Strengthening effect of nitrogen on tin-plated steel sheet

doi:10.13251/j.issn.0254-6051.2020.03.013

Abstract

Abstract:

Content of nitrogen in solid solution and combined nitrogen in three different kinds of tin-plated sheet were studied by physiochemical phase analysis, the contribution of solution strengthening and precipitation strengthening played by nitrogen in the tin-plated sheet were also calculated according to related theory. The results show that with the total nitrogen content increasing from 0.0021% to 0.0103%, the proportion of combined nitrogen in the steel is decreased by 10.1%, but the proportion of the nitrogen in the AlN precipitation is increased by 10.7%. Nitrogen can play an important role in improving the strength of the tin-plated sheet, the yield strength of the steel can be promoted by 30 MPa with the total nitrogen content increased by 0.0082%.

Key words: tin-plated sheet, nitrogen, strengthening, solid solution, precipitation

CLC Number:

TG146.1

Sun Chaofan, Fang Yuan, Wang Yaqing, Wu Zhiguo, Pan Hongwei. Strengthening effect of nitrogen on tin-plated steel sheet[J]. HTM, 2020, 45(3): 64-67.

References

[1]柳长福. 镀锡板在食品饮料包装材料中的竞争优势[J]. 钢铁研究, 2007, 35(4): 48-50.
Liu Changfu. The competition advantage of tinplate using as packaging materials for food and drink[J]. Research on Iron and Steel, 2007, 35(4): 48-50.
[2]董瀚. 钢铁材料基础研究的评述[J]. 钢铁, 2008, 43(10): 5-11.
Dong Han. Overview on the fundamental study of steel products[J]. Iron and Steel, 2008, 43(10): 5-11.
[3]刘阳春, 傅杰, 吴华杰. 低碳铝镇静钢中AlN的沉淀析出[J]. 钢铁研究学报, 2009, 21(6): 20-23.
Liu Yangchun, Fu Jie, Wu Huajie. Precipitation of AlN in low carbon aluminum-killed steel[J]. Journal of Iron and Steel Research, 2009, 21(6): 20-23.
[4]王岩, 赵爱民, 陈银莉, 等. 卷取温度对低碳钢组织性能及AlN析出行为的影响[J]. 北京科技大学学报, 2010, 32(6): 748-752.
Wang Yan, Zhao Aimin, Chen Yinli, et al. Effect of coiling temperature on the AlN precipitation microstructure and mechanical properties of low carbon steel[J]. Journal of University of Science and Technology Beijing, 2010, 32(6): 748-752.
[5]庄栋栋, 王作成, 张建强, 等. 二相粒子对低碳铝镇静钢织构演变规律的影响[J]. 材料工程, 2012(12): 49-53.
Zhuang Dongdong, Wang Zuocheng, Zhang Jianqiang, et al. Effect of second-phase particles on texture evolution of low carbon Al-killed steel[J]. Journal of Materials Engineering, 2012(12): 49-53.
[6]向嵩, 刘国权, 李长荣, 等. 低碳钢碳氮析出物的热力学计算[J]. 北京科技大学学报, 2006, 28(9): 818-822.
Xiang Song, Liu Guoquan, Li Changrong, et al. Thermodynamic calculation of carbon nitrogen precipitates in low carbon steel[J]. Journal of University of Science and Technology Beijing, 2006, 28(9): 818-822.
[7]刘正东, 程杰锋, 董瀚, 等. 热轧带钢卷带及其冷却过程AlN沉淀析出模拟研究[J]. 钢铁, 2004, 39(3): 38-42.
Liu Zhengdong, Cheng Jiefeng, Dong Han, et al. Study on the AlN precipitation hardening simulation of hot rolled steel during coil cooling[J]. Iron and Steel, 2004, 39(3): 38-42.
[8]Massardier V, Guétaz V, Merlin J, et al. Kinetic and microstructural study of aluminium nitride precipitation in a low carbon aluminium-killed steel[J]. Materials Science and Engineering A, 2003, 355(1/2): 299-310.
[9]Hasan B M, Sathyamurthy P. Influence of nitrogen as grain refiner in low carbon and microalloyed steels[J]. Materials Science and Engineering, 2018, 314(1): 208-209.
[10]雍岐龙. 钢铁材料中的第二相[M]. 北京: 冶金工业出版社, 2006.

[1]	Liang Enpu, Xu Le, Yang Yong, Wang Maoqiu. Effects of Al and Cu additions on microstructure and mechanical properties of 40CrNi3MoV steel [J]. Heat Treatment of Metals, 2022, 47(4): 17-23.
[2]	Lü Jiesheng, Song Zhigang, He Jianguo, Feng Han, Zheng Wenjie, Zhu Yuliang. Microstructure transformation and strengthening-plasticization mechanism of S32205 duplex stainless steel after cold rolling and annealing [J]. Heat Treatment of Metals, 2022, 47(4): 141-145.
[3]	Wang Yinghu, Zheng Huaibei, Bai Qingqing, Song Lingxi, Yao Bin, Wang Liwei. Phase transformation and precipitation behavior of Cr-Mn-Ni-N high nitrogen steel for non-magnetic drilling collar during equilibrium solidification [J]. Heat Treatment of Metals, 2022, 47(3): 173-180.
[4]	Dai Yongjuan, Wu Xiangxiang, Li Jiakun, Guo Dong, Wang Bo. Effect of annealing temperature on microstructure and properties of Fe-24.38Mn-0.44C TWIP steel [J]. Heat Treatment of Metals, 2022, 47(2): 146-152.
[5]	Zeng Yu, Wu Wei, Mo Yan. Solution treatment and aging processes for a nickel-saving superalloy for automobile engine valve [J]. Heat Treatment of Metals, 2022, 47(2): 188-192.
[6]	Ma Qilin, Liu Gang, Zheng Jian, Yin Shubiao, Li Ba, Liu Qingyou. Continuous cooling transformation of austenite in Nb-V microalloyed high-grade pipeline steel [J]. Heat Treatment of Metals, 2022, 47(1): 13-18.
[7]	Wang Yinghu, Zheng Huaibei, Song Lingxi, Bai Qingqing, Yao Bin, Wang Liwei. High temperature plastic deformation behavior of 0Cr19Mn21Ni2N high nitrogen steel for non-magnetic drilling collar [J]. Heat Treatment of Metals, 2022, 47(1): 113-119.
[8]	Wang Yinghu, Zheng Huaibei, Bai Qingqing, Song Lingxi, Hu Jin, Huang Bo. High temperature mechanical properties of Mn18Cr18N high nitrogen austenitic stainless steel [J]. Heat Treatment of Metals, 2022, 47(1): 172-177.
[9]	Gong Fangyuan, Feng Hanqiu, Lang Yuping, Chen Haitao, Wang Man, Zhu Xiongming, Leng Chongyan. Effect of nitrogen and heat treatment on microstructure of 028 alloy [J]. Heat Treatment of Metals, 2021, 46(9): 36-41.
[10]	Chen Baoan, Zhu Zhixiang, Wang Ruihong, Chen Xin, Han Yu, Li Hongying, Xiao Xiang. Effect of Zr content on aging precipitation and properties of Al-Zr alloy [J]. Heat Treatment of Metals, 2021, 46(9): 47-52.
[11]	Wang Chunhua,Wang Feng , Wang Fengliang, Fang Hongjie, Yang Lijuan. Effect of multi-stage solid solution treatment on microstructure and properties of 7136-0.35La aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 124-128.
[12]	Wang Huibin, Qiu Rongchun, Chen Kui, Liu Xiangning, Hu Linsen, Hu Yunbo, Huang Junqiong. Gas nitriding process for 32Cr3MoVE steel [J]. Heat Treatment of Metals, 2021, 46(9): 153-158.
[13]	Cao Chen, Huang Chunling, Cao Yupeng, Yang Yang, Yang Cong. Effect of laser shocking on surface integrity of 690 high strength steel [J]. Heat Treatment of Metals, 2021, 46(9): 247-251.
[14]	Qu Huapeng, Wang Liubing, Wang Donghui, Wu Bingjie, Feng Hanqiu, Xu Bin, Song Danrong, Lang Yuping. High-temperature elastic-plastic characteristics and constitutive model of aging strengthened high-nickel alloy Inconel-718 [J]. Heat Treatment of Metals, 2021, 46(8): 1-7.
[15]	Wang Xiaodong, Chen Yunbo, Zuo Lingli, You Long, Chen Chong, Mao Feng, Zhang Junjia. Precipitation behavior in V-N microalloyed CrSiMn low alloy cast steel [J]. Heat Treatment of Metals, 2021, 46(8): 15-19.