Hot deformation behavior and hot processing map of 2Ni6Cr5Al2MoV bearing steel

doi:10.13251/j.issn.0254-6051.2024.11.002

Abstract

Abstract: Hot deformation behavior of 2Ni6Cr5Al2MoV bearing steel under deformation temperature of 900-1200 ℃ and strain rate of 0.01-10 s^-1 was studied by Gleeble-3800 simulation machine. The high temperature constitutive equation and recrystallization critical strain model were established and verified. Based on the theory of dynamic material model, the hot processing maps of the steel at true strain of 0.6 and 0.7 were drawn. The results show that the flow stress of the steel increases with the increase of strain rate and the decrease of deformation temperature. Increasing deformation temperature and decreasing strain rate are beneficial to the dynamic recrystallization. The maximum energy dissipation rate η of the steel is about 0.37, and the strain variable has little influence on the dissipation factor. The suitable hot working conditions for the steel are deformation temperature of 1100-1200 ℃ and strain rate of 0.01-0.1 s^-1.

Key words: 2Ni6Cr5Al2MoV bearing steel, hot deformation behavior, constitutive equations, critical strain model, hot processing map

CLC Number:

TG142.7

Han Weiran, Gao Yongliang, Li Meng, Zhu Chengxi, Wang Lin, Zhao Yan, Chen Dayu. Hot deformation behavior and hot processing map of 2Ni6Cr5Al2MoV bearing steel[J]. Heat Treatment of Metals, 2024, 49(11): 10-16.

References

[1]钟顺思, 王昌生. 轴承钢[M]. 北京: 冶金工业出版社, 2000.
[2]刘洪秀, 于兴福, 魏英华, 等. 航空轴承钢的发展及热处理技术[J]. 航空制造技术, 2020, 63(1): 94-101.
Liu Hongxiu, Yu Xingfu, Wei Yinghua, et al. Development of aviation bearing steel and heat treatment technology[J]. Aeronautical Manufacturing Technology, 2020, 63(1): 94-101.
[3]周景欢, 王伟伟. 论航空轴承技术现状与发展[J]. 山东工业技术, 2019(3): 62.
[4]Kim K, Park H W, Ding S, et al. Flow stress of duplex stainless steel by inverse analysis with dynamic recovery and recrystallization model[J]. ISIJ International, 2021, 61(1): 280-291.
[5]林武, 李红英, 曾翠婷, 等. 一种低碳微合金管线钢的热变形行为[J]. 中南大学学报: 自然科学版, 2010, 41(3): 940-947.
Lin Wu, Li Hongying, Zeng Cuiting, et al. Hot deformation behavior for a kind of low carbon micro-alloy pipeline steel[J]. Journal of Central South University, 2010, 41(3): 940-947.
[6]Xi T, Yin L, Yang C G, et al. Hot deformation behavior and processing map of a Cu-bearing 2205 duplex stainless steel[J]. Acta Metallurgica Sinica (English Letters), 2019, 32(12): 1537-1548.
[7]何婵, 邹德宁, 赵洁, 等. 2507超级双相不锈钢的流变应力本构关系及热加工图[J]. 金属热处理, 2022, 47(1): 94-99.
He Chan, Zou Dening, Zhao Jie, et al. Flow stress constitutive relationship and processing map of super duplex stainless steel 2507[J]. Heat Treatment of Metals, 2022, 47(1): 94-99.
[8]李胤宪. 630 ℃超超临界转子钢高温变形行为及显微组织演化规律研究[D]. 秦皇岛: 燕山大学, 2021.
Li Yinxian. High temperature deformation behavior and microstructure evolution of 630 ℃ ultra supercritical rotor steel[D]. Qinhuangdao: Yanshan University, 2021.
[9]Zhao Chao, Zhang Jin, Yang Bing, et al. Hot deformation characteristics and processing map of 1Cr12Ni2Mo2WVNb martensitic stainless steel[J]. Steel Research International, 2020, 91(7): 202000020.
[10]Xi S P, Gao X L, Liu W, et al. Hot deformation behavior and processing map of low-alloy offshore steel[J]. Journal of Iron and Steel Research International, 2022, 29(3): 474-483.
[11]林洪. 3Cr20Ni10W2耐热合金钢高温塑性变形本构描述[J]. 金属热处理, 2014, 39(2): 107-111.
Lin Hong. A constitutive description for hot flow behavior of 3Cr20Ni10W2 alloy steel[J]. Heat Treatment of Metals, 2014, 39(2): 107-111.
[12]Zener C, Hollomon J H. Effect of strain rate upon plastic flow of steel[J]. Journal of Applied Physics, 1944, 15(1): 22-32.
[13]Sellars C M, Mctegart W J. On the mechanism of hot deformation[J]. Acta Metallurgica, 1966, 14(9): 1136-1138.
[14]吴琨. 经济型双相不锈钢2101高温变形行为及机理研究[D]. 西安: 西安建筑科技大学, 2013.
Wu Kun. Study on hot deformation behavior and mechanism of economical duplex stainless steel 2101[D]. Xi'an: Xi'an University of Architecture and Technology, 2013.
[15]Medina S F, Hernandez C A. General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels[J]. Acta Materialia, 1996, 44(1): 137-148.
[16]Sellars C M, Zhu Q. Microstructural modelling of aluminium alloys during thermomechanical processing[J]. Materials Science and Engineering A, 2000, 280(1): 1-7.
[17]Khatami-Hamedani H, Zarei-Hanzaki A, Abedi H R, et al. Dynamic restoration of the ferrite and austenite phases during hot compressive deformation of a lean duplex stainless steel[J]. Materials Science and Engineering A, 2020, 788: 139400.
[18]Prasad Y V R K, Rao K P, Sasidhara S. Hot Working Guide: Compendium of Processing Maps[M]. ASM International, 2015.
[19]Seshacharyulu T. Modelling of hot deformation for microstructural control[J]. International Materials Reviews, 1997, 43(6): 243-258.