| [1] |
Zhang Ziyan, Chen Jun, Chen Xiaoya, Li Quan'an, Liu Jianxin.
Effect of solution and aging treatment on microstructure and corrosion resistance of Mg-4Sm-3Gd-0.5Zr alloy
[J]. Heat Treatment of Metals, 2022, 47(4): 10-16.
|
| [2] |
Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu.
Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel
[J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
|
| [3] |
Bai Qingqing, Zhang Zhihong, Zheng Huaibei, Wang Yinghu.
Precipitation behavior of σ phase in 2507 super duplex stainless steel
[J]. Heat Treatment of Metals, 2022, 47(4): 108-115.
|
| [4] |
Wang Qi, Wu Guangliang.
Effect of tempering temperature on microstructure and properties of 1100 MPa grade high-strength steel
[J]. Heat Treatment of Metals, 2022, 47(4): 146-150.
|
| [5] |
Li Meng, Wu Meiping, Lu Peipei , Zhao Zishuo, Miao Xiaojin.
Surface quality and corrosion resistance of MnSi2-reinforced 316L stainless steel composites fabricated by selective laser melting
[J]. Heat Treatment of Metals, 2022, 47(4): 165-170.
|
| [6] |
Chen Zhijie, Cui Tong.
Corrosion resistance of Mg-4.0Zn-2.0Sr-0.4Ca alloy composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 213-218.
|
| [7] |
Zhao Zishuo, Wu Meiping, Miao Xiaojin, Cui Chen, Gong Yuling.
Effect of laser power on microstructure and corrosion resistance of FeCoNiCrMo high-entropy alloy/graphene oxide composite coating
[J]. Heat Treatment of Metals, 2022, 47(4): 251-257.
|
| [8] |
Huang Long, Deng Xiangtao, Wang Zhaodong.
Effect of tempering temperature on microstructure and properties of particle reinforced low-alloyed wear resistant steel
[J]. Heat Treatment of Metals, 2022, 47(3): 1-6.
|
| [9] |
Luo Jiandong, Hu Yanhong, Lin Yuzhou.
Application of low temperature nitriding process with double power supplies on 316 stainless steel
[J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
|
| [10] |
Shi Haifang, Li Qiang.
Effect of carbon content on microstructure and properties of Al0.5Co0.5NiCrFe high-entropy alloy coating
[J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
|
| [11] |
Wu Fangjun, Deng Xiaoyun, Jie Xiaohua, Zheng Kaihong, Luo Zhichao.
Thermal fatigue properties of H13 and Dievar steels for hot-work die
[J]. Heat Treatment of Metals, 2022, 47(3): 165-172.
|
| [12] |
Pang Qinghai, Lang Qingbin, He Chunjing, Wang Jiuhua, Yuan Yasha.
Phase transformation and mechanical properties of 5Cr2NiMoVSi die steel
[J]. Heat Treatment of Metals, 2022, 47(3): 186-190.
|
| [13] |
Liu Tao, Wu Hongyan, Gao Xiuhua, Qin Dongyang, Du Linxiu.
Effect of intercritical tempering temperature on microstructure and mechanical properties of Fe-4Mn-1.2Cr-0.3Cu-0.6Ni medium manganese steel
[J]. Heat Treatment of Metals, 2022, 47(2): 91-98.
|
| [14] |
Hu Fangzhong, Yang Shaopeng, Jin Guozhong, Hu Naiyue, Wang Kaizhong, Yang Zhiqiang, Chen Shijie.
Effect of quenching temperature on microstructure evolution and mechanical properties of Nb microalloyed gear steel 18CrNiMo7-6
[J]. Heat Treatment of Metals, 2022, 47(2): 105-111.
|
| [15] |
Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu.
Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni
[J]. Heat Treatment of Metals, 2022, 47(2): 159-163.
|
