| [1] |
Zhu Ran, Xie Dihui, Zhu Shuaiguang, Zhang Yongkang.
Effect of high frequency Nd∶YLF flat-top laser shock on surface stress and micro-deformation of TC6 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(3): 204-209.
|
| [2] |
Xia Yunzhi, Yan Jiasen, Yu Xingfu, Wei Yinghua, Yang Wenwu, Liu Yujian.
Analysis of outer ring dimension and stress variation characteristics of 8Cr4Mo4V steel bearing based on working temperature
[J]. Heat Treatment of Metals, 2022, 47(3): 245-251.
|
| [3] |
Cui Ding, Che Yongping.
Distortion control method of parts with internal spline
[J]. Heat Treatment of Metals, 2022, 47(3): 252-256.
|
| [4] |
Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li.
Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel
[J]. Heat Treatment of Metals, 2022, 47(2): 178-182.
|
| [5] |
Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu.
Effect of cryogenic treatment on surface properties of TC4 titanium alloy
[J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
|
| [6] |
Zhang Jingang, Chao Lining, Wang Qiang, Yang Xiaolong, Zhou Xinyi, Tang Jiarui.
Post weld heat treatment process to eliminate welding distortion of large structural parts
[J]. Heat Treatment of Metals, 2022, 47(2): 236-242.
|
| [7] |
Zang Yan, Wang Jianjun.
Simulation of end quenching process and prediction of hardenability of Cr-Ni-Mo gear steel
[J]. Heat Treatment of Metals, 2022, 47(2): 257-261.
|
| [8] |
Dong Shaoming, Hu Jianwen, Liang Ziyu.
Heat treatment process of 75Cr1 steel for saw blade substrate and its microstructure and mechanical properties
[J]. Heat Treatment of Metals, 2021, 46(9): 193-198.
|
| [9] |
Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong.
Effect of laser shocking on surface integrity of 690 high strength steel
[J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
|
| [10] |
Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian.
Numerical simulation and experimental verification of induction hardening of wind power inner gear ring
[J]. Heat Treatment of Metals, 2021, 46(9): 273-278.
|
| [11] |
Yu Chunpeng, Wang Liqiang, Tang Zhentao, Chen Lili.
Finite element simulation of quenching process of large aluminum alloy forgings
[J]. Heat Treatment of Metals, 2021, 46(9): 279-283.
|
| [12] |
Duan Wenfeng, Shi Quanqiang, Li Jihui, He Ling, Fan Yihao, Shao Pin, Yan Wei.
Heat treatment process and microstructure of a new SIMR tool steel
[J]. Heat Treatment of Metals, 2021, 46(8): 156-163.
|
| [13] |
Shi Keqing, Guo Fu, An Longsen, Chen Yun, Du Ziyang, Wu Meng, Xu Qinpei.
Heat treatment process of 42CrMo4 steel wind power main shaft
[J]. Heat Treatment of Metals, 2021, 46(8): 201-204.
|
| [14] |
Li Junheng, Wu Yunxin, Gong Hai.
Effect of bulging on quenching residual stress of 2219 aluminum alloy ring
[J]. Heat Treatment of Metals, 2021, 46(7): 114-119.
|
| [15] |
Duan Wenfeng, Shi Quanqiang, Li Jihui, Shen Zhuo, Zhang Fan, Shen Minggang, Shan Yiyin.
Influence of heat treatment process on microstructure and properties of a new type antibacterial tool steel
[J]. Heat Treatment of Metals, 2021, 46(7): 131-139.
|
