| [1] |
Huang Long, Deng Xiangtao, Wang Zhaodong.
Effect of tempering temperature on microstructure and properties of particle reinforced low-alloyed wear resistant steel
[J]. Heat Treatment of Metals, 2022, 47(3): 1-6.
|
| [2] |
Fan Yang, Yang Minghua, Chen Kaimin, Sun Bingyan.
Effect of PWHT on microstructure and mechanical properties of electron beam welded joints of 31CrMoV9 steel
[J]. Heat Treatment of Metals, 2022, 47(3): 57-60.
|
| [3] |
Sun Dingbang, Wang Yongsheng, Gao Jie, He Zhiyong, Wu Yanxia, Zhou Bing, Ma Yong, Yu Shengwang.
Effect of plasma surface metallizing Nb on diffusion welding performance of γ-TiAl alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 213-218.
|
| [4] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [5] |
Li Ang, Gao Kunyuan, Wen Shengping, Huang Hui, Nie Zuoren.
Effect of cooling condition on microstructure and properties of friction stir welded joints of 5E83 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 130-134.
|
| [6] |
Qiang Fei, Wang Wen, Zhang Ting, Yang Juan, Cai Jun, Wang Kuaishe.
Microstructure of stir zone in friction stir welded joint of Al-Zn-Mg-Cu aluminum alloy thick plate
[J]. Heat Treatment of Metals, 2022, 47(1): 135-141.
|
| [7] |
Huang Juan, Huang Yuanchun, Shen Zhenyu, Li Xiangyue, Zeng Yu, Yang Gengchen.
Effect of finish rolling temperature and annealing temperature on microstructure and properties of 5052 aluminum alloy sheet
[J]. Heat Treatment of Metals, 2021, 46(9): 79-84.
|
| [8] |
Li Minna, Ma Baofei, Guo Jinming, Wu Chen, Xiao Songtao.
Heat treatment of TB8 titanium alloy with high strength and toughness
[J]. Heat Treatment of Metals, 2021, 46(9): 116-119.
|
| [9] |
Wu Hao, Deng Xiangtao, Li Chengru, Sui Yi, Zhang Tao, Ji Wenbo, Wang Zhaodong.
Analysis on cold bending fracture of wear-resistant steel NM400
[J]. Heat Treatment of Metals, 2021, 46(9): 262-267.
|
| [10] |
Lin Zhiqing, Zhang Fucheng, Ma Hua, Wang Lin, Chen Chen, Xu Ming.
Effect of FW&TMCP treatment on wear resistance of as-cast high manganese steel frog
[J]. Heat Treatment of Metals, 2021, 46(8): 92-98.
|
| [11] |
Jian Xiaojun, Cui Baowei, Huang Yanjun, Kang Taotao, Wang Ping, Song Yue, Li Weiqiang.
Effect of solution treatment temperature on mechanical and welding properties of GH4169 alloy forging
[J]. Heat Treatment of Metals, 2021, 46(8): 121-124.
|
| [12] |
Wang Jingbo, Lian Mingyang, Fu Yadi, Liu Shengxin, Huang Zhiquan, Chen Yong.
Effect of tempering temperature on HAZ microstructure and properties of CMT welded 40CrNiMo quenched and tempered steel
[J]. Heat Treatment of Metals, 2021, 46(5): 99-103.
|
| [13] |
Hua Siming, Zhang Pingze, Liu Zili.
Aging process, microstructure and properties of CuCr1 alloy contact wire
[J]. Heat Treatment of Metals, 2021, 46(5): 143-149.
|
| [14] |
Wang Sicheng, Zhou Dan, Chai Xiyang, Tong Shi, Yang Yang, Wang Tianqi.
Effect of controlled rolling and controlled cooling process on microstructure and properties of 440 MPa grade hull steel
[J]. Heat Treatment of Metals, 2021, 46(4): 138-142.
|
| [15] |
Chen Zhuo, Wang Chengsi, Jin Bin, Liu Jingbao, Hao Lei, Kuang Shuang, Wang Jinrong.
Multiple regulation on mechanical properties of 980 MPa cold-rolled multi-phase steel
[J]. Heat Treatment of Metals, 2021, 46(4): 157-160.
|
