| [1] |
Chen Sijun , Chen Songyi, Chen Geng, Yuan Dingling, Chen Kanghua.
Effect of Mg content on microstructure and mechanical properties of 2A14 aluminum alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 86-92.
|
| [2] |
Chen Jianwen, Yuan Wufeng, Jiang Yizhou, Zhang Chen, Yi Huaqing, Gao Yiqiang.
Effect of forging heating temperature on austenite grain growth and mechanical properties of 20Cr2Ni4A steel
[J]. Heat Treatment of Metals, 2022, 47(2): 112-118.
|
| [3] |
Zhao Xin, Chen Zhengzong, Zhao Haiping.
Finite element analysis of novel martensitic heat-resistant steel G115 heavy castings
[J]. Heat Treatment of Metals, 2022, 47(2): 229-235.
|
| [4] |
Ma Yuxia, Dang Shue, Chen Huiqin.
Effect of solution treatment on microstructure and properties of Cu-Cr-Zr alloy
[J]. Heat Treatment of Metals, 2022, 47(1): 163-166.
|
| [5] |
Pan Zhongde, Zhang Pengcheng, Wu Huibin, Hu Qilong.
Effect of normalizing rolling and subsequent normalizing process on microstructure and properties of S460NL high-strength low-temperature structural steel
[J]. Heat Treatment of Metals, 2021, 46(9): 142-145.
|
| [6] |
Lu Yuhua, Wang Haizhou, Fu Rui, Li Fulin, Li Dongling, Huang Danqi, Cai Wenyi.
Behavior of γ′ precipitates under high temperature creep of GH4096 superalloy with different solution treatment cooling rates
[J]. Heat Treatment of Metals, 2021, 46(9): 173-179.
|
| [7] |
Pan Xuexin, Jiang Haichang, Feng Hui, Li Xuebin, Lu Yanren, Hu Xiaofeng, Fu Hong.
Evolution of precipitated phases in high strength and high electrical conductivity Cu-Cr-Zr alloy during aging
[J]. Heat Treatment of Metals, 2021, 46(7): 7-12.
|
| [8] |
Zhao Peilin, Liu Chao, Wu Huiliang, Zheng Li.
Effect of normalizing temperature on microstructure and low temperature toughness of 355 MPa heavy section steel for marine engineering
[J]. Heat Treatment of Metals, 2021, 46(6): 102-106.
|
| [9] |
Wang Cheng, Guo Hongli, Sun Jian, Li Defa.
Effect of quenching mode on microstructure and properties of Ti-microalloyed medium carbon steel
[J]. Heat Treatment of Metals, 2021, 46(6): 111-115.
|
| [10] |
Li Zhaoguo, Wang Ke, Ji Xianbin, Xu Bin, Wei Haixia.
Effect of tempering temperature on microstructure and properties of 00Cr13Ni5Mo super martensitic stainless steel
[J]. Heat Treatment of Metals, 2021, 46(5): 95-98.
|
| [11] |
Ding Haochen, Zhao Yanjun, Su Yuanming, Wang Xie, Nan Quanhui, Chou Cheng, Feng Yijie.
Effect of annealing holding time on microstructure and mechanical properties of 5083 aluminum alloy under ultra-rapid heating annealing
[J]. Heat Treatment of Metals, 2021, 46(4): 70-76.
|
| [12] |
Yang Bo, Sun Jian, Guo Hongli.
Effect of controlled cooling process on microstructure and properties of Ti-microalloyed medium carbon steel plate
[J]. Heat Treatment of Metals, 2021, 46(4): 118-121.
|
| [13] |
Jin Jiachun, Deng Zongji, Yang Zhen, Li Zitao, Lu Qianqian, Cui Lei, Liu Yonggang, Zhan Hua.
Effect of heating process on cold bending ability of 1800 MPa grade hot stamped steel
[J]. Heat Treatment of Metals, 2021, 46(4): 126-130.
|
| [14] |
Luo Ping, Li Xianjun, Zhang Wenliang, Wang Jin, Wu Xiaolin, Shang Yong, Shi Yuezhang.
Development of walking beam production line for isothermal normalizing of gear shaft blanks
[J]. Heat Treatment of Metals, 2021, 46(4): 243-246.
|
| [15] |
Shi Xiaoxia, Ren Huiping, Li Xiao, Wang Chao, Gong Xin.
Study on boundary of efficient quenching and tempering process of 26CrMoVNbRE steel
[J]. Heat Treatment of Metals, 2021, 46(3): 39-45.
|
