Heat Treatment of Metals ›› 2020, Vol. 45 ›› Issue (5): 236-242.DOI: 10.13251/j.issn.0254-6051.2020.05.045
• REVIEW • Previous Articles Next Articles
Research prospects and effect of high magnetic field on martensite transformation of steel
Wu Guanghui1,2,3,4, Hou Tingping1,2,3,4, Li Zihua1,2,3,4, Hu Feng1,2,3,4, Zhou Wen1,2,3,4, Xin Rui3, Wu Kaiming1,2,3,4
- 1. The State Key Laboratory for Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan Hubei 430081, China;
2. Hubei Key Laboratory of Metallurgical Industry Process System Science, Wuhan University of Science and Technology, Wuhan Hubei 430081, China;
3. International Research Institute for Steel Technology, Wuhan University of Science and Technology, Wuhan Hubei 430081, China;
4. Hubei Collaborative Innovation Center for Advance Steel, Wuhan University of Science and Technology, Wuhan Hubei 430081, China
-
Received:2019-11-04Online:2020-05-25Published:2020-09-02
CLC Number:
Cite this article
Wu Guanghui, Hou Tingping, Li Zihua, Hu Feng, Zhou Wen, Xin Rui, Wu Kaiming. Research prospects and effect of high magnetic field on martensite transformation of steel[J]. Heat Treatment of Metals, 2020, 45(5): 236-242.
share this article
Add to citation manager EndNote|Ris|BibTeX
URL: http://www.jsrcl.net/EN/10.13251/j.issn.0254-6051.2020.05.045
| [1]Maruyama K, Sawada K, Koike J. Strengthening mechanisms of creep resistant tempered martensitic steel[J]. ISIJ International, 2001, 41(6): 641-653. [2]Abe F. Precipitate design for creep strengthening of 9%Cr tempered martensitic steel for ultra-supercritical power plants[J]. Science and Technology of Advanced Materials, 2008, 9(1): 013002. [3]Abe F, Horiuchi T, Taneike M, et al. Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperature[J]. Materials Science and Engineering: A, 2004, 378(1/2): 299-303. [4]Kuritay, Emura S, Fujita K, et al. Effects of magnetic fields on martensitic transformation and serration of austenitic Fe-Ni and Fe-Cr-Ni steel at 4K[J]. Fusion Engineering and Design, 1993, 20(1): 445-450. [5]Liu Y R, Dong Y E, Yong Q L, et al. Effect of heat treatment on microstructure and property of Cr13 super martensitic stainless steel[J]. Journal of Iron and Steel Research International, 2011, 18(11): 60-66. [6]Kakeshita T, Saburi T, Kindo K, et al. Effect of magnetic field and hydrostatic pressure on martensitic transformation and its kinetics[J]. Japanese Journal of Applied Physics, 1997, 36(12A): 7083-7094. [7]吴业全, 罗爱辉, 徐伟力. 高强钢板材冲裁力实验研究[J]. 精密成形工程, 2018, 10(4): 151-155. Wu Yequan, Luo Aihui, Xu Weili. Experiment study on blanking force for HSS[J]. Journal of Netshape Forming Engineering, 2018, 10(4): 151-155. [8]Clarke A J, Speer J G, Matlock D K, et al. Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning[J]. Scripta Materialia, 2009, 61(2): 149-152. [9]Wang X D, Guo Z H, Rong Y H. Mechanism exploration of an ultrahigh strength steel by quenching-partitioning-tempering process[J]. Materials Science and Engineering: A, 2011, 529: 35-40. [10]Zhou S, Zhang K, Wang Y, et al. High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching- partitioning-tempering process[J]. Materials Science and Engineering: A, 2011, 528(27): 8006-8012. [11]Watanabe K, Motokawa M. Material Science in Static high Magnetic Fields[M]. Berlin: Springer, 2002: 3-10. [12]Watanabe T, Tsurekawa S, Zhao X, et al. A new challenge grain boundary engineering for advancedmaterials by magnetic field application[J]. Journal of Material Science, 2006, 41: 7747-7759. [13]Watanabe K, Awaji S, Sakuraba J, et al. 11 T liquid helium-free superconducting magnet[J]. Cryogenies, 1996, 36(12): 1019-1025. [14]Kakeshita T, Shimizu K, Funada S, et al. Composition depenence of magnetic field induced martensite transformations in Fe-Ni alloys[J]. Acta Metallurgica Sinica, 1985, 33(8): 1381-1389. [15]邢书明, 徐亚荣, 胡汉起, 等. 电场和磁场作用下的金属凝固[J]. 特种铸造及有色合金, 1998, 18(6): 37-40. Xing Shuming, Xu Yarong, Hu Hanqi, et al. The solidification of metals in electrical or magnetic field[J]. Special-cast and Non-ferrous Alloys, 1998, 18(6): 37-40. [16]王西宁, 陈 铮, 刘 兵. 磁场对材料固态相变影响的研究进展[J]. 材料导报, 2002, 16(2): 25-27. Wang Xining, Chen Zheng, Liu Bing. Effects of magnetic field on solid phase transformation[J]. Materials Review, 2002, 16(2): 25-27. [17]吴存有. 强磁场作用力对材料组织和性能的影响[D]. 大连: 大连理工大学, 2003. Wu Cunyou. Effect of high magnetic field force on the structure and properties of materials[D]. Dalian: Dalian University of Technology, 2003. [18]Sadovsky V D, Rodigin N M, Smimov L V, et al. The question of the influence of magnetic field on martensitic transformation in steel[J]. Fizika Metallov i Metallovedenie, 1961, 15(2): 302-304. [19]Herbert E G. The hardening of superhardned steel by magnetism[J]. Journal of Iron and Steel Institute, 1929, 120: 239. [20]Shimizu K, Kakeshita T. Effect of magnetic fields on martensitic transformations in ferrous alloys and steels[J]. ISIJ International, 1989, 29(2): 97-116. [21]Fukuda T, Aeda H, Yasui M, et al, Influence of magnetocrystalline anisotropy on martensitic transformation under magnetic field of single-crystalline Ni2MnGa[J]. Scripta Materialia, 2009, 60(4): 261-263. [22]Jeong S, Inoue K, Inoue S, et al, Effect of magnetic field on martensite transformation in a polycrystalline Ni2MnGa[J]. Materials Science and Engineering: A, 2003, 359(1/2): 253-260. [23]Kakeshita T, Shimizu K, Funada S, et al. Magnetic field induced martensitic transformations in disordered and ordered Fe-Pt alloys[J]. Transactins of the Japan Institute of Metals, 1984, 25(12): 837-844. [24]Satyanarayan K R, Ellaszk W, Miodownik A P. The effect of a magnetic field in the martensite transformation in steels[J]. Acta Metallurgica Sinica, 1968, 16: 877-887. [25]Schastlivtsev V M, Kaletina Y V, Fokina E A, et al, Effect of external actions and a magnetic field on martensitic transformation in steels and alloys[J]. Metal Science and Heat Treatment, 2016, 58(5/6): 247-253. [26]Kakeshita T, Shimizu K, Maki T, et al. Magnetic field-induced martensitic transformations in Fe-Ni-C invar and non-invar alloys[J]. Transactins of the Japan Institute of Metals, 1985, 26(9): 630-637. [27]Elena Pereloma, David Edmonds. Phase Sransformations in Steels[M]. English: Woodhead Publishing, 2012: 555-580. [28]宛德福, 马兴隆. 磁性物理学[M]. 北京: 电子工业出版社, 1999. [29]Hou T P, Wu K M, Liu W M, et al, Magnetism and high magnetic-field-induced stability of alloy carbides in Fe-based materials[J]. Scientific Reports, 2018, 8(1): 3049. [30]Wu G H, Hou T P, Wu K M, et al, Influence of high magnetic field on carbides and the dislocation density during tempering of high Chromium-containing steel[J]. Journal of Magnetism and Magnetic Materials, 2019, 479: 43-49. [31]徐祖耀. 马氏体相变的分类[J]. 金属学报, 1997, 33(1): 45-53. Xu Zuyao, Classification of the martensitic transformations[J]. Acta Metallurgica Sinica, 1997, 33(1): 45-53. [32]侯廷平. 强磁场条件下耐热钢中合金碳化物的析出行为[D]. 武汉: 武汉科技大学, 2012. Hou Tingping. The precipitation behavior of alloy carbides in heat resistant steels under high magnetic field[D]. Wuhan: Wuhan University of Science and Technology, 2012. [33]Kirvoglaz M, Sadovsky V D. Effect of strong magnetic fields on phase transformations[J]. Fizika Metallov i Metallovedenie, 1964, 18(4): 502-506. [34]Malinen P A, Sadovskiy V D. Effect of a magnetic field on the poc transformation in iron-nickel alloys[J]. Fizika Metallov i Metallovedenie, 1966, 21(5): 139-140. [35]Wstrin E I. Effect of a magnetic field on the martensitic transformation[J]. Fizika Metallov i Metallovedenie, 1965, 19(6): 117-120. [36]Kudryavtsev Y V, Uvarov N V, Perekos A E, et al. Effect of the temperature and magnetic field induced martensitic transformation in bulk Fe45Mn26Ga29 alloy on its electronic structure andphysical properties[J]. Intermetallics, 2019, 109: 85-90. [37]Omori T, Watanabe K, Umetsu R Y, et al. Martensitic transformation and magnetic field-induced strain in Fe-Mn-Ga shape memory alloy[J]. Applied Physics Letters, 2009, 95: 082508. [38]Kakeshita T, Furikado S, Shimizu K, et al. Magnetic fleld- induced martensitic transformation in single crystals of Fe-31.6at%Ni alloy[J]. Transactions of the Japan Institute of Metals, 1986, 27(7): 477-483. [39]Kakeshita T, Shirai H, Shimizu K, et al. Magnetic field-induced transformation from paramagnetic austenite to ferromagnetic martensite in an Fe-3.9Mn-5.0C(at%) alloy[J]. Transactions of the Japan Institute of Metals, 1987, 28(11): 891-897. [40]Kakeshita T, Shimizu K, Ono M, et al. Magnetic field-induced martensitic transfomations in a few ferrous alloys[J]. Journal of Magnetism and Magnetic Materials, 1990, 90-91: 3-36. [41]Kakeshita T, Shirai H, Shimizu K, et al. Effect of magnetic fields on martensitic transformations in alloys with a paramagnetic to antiferromagnetic transition in the austenitic state[J]. Transactions of the Japan Institute of Metals, 1988, 29(7): 553-560. [42]Kakeshita T, Takeuchi T, Fukuda T, et al. Magnetic field-induced martensitic transformation and giant magnetostriction in Fe-Ni-Co-Ti and ordered Fe3Pt shape memory alloys[J]. Materials Transactions, JIM, 2000, 41(8): 882-887. [43]Kakeshita T, Shimizu K, Maki T, et al. Magnetoelastic manensitic transfonnation in an ausaged Fe-Ni-Co-Ti alloy[J]. Scripta Metallurgica et Materialia, 1985, 19(8): 973-976. [44]Wang F, Qian D, Hua L, et al. Effect of high magnetic field on the microstructure evolution and mechanical properties of M50 bearing steel during tempering[J]. Materials Science and Engineering: A, 2020, 771, 138623. [45]Kakeshita T, Kuroiwa K, Shimizu K, et al. Effect of magnetic fields on athermal and isothermal martensitic transfornations in Fe-Ni-Mn alloys[J]. Materials Transactions, JIM, 1993, 34(5): 415-422. [46]Kakeshita T, Yamamoto T, Shimizu K, et al. Effect of static magnetic field and hydrostatic pressure on the isothermal martensitic transformation in an Fe-Ni-Mn alloys[J]. Materials Transactions, JIM, 1995, 36(8): 1018-1022. [47]San Martin D, Van Dijk N H, Jimenez-Melero E, et al. Real-time martensitic transformation kinetics in maraging steel under high magnetic fields[J]. Materials Science and Engineering: A, 2010, 527(20): 5241-5245. [48]Holmquist M, Nilsson J O, Hultin Stigenberg A. Isothermal formation of martensite in a 12Cr-9Ni-4Mo maraging stainless steel[J]. Scripta Metallurgica et Materialia, 1995, 33(9): 1367-1373. [49]San Martin D, Van Dijk N H, Bruck E, et al. The isothermal martensite formation in a maraging steel: A magnetic study[J]. Materials Science and Engineering: A, 2008, 481-482: 757-761. [50]Kohno Y, Konishi H, Shibata K, et al. Effects of reheating after solution treatment and magnetic fields on α′ martensite formation in SUS304L steel during isothermal holding at cryogenic temperature[J]. Materials Science and Engineering: A, 1999, 273-275: 333-336. [51]Kakeshita T, Fukuda T. Martensitic transformation in some ferrous and non-ferrous alloys under high magnetic field[C]//The 3th International Symposium on Electronmagnetic Processing of Materials, Nagoya: ISIJ, 2000: 584-589. [52]Shimozono T, Kohno Y, Konishi H, et al. Effects of pre-strain, heat treatments and magnetic fields on α′ martensite formation in Fe25.5%Ni3-5%Cr alloys[J]. Materials Science and Engineering: A, 1999, 272-275: 337-341. [53]Kurita Y, Emura S, Fujita K, et al. Effects of magnetic fields on martenstic transformation and serration of austenitic Fe-Ni and Fe-Cr-Ni steel at 4K[J]. Fusion Engineering and Design, 1993, 20(1): 445-450. [54]Choi J Y, Fukuda T, Kakeshita T. Effect of magnetic field on isothermal martensitic transformation in a sensitized SUS304 austenitic stainless steel[J]. Journal of Alloys and Compounds, 2013, 577(S1): 605-608. [55]Lee J, Fukuda T, Kakeshita T. Martensitic transformation behaviour in sensitized SUS304 austenitic stainless steel during isothermal holding at low temperature[J]. Journal of Physics: Conference Series, 2009, 165(1): 012058. |
| [1] | Wang Yunlong, Yu Wei, Zhang Yi, Shi Jiaxin, Li Minghui. Effect of austenitizing temperature on isothermal transformation and mechanical properties of bainite steel [J]. Heat Treatment of Metals, 2022, 47(4): 80-85. |
| [2] | Fu Xibin, Chen Zihao, Zhang Ke, Zhao Shiyu, Sun Xinjun, Zhu Zhenghai, Liang Xiaokai, Yong Qilong. Effect of quenching temperature on microstructure and mechanical properties of high Ti low alloy wear-resistant steel [J]. Heat Treatment of Metals, 2022, 47(4): 122-127. |
| [3] | Su Pengji, Ma Yonglin, Dong Lili, Yang Xuefeng. Effect of magnetic field pre-annealing on microstructure and texture of CGO steel [J]. Heat Treatment of Metals, 2022, 47(4): 128-132. |
| [4] | Chen Qiang, Chen Linfang, Yang Minghua. High temperature carburizing process of 18CrNiMo7-6 steel in controlled atmosphere [J]. Heat Treatment of Metals, 2022, 47(4): 231-239. |
| [5] | Tian Yaqiang, Cai Zhixin, Xu Haiwei, Zhang Hongjun, Han Yun, Di Guobiao, Chen Liansheng. Thermodynamics of C and Mn element partitioning during austenite reverted transformation in medium manganese steel [J]. Heat Treatment of Metals, 2022, 47(3): 159-164. |
| [6] | Wang Yinghu, Zheng Huaibei, Bai Qingqing, Song Lingxi, Yao Bin, Wang Liwei. Phase transformation and precipitation behavior of Cr-Mn-Ni-N high nitrogen steel for non-magnetic drilling collar during equilibrium solidification [J]. Heat Treatment of Metals, 2022, 47(3): 173-180. |
| [7] | Pang Qinghai, Lang Qingbin, He Chunjing, Wang Jiuhua, Yuan Yasha. Phase transformation and mechanical properties of 5Cr2NiMoVSi die steel [J]. Heat Treatment of Metals, 2022, 47(3): 186-190. |
| [8] | Chen Linheng, Tang Qibo, Wu Huibin, Zhao Jinbin, Bo Feihu. Effect of quenching process on microstructure and mechanical properties of medium manganese steel bearing Ni [J]. Heat Treatment of Metals, 2022, 47(2): 159-163. |
| [9] | Tao Sufen, Wu Hao, Sun Guilin, Chen Long, Chen Bo. Effect of Ni content on continuous cooling transformation curves of EQ70 steel for marine engineering [J]. Heat Treatment of Metals, 2022, 47(1): 100-105. |
| [10] | Du Pengju, Wu Di. Effect of prior austenite grain size on martensitic transformation in medium manganese steel [J]. Heat Treatment of Metals, 2021, 46(9): 21-27. |
| [11] | Yu Hongjun, Chen Zhengjia, Chi Xiaoming, Pei Zhongzheng, Cheng Fuchao, Xu Jie, Wang Yongjin. Effect of quenching temperature on microstructure and mechanical properties of a medium alloy martensitic wear-resistant cast steel [J]. Heat Treatment of Metals, 2021, 46(9): 133-137. |
| [12] | Shi Yazhou, Lu Guangping, Gao Yi, Liao Chengzhi, Yang Yi. Effect of pulsed magnetic field treatment on properties and microstructure of 7075 aluminum alloy [J]. Heat Treatment of Metals, 2021, 46(9): 159-163. |
| [13] | Ye Xiaofei, Zhang Wen, Mi Yanjun, Zhu Baizhi, Zhang Yusuo, Yi Liang, Huang Zhenjian. Numerical simulation and experimental verification of induction hardening of wind power inner gear ring [J]. Heat Treatment of Metals, 2021, 46(9): 273-278. |
| [14] | Tian Wei, Chang Song, Zhou Changshen, Zhang Wendi, Feng Zhihao, Sun Xinyang, Su Ru. Microstructure transformation and metallographic analysis of Ni-based wrought superalloy during heat treatment [J]. Heat Treatment of Metals, 2021, 46(8): 30-35. |
| [15] | Liu Jingbao, Tian Xiugang, Zhang Jie, Wei Huanjun, Yang Lina, Wang Zhao, Li Mengxing. Microstructure and properties of a low-cost 800 MPa galvanized ultra-high strength dual-phase steel [J]. Heat Treatment of Metals, 2021, 46(8): 73-76. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||