| [1] |
Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang.
Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel
[J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
|
| [2] |
Yue Jiahong, Meng Xuan, Yao Xiaowei, Kong Lingfei, Yang Yang, Qin Guofang.
Corrosion resistance of 40Cr steel after nitriding and oxidation treatment
[J]. Heat Treatment of Metals, 2021, 46(4): 217-219.
|
| [3] |
Cheng Yuan, Hu Fangzhong, Yang Shaopeng, Wang Kaizhong, Jin Guozhong, Chen Shijie, Wang Lianglin.
Cracking failure analysis of 40Cr steel forgings for automobile front axle
[J]. Heat Treatment of Metals, 2021, 46(12): 294-297.
|
| [4] |
Kang Xueqin, Xu Zhengmao, Lin Enbo, Chen Liang.
Effect of quenching without holding on microstructure and mechanical properties of 40Cr steel
[J]. Heat Treatment of Metals, 2020, 45(8): 105-107.
|
| [5] |
Lei Fengrong, Li Hui.
Microstructure of VC layer prepared by TD salt-bath vanadizing on 40Cr steel surface
[J]. Heat Treatment of Metals, 2020, 45(7): 177-182.
|
| [6] |
Wu Mian, Pan Lin, Zhang Liangjie, Li Peng, Yang Minhong, Ma Fei, Chen Yaping.
Microstructure and corrosion resistance of hardened layer on 40Cr steel by gas oxy-nitrocarburization
[J]. HTM, 2016, 41(5): 156-159.
|
| [7] |
Jiao Donfeng1, Jin Linkui2.
Cause analysis on median frequency quenching cracking and melting of 40Cr steel semi axle
[J]. HTM, 2016, 41(3): 210-213.
|
| [8] |
Xu Yang, Song Renbo, Yang Fuqiang, Zhang Leifeng, Zhao Chao.
Optimization of heat treatment of 40Cr steel for wire drawing machine tower axle
[J]. HTM, 2015, 40(6): 73-79.
|
| [9] |
Zhong Li, Wang Liwen, Yang Zaiqiang.
Effects of laser quenching pretreatment on microstructure and properties of 40Cr steel ion NCOS penetration layer
[J]. HTM, 2014, 39(3): 53-56.
|
