An electric spark strengthening and repairing device for planar surface

doi:10.13251/j.issn.0254-6051.2020.04.050

Abstract

Abstract: An electric spark strengthening device for metal planar repairing was studied. Through SEM analysis, MM200 wear test and hardness gradient distribution analysis, the strengthened repairing layer obtained by the device is relatively complete and has a certain thickness, which greatly improves the hardness and wear resistance of the part surface.

Key words: electric spark strengthening, planar repairing, SEM image, wear resistance, microhardness

CLC Number:

TG155.5

Ge Zhihong, Deng Jing. An electric spark strengthening and repairing device for planar surface[J]. Heat Treatment of Metals, 2020, 45(4): 242-244.

References

[1]田修波, 杨士勤. 等离子体浸没离子注入技术应用与发展趋势[J]. 金属加工(热加工), 2004(9): 24-27.
[2]张平存, 银钢, 杨广亮, 等. 一种大型阀门阀杆在线修复方法[J]. 设备管理与维修, 2018(1): 33-34.
Zhang Pingcun, Yin Gang, Yang Guangliang, et al. An on-line repair method for the valve stem of large valve[J]. Plant Maintenance Engineering, 2018(1): 33-34.
[3]宋传照. 在线强制磨合修复在大型开式齿轮上的应用[J]. 设备管理与维修, 2015(6): 30-33.
Song Chuanzhao. Application of on-line forced running in repair technology on the large open gear[J]. Plant Maintenance Engineering, 2015(6): 30-33.
[4]王栋. 冶金厂大型数控车床导轨耐磨层修复工艺研究[J]. 中国金属通报, 2018(3): 98-99.
Wang Dong. Research on repairing technology of wear-resistant layer for guide rail of large CNC lathe in metallurgical plant[J]. China Metal Bulletin, 2018(3): 98-99.
[5]王建军. 无缝线路钢轨在线修复技术[J]. 国防交通工程与技术, 2012(2): 1-4.
Wang Jianjun. On-line-wear repairing techniques for continuous welded rails[J]. Traffic Engineering and Technology for National Defence, 2012(2): 1-4.
[6]辛昊, 王海涛, 高立, 等. 电火花沉积技术研究现状及其发展[J]. 热加工工艺, 2018(20): 25-29.
Xin Hao, Wang Haitao, Gao Li, et al. Research status and development of electro-spark deposition technology[J]. Hot Working Technology, 2018(20): 25-29.
[7]王钊, 陈荐, 何建军, 等. 转子材料电火花表面强化技术研究[J]. 失效分析与预防, 2008(4): 60-65.
Wang Zhao, Chen Jian, He Jianjun, et al. Electro-spark surface strengthening technology for rotor materials[J]. Failure Analysis and Prevention, 2008(4): 60-65.
[8]张中伟, 吴立辉, 贾顺. 电火花加工过程能耗特性研究综述[J]. 制造技术与机床, 2020(1): 38-44.
Zhang Zhongwei, Wu Lihui, Jia Shun. A review of energy consumption characteristics in electrical discharge machining process[J]. Manufacturing Technology and Machine Tool, 2020(1): 38-44.
[9]闫纲. 激光熔覆和电火花沉积复合涂层的组织和性能研究[J]. 铸造技术, 2014(3): 517-519.
Yan Gang. Study on microstructure and properties of compound coating by laser cladding and electrospark depositions[J]. Foundry Technology, 2014(3): 517-519.

[1]	Shi Mingxiao, Wang Xiongdong, Li Jingyong, Yang Zhidong, Mao Weidong, Ni Huifeng. Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing [J]. Heat Treatment of Metals, 2022, 47(4): 245-250.
[2]	Luo Jiandong, Hu Yanhong, Lin Yuzhou. Application of low temperature nitriding process with double power supplies on 316 stainless steel [J]. Heat Treatment of Metals, 2022, 47(3): 7-13.
[3]	Wang Jingyuan, Wu Songquan, Zhang Bohua, Xin Shewei, Yang Yi, Wang Hao, Huang Aijun. Effects of solution treatment and aging on microstructure and hardness of BT25y titanium alloy [J]. Heat Treatment of Metals, 2022, 47(3): 14-19.
[4]	Shi Haifang, Li Qiang. Effect of carbon content on microstructure and properties of Al_0.5Co_0.5NiCrFe high-entropy alloy coating [J]. Heat Treatment of Metals, 2022, 47(3): 136-141.
[5]	Wang Rong, Gong Yuhui, Yin Xuejun, Wei Deqiang. Effect of multi-pass electron beam scanning overlap rate on microstructure and properties of 40Cr steel [J]. Heat Treatment of Metals, 2022, 47(3): 191-197.
[6]	Zhou Zhongping, Zhang Xiaojuan, Bai Lu, Yu Fangyin, Min Yong'an. Microstructure and properties of T250 steel after plasma nitriding [J]. Heat Treatment of Metals, 2022, 47(3): 210-214.
[7]	Lin Jihui, Wen Yahui, Fan Wenbo, Zhang Teng, Liu Chenyu, Xue Yuanlin. Research progress of laser modification technology for titanium alloy surface [J]. Heat Treatment of Metals, 2022, 47(3): 215-221.
[8]	Song Yanpei, Chen Danping, Zhou Han, Lin Xiaoli, Li Li. Effect of heat treatment process on microstructure and properties of Cr15Ni2MnMoCuNbRE cast steel [J]. Heat Treatment of Metals, 2022, 47(2): 178-182.
[9]	Shi Youjie, Li Yonggang, Li Wenhui, Wang Xingfu. Effect of cryogenic treatment on surface properties of TC4 titanium alloy [J]. Heat Treatment of Metals, 2022, 47(2): 183-187.
[10]	Zhang Mengliang, Tang Wenbo, Li Baiqi, Wang Xiaosheng, Li Wenqiang, Wang Tengfei. Microstructure and properties of additional and in situ synthesized WC particle reinforced iron-based coatings prepared by plasma cladding [J]. Heat Treatment of Metals, 2022, 47(2): 200-204.
[11]	Han Xiaohu, Tian Linhai, Wang Zhenxia, Huang Tianyang, Zheng Jiasheng, Wang Juzhuang, Tang Bing, Wu Yucheng. Microstructure and properties of WTaTiVCr high-entropy alloy layer on tungsten surface [J]. Heat Treatment of Metals, 2022, 47(1): 185-191.
[12]	Lu Qingliang, Wang Jing, Qi Xiaoxia, Li Yanle, Li Fangyi. Preparation technology of laser clad Fe-based coating for shield sealing runway repair [J]. Heat Treatment of Metals, 2022, 47(1): 202-211.
[13]	Wu Bin, Wu Jinrong, Chai Hui, Li Yongkun. Effect of subcritical quenching on wear resistance of NiCrMo-3 surfacing layer [J]. Heat Treatment of Metals, 2022, 47(1): 276-280.
[14]	Ding Xuan, Gan Yurong, Jiang Aijuan, Li Hui, Yang Mingqiu. Influence of aging treatment on microstructure and properties of 7A55 aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 120-123.
[15]	Li Li, Ye Hong, Liu Yue, She Hongyan, Qu Wei, Shen Dachen, Chen Li. Microstructure and wear resistance of laser clad Ni/Ni-WC gradient coating on Cr12MoV steel [J]. Heat Treatment of Metals, 2021, 46(9): 223-228.