High temperature friction properties of NiCoCrAlYTa-Al2O3 composite coating by atmospheric plasma spraying

doi:10.13251/j.issn.0254-6051.2020.04.041

Abstract

Abstract: NiCoCrAlYTa-Al₂O₃ composite coatings were prepared on 0Cr25Ni20 austenitic stainless steel by atmospheric plasma spraying (APS). The microstructure, phase composition, micro-hardness and high temperature(500 ℃) friction properties of the coatings were studied. The results show that the NiCoCrAlYTa-Al₂O₃ coating has typical layered microstructure and good bonding among layers. There are a large number of micropores in the coating, and the hard phase and the soft phase are dispersedly distributed, which effectively inhibits the generation and propagation of cracks during high temperature wear process. The wear resistance of the coating is significantly better than that of the austenitic stainless steel. During the high temperature wear process, oxidation products are formed on the coating surface, which actassolid lubrications. The wear failure modes of the NiCoCrAlYTa-Al₂O₃ coating are abrasive wear, fatigue wear and adhesion wear.

Key words: atmospheric plasma spraying (APS), NiCoCrAlYTa-Al₂O₃ composite coating, high temperature friction

CLC Number:

TG174.44

Liu Haijun, Gao Weimin, Tao Chong. High temperature friction properties of NiCoCrAlYTa-Al₂O₃ composite coating by atmospheric plasma spraying[J]. Heat Treatment of Metals, 2020, 45(4): 194-198.

References

[1]Li Zhiming, Qian Shiqiang, Wang Wei. Characterization and oxidation behavior of NiCoCrAlY coating fabricated by electrophoretic deposition and vacuum heat treatment[J]. Applied Surface Science, 2011, 257(10): 4616-4620.
[2]曹玉霞. 航空发动机高温固体润滑耐磨涂层的制备与性能研究[D]. 北京: 中国科学院过程工程研究所, 2012.
Cao Yuxia. Preparation and performance study on the solid lubricating and wear-resistant coatings in turbo-engine at elevated temperatures[D]. Beijing: Institute of Process Engineering, Chinese Academy of Sciences, 2012.
[3]李运初, 毛杰, 邓子谦, 等. 低温超音速火焰喷涂MCrAlY涂层的高温氧化[J]. 金属热处理, 2017, 42(6): 51-55.
Li Yunchu, Mao Jie, Deng Ziqian, et al. High temperature oxidation of MCrAlY coating prepared by low temperature high velocity oxygen-fuel spraying[J]. Heat Treatment of Metals, 2017, 42(6): 51-55.
[4]Wu Bin, Xu Binshi, Zhang Bin, et al. Preparation and properties of Ni/nano-Al₂O₃ composite coatings by automatic brush plating[J]. Surface and Coatings Technology, 2007, 201(16/17): 6933-6939.
[5]Zhao Lidong, Parco Maria, Lugscheider Erich. Wear behaviour of Al₂O₃ dispersion strengthened MCrAlY coating[J]. Surface and Coatings Technology, 2004, 184(23): 298-306.
[6]Song Chuanwang, Li Mingxi. Effect of nano-CeO₂ on the microstructure and properties of laser clad nickel-based alloy coating[J]. Laser Technology, 2006, 30(3): 228-231.
[7]曹玉霞. 大气等离子喷涂NiCoCrAlY/Al₂O₃-30%B₄C复合涂层的抗氧化性能[J]. 金属热处理, 2016, 41(3): 147-150.
Cao Yuxia. Oxidation resistance of APS NiCoCrAlY/Al₂O₃-30%B₄C composite coating[J]. Heat Treatment of Metals, 2016, 41(3): 147-150.
[8]曹玉霞. 等离子喷NiCoCrAlY/Al₂O₃-30%B₄C复合涂层的摩擦性能[J]. 材料热处理学报, 2016, 37(4): 205-209.
Cao Yuxia. Tribological properties of atmospheric plasma-sprayed NiCoCrAlY/Al₂O₃-B₄C composite coatings[J]. Transactions of Materials and Heat Treatment, 2016, 37(4): 205-209.
[9]李长青, 叶雄林, 邓智昌. 超音速等离子喷涂纳米结构Al₂O₃-13%TiO₂涂层的形成机理[J]. 金属热处理, 2016, 41(10): 71-74.
Li Changqing, Ye Xionglin, Deng Zhichang. Formation mechanism of nanostructured Al₂O₃-13%TiO₂ coating fabricated by supersonic plasma spraying[J]. Heat Treatment of Metals, 2016, 37(10): 71-74.
[10]Liang Bo, Ding Chuanxian. Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying[J]. Surface and Coatings Technology, 2005, 197(2/3): 185-192.
[11]Zhu Yingchun, Yukimura Ken, Ding Chuanxian, et al. Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying[J]. Thin Solid Films, 2001, 388(1/2): 277-282.
[12]Zhao Xiaoqin, Zhou Huidi, Chen Jianmin. Comparative study of the friction and wear behavior of plasma sprayed conventional and nano-structured WC-12%Co coatings on stainless steel[J]. Materials Science and Engineering A, 2006, 431(2): 290-297.
[13]Luo Hong, Goberman Daniel, Shaw Leon, et al. Indentation fracture behavior of plasma-sprayed nanostructured Al₂O₃-13wt.%TiO₂ coatings[J]. Materials Science and Engineering A, 2003, 346(1/2): 237-245.
[14]Zhang Hui, He Yizhu. Research progress on nano-particle reinforced metal matrix composite coatings[J]. Journal of Anhui University of Technology, 2006, 23(1): 21-25.

High temperature friction properties of NiCoCrAlYTa-Al₂O₃ composite coating by atmospheric plasma spraying

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 2

Recommended Articles

Metrics

Comments

[1]	Zhao Hang, Li Jianjun, Zheng Zhizhen, Wang Aihua, Huang Qiwen. Friction and wear performance of in-situ synthesized TiC composite strengthened coating on gray cast iron [J]. HTM, 2015, 40(8): 72-78.
[2]	Pu Shengjun1, Yang Haopeng1, Wang Hongbin1, 2, Wu Xiaochun1. High temperature friction and wear mechanism of Fe₂B monophase borided layer on the surface of H13 steel [J]. HTM, 2015, 40(12): 17-21.