| [1] |
Chen Qiang, Chen Linfang, Yang Minghua.
High temperature carburizing process of 18CrNiMo7-6 steel in controlled atmosphere
[J]. Heat Treatment of Metals, 2022, 47(4): 231-239.
|
| [2] |
Xiong Jinsheng, Ning Jing, Su Jie, Jiang Qingwei.
Effect of quenching temperature on microstructure and properties of a low cobalt secondary hardening steel
[J]. Heat Treatment of Metals, 2022, 47(3): 92-96.
|
| [3] |
Shi Na, Liu Weiming, Liu Yonggang, Zhan Hua, Cui Lei, Pan Hongbo.
Effects of Si content and quenching temperature on microstructure and properties of Q&P steel
[J]. Heat Treatment of Metals, 2022, 47(3): 130-135.
|
| [4] |
Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu.
Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni
[J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
|
| [5] |
Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun.
Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer
[J]. Heat Treatment of Metals, 2022, 47(1): 276-280.
|
| [6] |
Jiao Yongxiang, Deng Dewei, Sun Qi, Li Tianshu, Yang Shuhua, Zhang Yong, Ma Yushan.
Influence of process parameter on laser quenching effect of 42CrMo steel
[J]. Heat Treatment of Metals, 2021, 46(11): 90-96.
|
| [7] |
Xia Xiaoyu, Xiao Jinya, Wei Hanwei, Wang Shen.
Microstructure transformation of door impact beam on induction hardening
[J]. Heat Treatment of Metals, 2021, 46(10): 212-217.
|
| [8] |
Chen Xuyang, Lu Wenlin, Du Chunhui, Wang Tong.
Numerical simulation of temperature field of parts with large aspect ratio during high pressure gas quenching process
[J]. Heat Treatment of Metals, 2021, 46(10): 242-247.
|
| [9] |
Li Yong, Zhou Xinyu.
Fault mode and fault tree analysis of WZC double chamber vacuum furnace system
[J]. Heat Treatment of Metals, 2021, 46(10): 248-251.
|
| [10] |
Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin.
Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel
[J]. Heat Treatment of Metals, 2021, 46(9): 133-137.
|
| [11] |
Xu Qihao,Yang Lilin, Xia Ming, Qin Chen, Geng Zhenyue, Jiang Yajun, Zhao Liping.
Failure analysis of 38CrMoAlA steel driveshaft
[J]. Heat Treatment of Metals, 2021, 46(9): 268-272.
|
| [12] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [13] |
He Li.
Vacuum heat treatment of 0Cr17Ni4Cu4Nb stainless steel base
[J]. Heat Treatment of Metals, 2021, 46(8): 189-191.
|
| [14] |
Wang Cheng, Guo Hongli, Sun Jian, Li Defa.
Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel
[J]. Heat Treatment of Metals, 2021, 46(6): 111-115.
|
| [15] |
Wang Lei, Ma Lu, Yang Bo, Zhang Kai, Song Yang, Wang Ye.
Cause analysis of abnormal microstructure of nodular cast iron parts after high frequency induction quenching
[J]. Heat Treatment of Metals, 2021, 46(6): 231-235.
|
