Design of fuzzy PID heat treatment temperature control system based on Kalman filter

doi:10.13251/j.issn.0254-6051.2023.08.038

Abstract

Abstract: Aiming at the problems of hysteresis, overshoot, easy interference and slow response of temperature control in the heat treatment process of aerospace complex casting parts, a fuzzy PID(proportional-integral-derivative) temperature control method based on Kalman filter was proposed. Particle swarm optimization (PSO) was used to optimize the parameters of PID controller, and Kalman filter was also used to filter the measurement noise. Finally, the fuzzy strategy was used to realize the rapid response and overshoot control of temperature control. Through the research of fuzzy PID control, fuzzy rules were analyzed and fuzzy reasoning was carried out. According to the requirements of heat treatment process temperature control and its reasoning rules, selecting the most suitable control factor, through the simulation comparison with MATLAB software, it is proved that the accuracy of the designed heat treatment temperature control system is greatly improved, the robustness of the system is better, the response speed is obviously improved, the overshoot is reduced, the adjustment time is shortened, and the interference is also strongly inhibited.

Key words: heat treatment, Kalman filter, particle swarm optimization, fuzzy PID, temperature control, anti-interference

CLC Number:

TG155.4

Li Guangbao, Gao Dong, Lu Yong, Ping Hao, Zhou Yuanyuan. Design of fuzzy PID heat treatment temperature control system based on Kalman filter[J]. Heat Treatment of Metals, 2023, 48(8): 235-241.

References

[1]郑旭光, 千登. 航天热处理系统用状态监控数据分发技术研究[J]. 机电工程技术, 2021, 50(6): 194-199.
Zheng Xuguang, Qian Deng. Research on condition monitoring data distribution technology for aerospace heat treatment system[J]. Electromechanical Engineering Technology, 2021, 50(6): 194-199.
[2]赵升吨, 袁建华, 郝永江. 现代高速热处理炉的特点讨论[J]. 锻造与冲压, 2005(8): 24-31.
Zhao Shengdun, Yuan Jianhua, Hao Yongjiang. Discussion on the characteristics of modern high-speed heat treatment furnace[J]. Forging and Stamping, 2005(8): 24-31.
[3]苏杨, 余萱, 卢翔, 等. 基于BP神经网络PID机房温度控制研究[J]. 工业仪表与自动化装置, 2022(2): 102-106.
Su Yang, Yu Xuan, Lu Xiang, et al. Research on temperature control of PID machine room based on BP neural network[J]. Industrial Instrument and Automation Device, 2022(2): 102-106.
[4]徐明威, 张禹, 李延斌. 一种六维力传感器的信号噪声处理技术[J]. 现代信息科技, 2021, 5(23): 33-36.
Xu Mingwei, Zhang Yu, Li Yanbin. A signal noise processing technology of six-axis force sensor[J]. Modern Information Technology, 2021, 5(23): 33-36.
[5]毛函晔, 翟哲崇, 丁之劼, 等. 基于粒子群优化算法的船舶粮食库
温湿度PID控制[J]. 船舶工程, 2016, 38(8): 71-72, 90.
Mao Hanye, Zhai Zhechong, Ding Zhijie, et al. PID control of temperature and humidity of ship grain depot based on particle swarm optimization algorithm[J]. Ship Engineering, 2016, 38(8): 71-72, 90.
[6]谭平, 熊瑞平, 霍开子, 等. 模糊PID控制的液驱平流泵仿真[J]. 液压与气动, 2022, 46(7): 136-142.
Tan Ping, Xiong Ruiping, Huo Kaizi, et al. Simulation of hydraulic drive advection pump controlled by fuzzy PID[J]. Hydraulic and Pneumatic Engineering, 2022, 46(7): 136-142.
[7]陈政文. 基于模糊PID控制的退火炉温度控制系统的研究[D]. 武汉: 武汉工程大学, 2014.
Chen Zhengwen. Research on temperature control system of annealing furnace based on fuzzy PID control[D]. Wuhan: Wuhan Institute of Technology, 2014.
[8]吕宝传, 高晓红, 董帅帅. 基于变论域模糊PID的供热系统设计和仿真[J]. 吉林建筑大学学报, 2021, 38(6): 75-79.
Lü Baochuan, Gao Xiaohong, Dong Shuaishuai. Design and simulation of heating system based on variable universe fuzzy PID[J]. Journal of Jilin Jianzhu University, 2021, 38(6): 75-79.
[9]张省伟, 朱慧勇. 数字温度传感器在机车轴承温度检测中的研究[J]. 测试功能与解决方案, 2019(4): 95-97.
Zhang Shengwei, Zhu Huiyong. Research on digital temperature sensor in locomotive bearing temperature detection[J]. Test Function and Solution, 2019(4): 95-97.
[10]杨娜, 武昆. 基于双模糊PID的食品包装机热封温度控制研究[J]. 包装工程, 2019(9): 187-193.
Yang Na, Wu Kun. Research on heat sealing temperature control of food packaging machine based on double fuzzy PID[J]. Packaging Engineering, 2019(9): 187-193.
[11]张莉莉, 武艳. 蔬菜大棚模糊PID温度控制系统设计与仿真[J]. 科技创新, 2010(7): 17-18.
Zhang Lili, Wu Yan. Design and simulation of fuzzy PID temperature control system in vegetable greenhouse[J]. Scientific and Technological Innovation, 2010(7): 17-18.
[12]赵世海, 韩雪. 基于模糊神经网络PID的焙烘机温度控制[J]. 天津工业大学学报, 2019(4): 83-88.
Zhao Shihai, Han Xue. Temperature control of curing machine based on fuzzy neural network PID[J]. Journal of Tianjin Polytechnic University, 2019(4): 83-88.
[13]吕科东. 基于RBF神经网络PID控制在加热炉温度控制系统中的应用[C]//天津市电子工业协会2019年年会论文集. 天津, 2019: 12-17.

[1]	Peng Longsheng, Liu Chunquan, Xiong Fen, Zhang Ying, Huang Wei, Lin Yinghua. Effects of rolling method and heat treatment process on microstructure and properties of medium-Mn steel [J]. Heat Treatment of Metals, 2023, 48(8): 106-112.
[2]	Lü Da, Han Yanguang, Cui Yi, Zhao Yingli, Chen Wen, Zhang Zefeng, Ji Shuang. Hot working process of GH4169 superalloy [J]. Heat Treatment of Metals, 2023, 48(8): 132-137.
[3]	Tao Cheng, Cui Xia, Ouyang Delai, Lan Xixin, Wan Xingcai. Mechanism of α lamellae spheroidization and strengthening plasticization of TC21 titanium alloy after post forging heat treatment [J]. Heat Treatment of Metals, 2023, 48(8): 138-143.
[4]	Zhu Lei, Wei Yibin. Effect of annealing temperature on microstructure and mechanical properties of silver layer in silver/steel composite plate fabricated by explosive welding [J]. Heat Treatment of Metals, 2023, 48(8): 154-160.
[5]	Zhang Mingkun, Yang Min, Wang Yu, Zhao Xiang, Jing Deqiang. Effect of heat treatment on stress corrosion sensitivity of 7005 aluminum alloy welded joint for high-speed train [J]. Heat Treatment of Metals, 2023, 48(8): 166-171.
[6]	Chen Wentao, Yin Jing, Wang Chunyan, Hu Guiling. Heat treatment and strengthening mechanisms of laser additive manufactured 6061 aluminum alloy [J]. Heat Treatment of Metals, 2023, 48(8): 172-178.
[7]	Zhang Yanxin, Ala Teng, Zhao Lei, Li Jiaxiao, Zhou Zhe, Lü Jinqi. Effect of temperature uniformity of natural gas-fired heat treatment furnaces on mechanical properties of aluminum alloy wheel hub [J]. Heat Treatment of Metals, 2023, 48(8): 179-184.
[8]	Tian Wei, Wang Xing, Zhi Xubo, Chen Zongle. Spheroidizing process of SWRCH35K cold heading steel [J]. Heat Treatment of Metals, 2023, 48(8): 190-193.
[9]	Ling Wendan, Wang Jinyong, Gao Jie, Qi Xilun, Chen Mingyi, Chen Xinhe. Cause analysis and improvement measures for defects of high strength 4145 steel used in oil drilling tool [J]. Heat Treatment of Metals, 2023, 48(8): 280-285.
[10]	Zhang Laichao, Jin Yunxue, Zhu Xuwei, Wang Bingsheng, Jia Boshan. Heat treatment of high performance rolled steel balls for large ball mills [J]. Heat Treatment of Metals, 2023, 48(7): 84-90.
[11]	Zhao Heming. Manufacturing technology of cutter ring with gradient properties based on induction tempering [J]. Heat Treatment of Metals, 2023, 48(7): 124-130.
[12]	Li Shiwen, Xiong Wei, Zhang Wenliang, Wang Chao, Gao Zhanyong. Grain refinement and strength-toughness improvement process of 20Si2Mn2CrNi steel after forging [J]. Heat Treatment of Metals, 2023, 48(7): 157-161.
[13]	Yang Xiong, Li Peng. Heat treatment process of 15CrMoR steel for medium temperature pressure vessel [J]. Heat Treatment of Metals, 2023, 48(7): 181-186.
[14]	Yang Dongjie, Bai Qiaofeng, Ouyang Changyao, Wang Rui, Wei Runze. Effect of heat treatment on hardness and wear resistance of laser clad Co-based alloy coating [J]. Heat Treatment of Metals, 2023, 48(7): 271-276.
[15]	Chen Jiaheng, Li Xianjun, Luo Ping. Contact type customized strength selective cooling equipment for ultra-high strength steel [J]. Heat Treatment of Metals, 2023, 48(7): 292-296.