Effect of solution treatment on high temperature mechanical properties of austenitic stainless steel 07Cr18Ni11Nb

doi:10.13251/j.issn.0254-6051.2022.06.020

Abstract

Abstract: Effect of solution treatment on high temperature mechanical properties of austenitic stainless steel 07Cr18Ni11Nb was investigated. The results show that the high temperature yield strength at 500 ℃ and 600 ℃ decreases with the increase of solution treatment temperature, but the high temperature tensile strength at 500 ℃ and 600 ℃ has no obvious change. When the solution treatment temperature is ≤1100 ℃, the austenite grain size remains basically unchanged. When the solution treatment temperature is more than 1100 ℃, the austenite grain size grows gradually, and when the solution treatment temperature reaches 1200 ℃, the austenite grain size increases to over 100 μm. The austenite grain boundary is still an important factor to the strengthening effect when the tensile test is under 600 ℃. The smaller the grain size, the higher the yield strength at high temperature.

Key words: austenite stainless steel, solution treatment, high temperature mechanical properties

CLC Number:

Shu Wei, Wang Liying. Effect of solution treatment on high temperature mechanical properties of austenitic stainless steel 07Cr18Ni11Nb[J]. Heat Treatment of Metals, 2022, 47(6): 107-110.

References

[1]Vach M, Kunikova T, Domankova M, et al. Evolution of secondary phases in austenitic stainless steels during long-term exposures at 600, 650 and 800 ℃[J]. Materials Characterization, 2008, 59(12): 1792-1798.
[2]乔瑞芳, 毕洪运, 陈玉喜. Ti, Nb和W复合强化超纯铁素体不锈钢的高温析出行为[J]. 材料工程, 2016, 44(5): 22-28.
Qiao Ruifang, Bi Hongyun, Chen Yuxi. Precipitation behavior of (Ti, Nb, W)-modified ferritic stainless steel during high-temperature aging[J]. Journal of Materials Engineering, 2016, 44(5): 22-28.
[3]Okayasu M, Wu S, Noda K, et al. Mechanical properties of austenitic stainless steel with high niobium contents[J]. Materials Science and Technology, 2016, 32(13): 1382-1394.
[4]Sim G M, Ahn J C, Hong S C, et al. Effect of Nb precipitate coarsening on the high temperature strength in Nb containing ferritic stainless steels[J]. Materials Science and Engineering A, 2005, 396(1/2): 159-165.
[5]王新堂, 张金一, Du Yingang. 00Cr17Ni14Mo2不锈钢高温力学性能[J]. 建筑材料学报, 2015, 18(5): 767-772.
Wang Xintang, Zhang Jinyi, Du yingang. High temperature mechanical properties of 00Cr17Ni14Mo2 stianless steel[J]. Journal of Building Materials, 2015, 18(5): 767-772.
[6]叶晓宁, 黄俊霞. 16Cr20Ni14Si2耐热钢成分对高温力学性能的影响[J]. 宝钢技术, 2012(2): 6-9.
Ye Xiaoning, Huang Junxia. Effect of chemical composition of heat-resistant steel 16Cr20Ni14Si2 on its high-temperature mechanical properties[J]. Bao Steel Technology, 2012(2): 6-9.
[7]程园园, 李春祥, 曹黎媛. 高温下钢材力学性能研究进展[J]. 结构工程师, 2017, 33(1): 189-197.
Cheng Yuanyuan, Li Chunxiang, Cao Liyuan. Research progresss on mechanical properties of steel material at high temperature[J]. Structural Engineers, 2017, 33(1): 189-197.
[8]薛忍让, 宋志刚, 郑文杰, 等. 固溶温度对316LN不锈钢组织及力学性能的影响[J]. 金属热处理, 2013, 38(4): 88-91.
Xue Renrang, Song Zhigang, Zheng Wenjie, et al. Effect of solution temperature on microstructure and mechanical properties of 316LN stainless steel[J]. Heat Treatment of Metals, 2013, 38(4): 88-91.
[9]胡忠武, 李中奎, 殷涛, 等. Mo-Nb合金单晶的高温力学性能[J]. 稀有金属, 2010, 34(1): 48-52.
Hu Zhongwu, Li Zhongkui, Yin Tao, et al. High temperature mechanical properties of Mo-Nb alloy single crystals[J]. Chinese Journal of Rare Metals, 2010, 34(1): 48-52.

[1]	Gu Guochao, Li Ruifen, Xin Zhenmin, Xiang Lixin, Xu Wenhua, Lü Yupeng. Effect of solution temperature on mechanical properties and corrosion resistance of super duplex stainless steel 2507 [J]. Heat Treatment of Metals, 2022, 47(6): 1-6.
[2]	Wu Yang, Huang Hui, Shi Wei, Wen Shengping, Wu Xiaolan, Rong Li, Wei Wu. Effects of solution and aging treatments on mechanical properties and microstructure of Al-Cu-Mn-Er cast alloy [J]. Heat Treatment of Metals, 2022, 47(6): 7-12.
[3]	Chen Jiajun, Zhu Zhiyuan, Li Jianqiang, Wang Shouqian. Effect of solution treatment on microstructure and properties of Cr23Ni7Mo2Cu0.6 duplex stainless steel [J]. Heat Treatment of Metals, 2022, 47(6): 59-63.
[4]	Wu Wenjin, Li Xianghui, Li Xuechen, Chen Jingyang, Tang Xin. Effect of solution treatment on microstructure of carbide in K447A superalloy [J]. Heat Treatment of Metals, 2022, 47(6): 89-92.
[5]	Zhou Qiyun, Shi Zengmin, Xie Hao, Dai Lei. Effect of solution treatment on microstructure transformation and element diffusion of Fe-Cr-Ni-Al alloy [J]. Heat Treatment of Metals, 2022, 47(5): 98-104.
[6]	Chen Lichao, Wang Changxi, Su Zhicheng, Wang Yuyu, Ren Jingtao, Li Jing, Deng Ting, Zhao Liping. Effect of aging process on microstructure and mechanical properties of WE43 magnesium alloy [J]. Heat Treatment of Metals, 2022, 47(5): 208-212.
[7]	Wang Yinghu, Zheng Huaibei, Liu Tingyao, Song Lingxi, Bai Qingqing. Effect of solid solution treatment on microstructure and carbides of 53Cr21Mn9Ni4N heat-resistant steel [J]. Heat Treatment of Metals, 2022, 47(4): 39-45.
[8]	Wang Ruiqin, Ge Peng, Liao Qiang, Hou Peng, Liu Yu. Effects of solution cooling method on microstructure and properties of short-term servicing high-temperature titanium alloy plate [J]. Heat Treatment of Metals, 2022, 47(4): 196-198.
[9]	Sun Jian, Huang Zhenyi, Li Jinghui, Wang Ping. Effect of solution treatment and aging on microstructure and hardness of Fe-Mn-Al-C light weight steel [J]. Heat Treatment of Metals, 2022, 47(3): 34-38.
[10]	Cheng Tijuan, Gan Bin, Yu Hongyao, Zhou Haijing, Guo Caiyu, Bi Zhongnan, Du Jinhui. Effect of solution treatment on structure and properties of a novel nickel-based superalloy [J]. Heat Treatment of Metals, 2022, 47(3): 107-112.
[11]	Ye Tuo, Tang Ming, Liu Jizhao, Liu Wei, Wu Yuanzhi, Liu Wei, Xu Wen. Effect of solution temperature on microstructure and mechanical properties of 7075 aluminum alloy sheet [J]. Heat Treatment of Metals, 2022, 47(3): 119-123.
[12]	Zeng Yu, Wu Wei, Mo Yan. Solution treatment and aging processes for a nickel-saving superalloy for automobile engine valve [J]. Heat Treatment of Metals, 2022, 47(2): 188-192.
[13]	Qiu Xuyangfan, Yang Zhuoyue, Ding Yali. Solid solution treatment for improving cryogenic temperature toughness of Cr-Ni-Mo-Ti maraging stainless steel [J]. Heat Treatment of Metals, 2022, 47(1): 44-48.
[14]	Wang Yinghu, Zheng Huaibei, Bai Qingqing, Song Lingxi, Hu Jin, Huang Bo. High temperature mechanical properties of Mn18Cr18N high nitrogen austenitic stainless steel [J]. Heat Treatment of Metals, 2022, 47(1): 172-177.
[15]	Wang Man, Shen Qiang, Luo Youxin, Nai Qiliang, Wang Baoshun, Wu Minghua, Zhu Xiongming. Effect of solution temperature and cold deformation on microstructure and low temperature impact properties of S32750 duplex stainless steel tube [J]. Heat Treatment of Metals, 2022, 47(1): 233-238.