoqing, Xie Niansuo.
Effects of cold rolling deformation and recrystallization on microstructure and properties of TC4 alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 48-52.
|
| [3] |
Wang Fangjun, Liu Yinglong, Shi Yao, Wan Hong, Liu Binbin.
Effect of isothermal annealing treatment on microstructure and properties of Inconel 625 alloy foil
[J]. Heat Treatment of Metals, 2022, 47(3): 77-81.
|
| [4] |
Zhang Shijin, Li Kai, Yi Danqing, Liu Huiqun.
Recrystallization behavior and texture evolution of cold rolled TA5 titanium alloy during annealing
[J]. Heat Treatment of Metals, 2022, 47(2): 1-8.
|
| [5] |
Hao Tianci, Wu Yonghao, Yin Shubiao, Cao Jianchun, Luo Hanyu.
Effect of Zr on static recrystallization kinetics of deformed austenite and precipitates in Ti-Mo composite microalloyed steel
[J]. Heat Treatment of Metals, 2022, 47(2): 41-47.
|
| [6] |
Li Yongshun, Xuan Weidong, Duan Fangmiao, Zhao Yujuan, Li Junjie, Wang Baojun, Ren Xingfu, Ren Zhongming.
Effect of stress on recrystallization of single crystal superalloy
[J]. Heat Treatment of Metals, 2022, 47(2): 48-52.
|
| [7] |
Shu Wei, Song Liqiang, Zhang Wei.
Effect of hot deformation on recrystallization behavior of niobium-bearing austenitic stainless steel 07Cr18Ni11Nb
[J]. Heat Treatment of Metals, 2022, 47(2): 59-64.
|
| [8] |
Feng Yundong, Zou Yuming, Ding Hua.
Effect of Ti content on recrystallization temperature and mechanical properties of IF steel
[J]. Heat Treatment of Metals, 2022, 47(2): 70-73.
|
| [9] |
Zhang Tao, Zheng Wenjie, Li Caiju.
Effect of annealing after cold drawing on mechanical properties and recrystallization process of Monel 400 alloy wire
[J]. Heat Treatment of Metals, 2022, 47(1): 56-62.
|
| [10] |
Zhuo Chengzhi, Gao Li, Gu Weihua, Yong Qilong, Lu Zhong.
Application of Nb-V microalloyed high carbon steel in steel wire for flexible flat-top card clothing
[J]. Heat Treatment of Metals, 2022, 47(1): 69-72.
|
| [11] |
Fan Hehe, Jin Zili, Ren Huiping, You Xinghua.
Recrystallization behavior during hot rolling of high Nb-Ti non-oriented silicon steel for new energy vehicle
[J]. Heat Treatment of Metals, 2022, 47(1): 88-93.
|
| [12] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [13] |
Guo Liping, He Xueqing, Yang Daijun, Huang Yuanchun, Wang Qiang.
Hot compression deformation behavior of Cu-0.5Cr-0.1Zr alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 180-186.
|
| [14] |
Jiang Yingge, Huang Jiwu, Jiang Fuqing, Xu Chenglong.
Effect of cold rolling mode and annealing temperature on microstructure and texture evolution of Al-4Cu-0.73Mg alloy
[J]. Heat Treatment of Metals, 2021, 46(9): 58-64.
|
| [15] |
Li Dongsheng, Zhao Enxu, Wang Wei, Tan Li, Zhang Junpeng, Tian Zhenyu.
High temperature constitutive model and dynamic recrystallization model of IN690 alloy
[J]. Heat Treatment of Metals, 2021, 46(8): 8-14.
|
