Analysis and countermeasures of common problems on using PAG polymer quenchant

doi:10.13251/j.issn.0254-6051.2020.01.010

Abstract

CLC Number:

TG154.4

Chen Xiyuan, Guan Wei. Analysis and countermeasures of common problems on using PAG polymer quenchant[J]. HTM, 2020, 45(1): 48-52.

[1]张晓文, 齐卫东. PAG介质替代淬火油技术的开发及应用[J]. 机械研究与应用, 2017, 30(5): 165-167.
Zhang Xiaowen, Qi Weidong. Development and application of PAG medium instead of quenching oil technology[J]. Mechanical Research and Application, 2017, 30(5): 165-167.
[2]张克俭. 淬火冷却介质及其应用技术漫谈[J]. 热处理, 2004, 19(3): 52-58.
.
Zhang Kejian. Discussion on quenching and cooling medium and its application technology[J]. Heat Treatment, 2004, 19(3): 52-58.
[3]曾广益. 淬火介质冷却曲线的判读和评价[J]. 金属热处理, 1999, 24(3): 38-42.
Zeng Guangyi. Identification and valuation for cooling curves of quenchants[J]. Heat Treatment of Metals, 1999, 24(3): 38-42.
[4]陈志宏, 吴季恂. 冷却介质性能评定方法的进展-冷却曲线的发展和应用[J]. 金属热处理, 1998, 23(6): 4-8.
Chen Zhihong, Wu Jixun. Progress in performance evaluation methods of cooling media-development and application of cooling curve[J]. Heat Treatment of Metals, 1998, 23(6): 4-8.
[5]于程歆, 刘林. 淬火冷却技术及淬火介质[M]. 辽宁: 辽宁科学技术出版社, 2010: 40.
[6]陈希原. PAG淬火剂的使用要点及典型应用实例[J]. 热处理技术与装备, 2006, 27(2): 51-55.
Chen Xiyuan. The application of PAG quenching agent and its typical application examples[J]. Heat Treatment Technology and Equipment, 2006, 27(2): 51-55.
[7]陈春怀, 周敬恩. 使用聚合物水基淬火剂出现细菌问题的原因及其对策[J]. 热加工工艺, 2001(2): 27-28.
Chen Chunhuai, Zhou Jingen. Causes and countermeasures of bacterial problems in the use of polymer water-based quenchants[J]. Hot Working Technology, 2001(2): 27-28.
[8]申谋, 马鸣图, 陈希原, 等. PAG淬火介质在车用天然气钢瓶热处理中的应用[J]. 汽车研究与开发, 1996, 11(6): 41-43.
Shen Mou, Ma Mingtu, Chen Xiyuan, et al. Application of PAG quenching medium in heat treatment of vehicle natural gas cylinders[J]. Automobile Research and Development, 1996, 11(6): 41-43.

Analysis and countermeasures of common problems on using PAG polymer quenchant

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics

Comments

[1]	Zhao Yiqi, Nie Xiaolong, Zhao Sixin, Gao Jiaqiang, Liu Xinkuan. Predicting model of gear steel hardenability based on extreme learning machine [J]. Heat Treatment of Metals, 2022, 47(3): 227-233.
[2]	Wang Jinyong, Gao Jie, Cao Hongbo, Shao Haili, Qi Xilun. Effect of environmentally friendly quenching process on microstructure and properties for thick-wall L80-13Cr steel pipe [J]. Heat Treatment of Metals, 2020, 45(12): 123-127.
[3]	Zhang Taichao, Li Junkui, Yang Chunhui, Wu Qipeng. Effect of Y₂O₃ on phase stability of CoCrFeMnNi high entropy alloy after annealing [J]. HTM, 2019, 44(1): 195-204.
[4]	Ding Sheng, Ma Liang, Xu Renwei, Huang Xing, Gu Xiaoming. Calculation and analysis on quenching intensity of nitrate bath [J]. HTM, 2016, 41(4): 133-136.
[5]	Luo Yuyuan, Jie Xiaohua, Lu Guohui, Zhang Liuyan. Preparation and cooling characteristic of a new formula water-based quenching medium [J]. HTM, 2016, 41(2): 215-219.
[6]	Jiang Juman1, Wang Shasha1, Wang Jialiang2, Yang Xiucheng1 . Cooling characteristics and application of aqueous quenchant for high chromium cast iron [J]. HTM, 2015, 40(8): 215-216.
[7]	Zhang Luan, Gu Min, Wang Aixiang, Li Baokui, Su Xingwu. Cooling characteristics of nitrate quenching medium [J]. HTM, 2015, 40(6): 212-215.
[8]	Li Haidong, Zhu Xiaohong, Zong Guoliang, Pu Xiaodong. Study on cleaning technology of quenching oil [J]. HTM, 2014, 39(12): 70-71.