| [1] |
Chen Dongjun, Li Guangyang, Liu Gang.
Effect of aging treatment on microstructure and mechanical properties of AlSi9Cu3 HPDC aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 53-56.
|
| [2] |
Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui.
Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel
[J]. Heat Treatment of Metals, 2022, 47(4): 80-85.
|
| [3] |
Zhang Ning, Gao Xing, Wang Zhilin, Jiang Bo, Liu Yazheng.
Analysis of abnormal microstructure and properties of 18CrNiMo7-6 steel gear
[J]. Heat Treatment of Metals, 2022, 47(4): 268-273.
|
| [4] |
Li Mingxiang, Yang Ping, He Wei, Zhang Meng, Wang Wenbo.
Failure analysis of hydrogen induced delayed fracture of 50CrVA steel spring
[J]. Heat Treatment of Metals, 2022, 47(3): 257-260.
|
| [5] |
Yang Yuchuan, Li Wei, Xiong Yong.
Analysis of fracture cause of 1Cr17Ni2 steel small shaft of control box
[J]. Heat Treatment of Metals, 2022, 47(3): 261-265.
|
| [6] |
Yu Bo, Zhang Yi, Wang Zhanye, Chai Litao.
Effect of continuous annealing process on microstructure and properties of 4.5%Cr cold-rolled weathering steel
[J]. Heat Treatment of Metals, 2022, 47(2): 137-140.
|
| [7] |
Li Dejun, Gao Hua, Kong Xianglu, Yang Xiaoping, Li Ta, Dong Zhaoyuan, Zhang Xiaojia.
Failure analysis of 20 steel equal-diameter tee
[J]. Heat Treatment of Metals, 2022, 47(2): 262-266.
|
| [8] |
Zhao Xiaojun, Liang Xiao, Cai Zhenyang, Xiao Lairong.
Effect of aluminizing and oxidation treatment on microstructure and mechanical properties of CLAM steel
[J]. Heat Treatment of Metals, 2022, 47(1): 192-196.
|
| [9] |
Wu Hao, Deng Xiangtao, Li Chengru, Sui Yi, Zhang Tao, Ji Wenbo, Wang Zhaodong.
Analysis on cold bending fracture of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(9): 262-267.
|
| [10] |
Xu Qihao,Yang Lilin, Xia Ming, Qin Chen, Geng Zhenyue, Jiang Yajun, Zhao Liping.
Failure analysis of 38CrMoAlA steel driveshaft
[J]. Heat Treatment of Metals, 2021, 46(9): 268-272.
|
| [11] |
Nie Xiaolong, Gao Jiaqiang, Meng Kairen, Wang Junyi, Liu Xinkuan.
Fracture failure analysis of 60Si2Mn spring steel
[J]. Heat Treatment of Metals, 2021, 46(8): 246-249.
|
| [12] |
Wei Xinhong, Li Zhimin, Zhang Xu, He Wenchao, Wang Yongheng, Guo Han, Li Shaohong.
Research progress of BL/M and AR/M multiphase controlling methods in martensitic steel and their influence on performance
[J]. Heat Treatment of Metals, 2021, 46(7): 72-78.
|
| [13] |
Huo Xiwei.
Effect of Cr on dynamic CCT curves and properties of 20MnSiV gantry steel
[J]. Heat Treatment of Metals, 2021, 46(7): 89-93.
|
| [14] |
Li Mengge, Cheng Juqiang, Yin Sibo.
Effect of heat treatment and cooling process on microstructure and properties of bainitic steel tie-rods
[J]. Heat Treatment of Metals, 2021, 46(7): 178-181.
|
| [15] |
Song Quan, Dan Ting, Li Xiaoguang, Gao Mingsen, Cao Huihui.
Fracture cause analysis of W6Mo5Cr4V2Al high speed steel twist drill
[J]. Heat Treatment of Metals, 2021, 46(7): 229-232.
|
