Effect of cold deformation on mechanical properties and earing rate of 5052 aluminum alloy sheet

doi:10.13251/j.issn.0254-6051.2022.10.035

Abstract

Abstract: Effect of cold deformation on grain size, mechanical properties and earing rate of 5052 aluminum alloy sheet was studied by metallographic microscope, tensile testing machine and earing rate tester. The results show that the yield strength of the 5052 aluminum alloy cold-rolled sheet has a linear relationship with the cold deformation rate. The change of tensile strength and yield strength caused by 10% deformation is about 20 MPa and 15 MPa, respectively. After recrystallization annealing, the grain size of the annealed sheet has a linear relationship with the cold deformation rate and yield strength. When the cold deformation rate is 50%-60%, the earing rate and plane anisotropy index Δr of the annealed sheet is smaller.

Key words: 5052 aluminum alloy, cold deformation rate, grain size, mechanical properties, earing rate

CLC Number:

TG146.2

Zeng Zhaofen, Qi Wengang, Zhao Fuyou, Kang Yuemin, Wang Xueping, Zhang Yi. Effect of cold deformation on mechanical properties and earing rate of 5052 aluminum alloy sheet[J]. Heat Treatment of Metals, 2022, 47(10): 208-210.

References

[1]崔利群, 李达人, 章耀平, 等. 罐用铝材研究进展[J]. 材料研究与应用, 2018, 12(4): 244-248.
Cui Liqun, Li Daren, Zhang Yaoping, et al. The progress of research on aluminum sheet used for cans[J]. Materials Research and Application, 2018, 12(4): 244-248.
[2]傅高升, 钱匡武, 陈文哲, 等. 罐用铝材的研究现状及存在的问题分析[J]. 材料工程, 2000(12): 35-38.
Fu Gaosheng, Qian Kuangwu, Chen Wenzhe, et al. Analyses of the current situation and existing problem in the research of aluminum sheet used for making can[J]. Journal of Materials Engineering, 2000(12): 35-38.
[3]聂祚仁, 左铁镛, 张新明, 等. 气雾制品铝罐材料研究进展与生产概况[J]. 铝加工, 1997, 20(4): 7-10.
Nie Zuoren, Zuo Tieyong, Zhang Xinming, et al. Research progress and production overview of aluminum can materials for aerosol products[J]. Aluminium Fabrication, 1997, 20(4): 7-10.
[4]张漉. 铝质气雾罐生产工艺及市场发展现状[J]. 有色金属加工, 2016(2): 13-15.
Zhang Lu. Manufacturing process and market development of aluminum aerosol can[J]. Nonferrous Metals Processing, 2016(2): 13-15.
[5]Zhao Y M, Liu W C, Morris J G. Quantitative analysis of texture evolution of cold-rolled direct-chill-cast and continuous-cast AA5052 and AA5182 aluminum alloys during isothermal annealing[J]. Metallurgical and Materials Transactions A, 2004, 35(11): 3613-3629.
[6]Sidor J, Petrov R, Kestens L. Modeling the crystallographic texture changes in aluminum alloys during recrystallization[J]. Acta Materialia, 2011, 59(14): 5735-5748.
[7]王国军. 铝及铝合金板带材织构[J]. 轻合金加工技术, 2004, 32(6): 28-33.
Wang Guojun. Deviation of random orientation distribution of aluminium and aluminium alloy sheets strips[J]. Light Alloy Fabrication Technology, 2004, 32(6): 28-33.
[8]Liu W C, Li J, Yuan H, et al. Effect of recovery on the recrystallization texture of an Al-Mg alloy[J]. Scripta Materialia, 2007, 57(9): 833-836.
[9]李雪, 杨平, 王海峰, 等. 铝合金中制耳与织构关系的衍射分析[J]. 中国体视学与图像分析, 2006(4): 246-251.
Li Xue, Yang Ping, Wang Haifeng, et al. Relationship between earring and textures in aluminum alloy determined by diffraction analyses[J]. Chinese Journal of Stereology and Image Analysis, 2006(4): 246-251.
[10]吕伟强, 卢广玺, 关绍康, 等. 中间退火对HTCR5052铝合金再结晶过程的影响[J]. 材料热处理学报, 2017, 38(6): 91-96.
Lü Weiqiang, Lu Guangxi, Guan Shaokang, et al. Effect of intermediate annealing on recrystallization of HTCR 5052 aluminum alloy[J]. Transactions of Materials and Heat Treatment, 2017, 38(6): 91-96.
[11]Engler O, Vatne H E, Nes E. The roles of oriented nucleation and oriented growth on recrystallization textures in commercial purity aluminium[J]. Materials Science and Engineering A, 1996, 205(1): 187-198.

[1]	Wang Zhiwen, Yang Rongdong, Huang Yuanchun, Li Hui. Effect of aging treatment on microstructure and mechanical properties of extruded 2195 Al-Li alloy [J]. Heat Treatment of Metals, 2022, 47(9): 6-11.
[2]	Gao Xing, Zhang Ning, Ding Yan, Jiang Bo. Effect of heat treatment time on microstructure and mechanical properties of TC4 titanium alloy fabricated by selective laser melting [J]. Heat Treatment of Metals, 2022, 47(9): 12-17.
[3]	Xia Pengzhao, Xu Ying, Cai Yanqing, Zhao Sitan, Lou Bingjie. Effect of microwave sintering process on microstructure and properties of Ti-Mg composites [J]. Heat Treatment of Metals, 2022, 47(9): 18-26.
[4]	Li Lei, Zhu Xujun, Zhang Li, Tian Fuzheng. Effect of shot peening diameter on properties and damage evolution of GH4169 alloy [J]. Heat Treatment of Metals, 2022, 47(9): 47-53.
[5]	Zhang Haoze, Wang Junsheng, Gong Penghui, Zhan Haiyi, Wang Kai. Effect of heat treatment on microstructure and mechanical properties of TC4 alloy plate directly rolled by EB ingot [J]. Heat Treatment of Metals, 2022, 47(9): 71-78.
[6]	Zhong Liwei, Feng Zhaohui, Gao Wenli, Chen Junzhou, Lu Zheng. Effects of multi-axial forging and T852 heat treatment on microstructure and mechanical properties of Al-Cu-Li alloy [J]. Heat Treatment of Metals, 2022, 47(9): 79-86.
[7]	Xiao Jieliang, Sun Hao, Li Fei, Hu Ping, Chen Jinggang, Jiang Zhaofeng. Low temperature normalizing process of nodular cast iron travel wheel [J]. Heat Treatment of Metals, 2022, 47(9): 98-102.
[8]	Wen Fangming, Hao Xiaobo, Cao Heng, Zhang Qiang, Li Bobo, Liu Yinqi. Effect of heat treatment process on microstructure and mechanical properties of N06600 alloy hot rolled plate [J]. Heat Treatment of Metals, 2022, 47(9): 113-118.
[9]	Ai Bingquan, Kuang Shuang, Tian Xiugang, Yang Feng, Wang Yuhui, Lu Zhiqiang, Wang Zhao, Hao Lei. Effect of soaking temperature on microstructure and properties of 980 MPa grade high strength steel with different chemical composition [J]. Heat Treatment of Metals, 2022, 47(9): 119-124.
[10]	Wang Shikai, Wang Rui, Kang Yan, Yu Zhiqiang, Yan Zhijie. Effect of quenching temperature on microstructure and properties of Cr5MoVNi steel [J]. Heat Treatment of Metals, 2022, 47(9): 125-129.
[11]	Xiong Weiliang, Liang Wen, Wu Teng, Liang Liang, Wu Haohong. Effect of controlled cooling process on microstructure and mechanical properties of hot-rolled dual phase steel [J]. Heat Treatment of Metals, 2022, 47(9): 130-133.
[12]	Zhang Yucheng, Jia Haomei. Effect of solution treatment on microstructure and properties of Incoloy825 alloy pipe [J]. Heat Treatment of Metals, 2022, 47(9): 134-139.
[13]	Fan Zhao, Cheng Zonghui, Zhang Zhiqiang. Effect of laser heat input on microstructure and mechanical properties of 1Cr17Ni2 stainless steel repaired by laser additive [J]. Heat Treatment of Metals, 2022, 47(9): 140-145.
[14]	Li Ying, Peng Shuang, Zhang Ting, Chai Xianghai, Weng Yiliu. Heat treatment process and mechanical properties of selective laser melted Ti-6Al-4V alloy [J]. Heat Treatment of Metals, 2022, 47(9): 175-181.
[15]	Tian Wei, Pan Wei, Zhong Qingyuan. Control of δ-ferrite content and austenite grain size in 0Cr16Ni5Mo martensite stainless steel [J]. Heat Treatment of Metals, 2022, 47(9): 194-201.